OWS Test Procedure - BilgMon 448 - Brannstorm

Поделиться
HTML-код
  • Опубликовано: 31 авг 2021
  • MARPOL is one of the main convention for shippinh business
    Oily Water Separator as one of the MARPOL equipmeny require routine test and inspection.
    the procedures may vary on different companies, but you will get the basic idea.
    hope you enjoy the video and having clear guidance of the procedures.
    made onboard Ocean Jade on July 2021 at Pacific Ocean

Комментарии • 17

  • @nmmunna345
    @nmmunna345 Месяц назад +1

    It was a jolly info video. Amazing job

  • @davidmonro3270
    @davidmonro3270 2 месяца назад

    The cost of this machine would be astronomical and you probably need to be a scientist to repair it. I had thirty years going to sea and never saw an oily water separator working correctly. Another engineer, a friend of mine solved the problem using three tanks. Absolutely foolproof. So successful shipbuilders started putting in ships.

    • @achellsuez
      @achellsuez  2 месяца назад

      For all the hard-working Engineers in the past in developing this machine, i wish more and more clean sea.

  • @pratikpaul4753
    @pratikpaul4753 2 месяца назад

    Very helpful video. ❤

  • @abilihyau9208
    @abilihyau9208 Месяц назад

    Indonesian crew have?

  • @blueprince178
    @blueprince178 2 года назад

    Nice video. I have a question. After flushing fresh water remain inside ows or discharged by which v/v? I mean Flushing water go where through which v/v?

    • @achellsuez
      @achellsuez  2 года назад

      My point of few (for not being an engineer), the FW flushing to be done overboard before shutting the system.
      The valves will be the same valves to prepare the OWS operation.
      Otherwise, the FW flushing might go back to the bilge tank.

  • @katsuragisan1
    @katsuragisan1 5 месяцев назад

    During pumping out shall i keep open fresh water supply valve to monitor together with sample or only to open sample water and close fresh water.

    • @achellsuez
      @achellsuez  5 месяцев назад

      If all running smoothly then the FW should be closed during OWS Operation.
      and as per the manual from this specific unit, FW to be used for flushing before shutting the unit off.

  • @user-oz5xg7ww8f
    @user-oz5xg7ww8f 8 месяцев назад

    very helpful thank U ^^

    • @achellsuez
      @achellsuez  8 месяцев назад

      You're welcome, bon voyage

  • @aakashrawat7133
    @aakashrawat7133 5 месяцев назад

    Before OCm stimulation what you exactly did ..??

    • @achellsuez
      @achellsuez  5 месяцев назад

      Can you be more specific because a lot of preparation made before running test the OWS as you may watch from the begining

  • @davidmonro3270
    @davidmonro3270 2 месяца назад +1

    There is an old saying at sea" "keep it simple stupid". The pounding in heavy seas leaves no room for such dainty complicated equipment.

  • @alexantony3469
    @alexantony3469 2 года назад

    video credits?

    • @achellsuez
      @achellsuez  2 года назад

      Feel free to share with your mates