First I must say that your content is very enjoyable to watch. A hobbyist demonstrating their skill in real world applications. As well as including 20+ jumps where the goal is to preserve the vehicle and not destroy it in 3-5 4 story jumps because it was free like most others. I've been eyeballing this truggy for some time and like you expressed it has weak points. I was kind of shying away because spare parts seem to be hard to come by. However, you made me realize that other brands parts will fit. Guess I'll go down that parts match rabbit hole. Thanks man
Thank you so much for appreciating what I do, bro 😊. There were times when I questioned myself why I bought this truggy because it would break almost after each run. Then it just taught me how to be resourceful, creative, and careful. As for the parts availability, there should be no problem because they're all found on Banggood and Aliexpress. It's the looking for upgrades from other brands that is hard to do..
Hey Ian awesome show perfect timing as I wanted to see how this does after putting on those TA arms being cross brand as only engineers see this route🤔 but at 0:37 seconds I think your motor pinion does not look straight to the spur from here if you see what I mean it looks like the pinion may have a slight angle to it
Thanks Bro PX. Yes you're correct. the pinion is not perfectly aligned to the spur because the motor bracket moves in the motor mount. It's too loose and worn out. So I just put a support under the motor to keep it fixed, giving a bit of angle. Anyway I am converting this RC to brushed power, so I will need to remove the original motor bracket and put on a customised one for the brushed motor. 😁 Cheers!
2:04 Ian maybe look into the Arrma exb servo spring as it’s meant to be the upgrade for stock spring on non exb’d rigs and see if it fits as not to have your saver wound all the way down 🤔💥🎯 5:06 try and put them in the other way around 😎 so your pushing them in from the rear and not the front 🤩🤨 or see if you can turn the actual post 90 degrees so now you’d be putting them in like on a kraton shell🎸
Thank you brother. Wobbling wheel joints is part of wear and tear. It's been with me for 2 years and i have not replaced the bearings yet. And the joints are originally loose. So it gets worse over time. I need to rebuild each suspension 😁. Well, it still runs, though. So bash it 😅
Hey brother what's up I have the zd racing 9021 and I ordered the rear horizontal drive shafts and they came in mail and there a little bit longer than the stock And won't work I don't know what to think but maybe u know what to do
Oh bro that's mad. The 9021 has the widest arm span among all the zd 1/8 scale models. That means that if the rear wheel dogbones are too long for the 9021, they are defective. There could be some errors in the machining of those. They should fit well into the rear diff cups and wheel hubs. Just message the seller regarding it and file a dispute.. Is that from aliexpress or amazon?
Have you tried these? Down on this link € 8,17 35%OFF | 2Pcs 8159 Metal Rear Horizontal Shaft for 1/8 ZD Racing 9021 08423 RC Car Upgrade Parts Spare Accessories a.aliexpress.com/_mNt0e0O
They must have been faulty or they messed up somewhere I don't know I wish I could show u there about half inch bigger I'll put in complaint and see what they say thank u brother thanks for responding fast unlike other guys thanks
@@ianbudgetrc2574 I doubled it in the skatepark jumping high and falling on concrete. I hope it will help you in the future, I have also learned a lot with your videos, especially with the upper arms, although I have not broken any of them yet.
@@manofmanythingz4812 I somehow agree brother. But there are different types of skills. We can't just declare one as the best and disregard the other. Onroad RC gt racers are very skilled but they can't be compared to the offroad buggy racers where it requires a totally different skill set because the offroad ones require precise jumping and landing along with proper cornering on loose dirt. Whereas the onroad racing only requires cornering and throttling, but sure one needs to be highly skilled to do it. The same could be said for hardcore bashers like Rich Duperbash and RCdude81. They have their own exceptional skills in sending and controlling their rc bashers midair and during the landing.
I don't know why your truck has plastic spurgears and I have metal..I changed my arms -Hub -Drive CVDs everything to TEKNO 48 2.0..looks Great ..My Batteries Teee 7000mah 100c will be here Monday..
Originally it had metal 46t spur but I changed to 48t plastic spur gear. It's because I want the plastic gear to be the weakest link. It would wear out and break first before the rest of the gears would. Plastic spur is easy to replace as well. Btw, great mod from tekno! But theyre a bit expensive all together. This one's enough for me for now.
Thank you for explaining us the ZD Racing is not make to jump! That saved me from breaking mine. Have you ever watched Rich Duperbash RC jumping ? ruclips.net/video/EgyDUNAL4b4/видео.html
Thanks mate. Yes I always watch Rich's and Eric's bashing videos. They are crazy to the highest level. You'd need mega skills and thousands of $ to pull off those stunts with confidence 😱
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Timeline:
2:50 Bashing and big Jumps
9:26 Breakage.. What broke? 👀
10:56 after the run
First I must say that your content is very enjoyable to watch. A hobbyist demonstrating their skill in real world applications. As well as including 20+ jumps where the goal is to preserve the vehicle and not destroy it in 3-5 4 story jumps because it was free like most others.
I've been eyeballing this truggy for some time and like you expressed it has weak points. I was kind of shying away because spare parts seem to be hard to come by. However, you made me realize that other brands parts will fit.
Guess I'll go down that parts match rabbit hole.
Thanks man
Thank you so much for appreciating what I do, bro 😊.
There were times when I questioned myself why I bought this truggy because it would break almost after each run. Then it just taught me how to be resourceful, creative, and careful.
As for the parts availability, there should be no problem because they're all found on Banggood and Aliexpress. It's the looking for upgrades from other brands that is hard to do..
Hey Ian awesome show perfect timing as I wanted to see how this does after putting on those TA arms being cross brand as only engineers see this route🤔 but at 0:37 seconds I think your motor pinion does not look straight to the spur from here if you see what I mean it looks like the pinion may have a slight angle to it
Thanks Bro PX.
Yes you're correct. the pinion is not perfectly aligned to the spur because the motor bracket moves in the motor mount. It's too loose and worn out. So I just put a support under the motor to keep it fixed, giving a bit of angle.
Anyway I am converting this RC to brushed power, so I will need to remove the original motor bracket and put on a customised one for the brushed motor. 😁
Cheers!
Perfect job and bash dude👑
Thanks bro ☺️
2:04 Ian maybe look into the Arrma exb servo spring as it’s meant to be the upgrade for stock spring on non exb’d rigs and see if it fits as not to have your saver wound all the way down 🤔💥🎯
5:06 try and put them in the other way around 😎 so your pushing them in from the rear and not the front 🤩🤨 or see if you can turn the actual post 90 degrees so now you’d be putting them in like on a kraton shell🎸
Brilliant idea bro. I never thought of that. Thank you.
I will see if I can next time. 😁
Saves my finger from pain winding it down 😆
Hey bro good video nice to see you jump that many times and no breakage but why are your tires wobble so much have you found out why it do that
Thank you brother.
Wobbling wheel joints is part of wear and tear. It's been with me for 2 years and i have not replaced the bearings yet. And the joints are originally loose. So it gets worse over time. I need to rebuild each suspension 😁.
Well, it still runs, though. So bash it 😅
Hey brother what's up I have the zd racing 9021 and I ordered the rear horizontal drive shafts and they came in mail and there a little bit longer than the stock
And won't work I don't know what to think but maybe u know what to do
Oh bro that's mad. The 9021 has the widest arm span among all the zd 1/8 scale models.
That means that if the rear wheel dogbones are too long for the 9021, they are defective. There could be some errors in the machining of those. They should fit well into the rear diff cups and wheel hubs.
Just message the seller regarding it and file a dispute.. Is that from aliexpress or amazon?
Have you tried these? Down on this link
€ 8,17 35%OFF | 2Pcs 8159 Metal Rear Horizontal Shaft for 1/8 ZD Racing 9021 08423 RC Car Upgrade Parts Spare Accessories
a.aliexpress.com/_mNt0e0O
They must have been faulty or they messed up somewhere I don't know I wish I could show u there about half inch bigger I'll put in complaint and see what they say thank u brother thanks for responding fast unlike other guys thanks
@@jaynells4313 no worries brother. This is a help channel. I reply as soon as I see it. Not all the time tho. Best of luck!
Have you thought about putting a bumper on your zd
Thank you. Originally it had a bumper but it broke. This time I forgot about it and just realised I need it 😅.
Nice!!!!!
Thanks so much 😁
Put the proline body mounts on mine with threaded knobs works great.👍
Thank you I'll have a look 😊
the problem with jumping with this car is that it bends the chassis. I have reinforced it! You can see the video on my channel and for now it works!
Thanks brother. I will have a look at your vids.
But in this case, it's only light basging. It didn't bend the chassis at all.
@@ianbudgetrc2574 I doubled it in the skatepark jumping high and falling on concrete. I hope it will help you in the future, I have also learned a lot with your videos, especially with the upper arms, although I have not broken any of them yet.
@@xure24 nice! I might try that one day
Nice bro
Thanks brother Stergio 👌
Bashing is expensive, I can't do that to my cars, but I do enjoy others doing it. Cheers M8.
Thanks so much mate. It also took me long practice with my Arrma Kraton EXB before I learned how to jump RC cars.
And I applied it on the ZD Racing.
I agree.. I would never bash any of my buggies or my truggy ..skill is in driving..
@@manofmanythingz4812 Also true..;o)
@@manofmanythingz4812 I somehow agree brother.
But there are different types of skills. We can't just declare one as the best and disregard the other.
Onroad RC gt racers are very skilled but they can't be compared to the offroad buggy racers where it requires a totally different skill set because the offroad ones require precise jumping and landing along with proper cornering on loose dirt.
Whereas the onroad racing only requires cornering and throttling, but sure one needs to be highly skilled to do it.
The same could be said for hardcore bashers like Rich Duperbash and RCdude81. They have their own exceptional skills in sending and controlling their rc bashers midair and during the landing.
I don't know why your truck has plastic spurgears and I have metal..I changed my arms -Hub -Drive CVDs everything to TEKNO 48 2.0..looks Great ..My Batteries Teee 7000mah 100c will be here Monday..
Originally it had metal 46t spur but I changed to 48t plastic spur gear. It's because I want the plastic gear to be the weakest link. It would wear out and break first before the rest of the gears would. Plastic spur is easy to replace as well.
Btw, great mod from tekno! But theyre a bit expensive all together.
This one's enough for me for now.
Good💯💯💯
Thanks sir
Link to previous installation video:
ruclips.net/video/bAoh90lhJGs/видео.html
Thank you for explaining us the ZD Racing is not make to jump! That saved me from breaking mine.
Have you ever watched Rich Duperbash RC jumping ?
ruclips.net/video/EgyDUNAL4b4/видео.html
Thanks mate. Yes I always watch Rich's and Eric's bashing videos. They are crazy to the highest level.
You'd need mega skills and thousands of $ to pull off those stunts with confidence 😱