Didn’t help at all ….I’m new at this and all your video was about Talk talk talk no showing differences between high and low and you didn’t try and change the bulb.waste of time
Thanks so much for your very helpful video! I was dreading it! Now is there anyway to replace low beam without taking tire off and taking the inside plastic wheel well and getting having to hold it out the way? Thank you again for the most helpful video I have seen!!
FYI you can run a H7 bulb with a fan on the rear. I just installed the FAHREN Termitor myself. Not going to lie wasn't the easiest but it is totally doable and with the dust cover installed also.
Tbhanks for all the tips. Josh, what wattage of del do you think should be ggod? if a put 100watt dels do you think the alternator will cope with that? Thanks for your help.
So I just bought my 2014 Chevy traverse. And I was pulled over two nights ago for having no right headlight. The regular headlight was out as well as the bright headlight. The amber light though works. Does it mean that there is a wiring issue and not a bulb issue for the both of them to be out? And where do I take it to have the bulbs replaced? I am not feeling well enough to do this myself. Thanks.
Informative, appreciate the help. Went smoothly until i dropped the second highbeam bulb somewhere under the engine 🙃 Is there a way to adjust the height of the highbeam? Does anyone know?
Hey Josh Auxito # X002L5Q5DJ Has fan & does work just installed in 2014 Traverse.. very specific & a pain in butt but works 100% clip even snaps around fan..
You do not need to buy a h7 bulb exactly like the halogen one u can unscrew the lock from the led light and place the lock in first then put in the bulb
I know to replace low beam bulbs I had to go through wheel wells, a pain in the butt!! I replaced high beam bulbs like video showed and it’s easy peasy!! I want to know if you can change low beam bulbs using same method, if not I will take tire off this time to change low beam 😂
There is way too much chatter. OMG stop talking. You showed pictures between steps. You showed a picture of the wire clip. However, there is no video of how to remove the clip. Your video is not helpful.
I call bullshit on the clip not working with a fan on the back I just did it worked fine! So bullshit! My wife has a Hyundai accent has a clip that hold them guess what it has cooling fans in it an they work so I call bullshit again!
I’m sure your Hyundai and a Chevrolet have the same exact mount assembly. I’m amused by your explicit admiration to call bullshit. I explained how I installed it. If you installed a bulb correctly and if you have a Hyundai why did you even click on this video?
Didn’t help at all ….I’m new at this and all your video was about Talk talk talk no showing differences between high and low and you didn’t try and change the bulb.waste of time
yeah agreed blah blah blah just show how it's done smh
Thanks so much for your very helpful video! I was dreading it! Now is there anyway to replace low beam without taking tire off and taking the inside plastic wheel well and getting having to hold it out the way? Thank you again for the most helpful video I have seen!!
Glad I have an older traverse. I don't understand why they changed the headlight design and the new er cars. The older twister ones work just fine
FYI you can run a H7 bulb with a fan on the rear. I just installed the FAHREN Termitor myself. Not going to lie wasn't the easiest but it is totally doable and with the dust cover installed also.
Good info... thank you... easier than it sounds
Thanks for this video, I have been wondering how to do this.
How do you replace the front turn signals?
Would be nice to know year!!
It works even if there is a fan. You just have to bend the wire holder which is easy to do by hand. Thanks for the vid
Finally thank you
Tbhanks for all the tips. Josh, what wattage of del do you think should be ggod? if a put 100watt dels do you think the alternator will cope with that? Thanks for your help.
So I just bought my 2014 Chevy traverse. And I was pulled over two nights ago for having no right headlight. The regular headlight was out as well as the bright headlight. The amber light though works.
Does it mean that there is a wiring issue and not a bulb issue for the both of them to be out? And where do I take it to have the bulbs replaced? I am not feeling well enough to do this myself.
Thanks.
Informative, appreciate the help. Went smoothly until i dropped the second highbeam bulb somewhere under the engine 🙃
Is there a way to adjust the height of the highbeam? Does anyone know?
Hey Josh Auxito # X002L5Q5DJ Has fan & does work just installed in 2014 Traverse.. very specific & a pain in butt but works 100% clip even snaps around fan..
You do not need to buy a h7 bulb exactly like the halogen one u can unscrew the lock from the led light and place the lock in first then put in the bulb
How do you remove those clips, though? I've been trying and struggling, but no go
You have to press in and slide it to the side slightly and it will swing down off of it.
You could of showed everyone actually do the steps, step by step. And less talking🙄 it was kinda helpful
Can't you go through your wheel well?
I know to replace low beam bulbs I had to go through wheel wells, a pain in the butt!!
I replaced high beam bulbs like video showed and it’s easy peasy!! I want to know if you can change low beam bulbs using same method, if not I will take tire off this time to change low beam 😂
@@buddyfoxhound2426 I just put my high beam in tonight. No problem through the wheel well. Didn't take the wheel off. Just turn the wheels
There is way too much chatter. OMG stop talking. You showed pictures between steps. You showed a picture of the wire clip. However, there is no video of how to remove the clip. Your video is not helpful.
Wow, having a bad day or what?. Don't watch the video then damn
Waste of time. Poor instructions. Had to find the 10 seconds I was looking for in a 10 minute video and it still didn't show me how.
Enough of the talking ... let's see some action!! This is a "How To" do things for shade tree and professional mechanics.
Worst ever !
I call bullshit on the clip not working with a fan on the back I just did it worked fine! So bullshit! My wife has a Hyundai accent has a clip that hold them guess what it has cooling fans in it an they work so I call bullshit again!
I’m sure your Hyundai and a Chevrolet have the same exact mount assembly. I’m amused by your explicit admiration to call bullshit. I explained how I installed it. If you installed a bulb correctly and if you have a Hyundai why did you even click on this video?
@@thejoshwileychannel ummm obviously because I have a traverse as well?
So if you successfully did it already as you previously stated what’s the point in searching for this video