How to make High Quality Emergency Light
HTML-код
- Опубликовано: 6 фев 2025
- This video helps you to make own high quality emergency light. How to make High quality Emergency Light
🔥 SUBSCRIBE FOR MORE VIDEOS ► bit.ly/3691GQm | ★
Led Strip : amzn.to/3hXySPJ
Share, Support, Subscribe!!!
Subscribe: goo.gl/WfYhoR
RUclips: / easytechzone
Twitter: / easytechzone
Facebook: / easytechzones
Instagram: / easytechzones
Google Plus: plus.google.co...
Cover songs collected from NCS youtube channel: / nocopyrightsounds
Song 1: • Video
Song 2: • Elektronomia - Limitle...
Song 3: • Electro-Light - Symbol... 
Наука
very nice vedio
*Nice Video Sir Aapne Bahut Hi Achhe Se Samjhaya Hai Very Good*
No battery check, no low voltage protection, no cooling for led, no temperature potecion. Really good deal... "High quality"
And bad quality led without any good cri and lm output
6
@@wallkiller8080ضض0
Not shown Bat charging Led one is enough for cct. Not good at all.
The used bms board has low voltage protection. The only protection it doesn't have is overtemperature protection. I'd use a thermal fuse instead.
Super Technology 👌👍👌👍
Thanks
For a moment I thought I was going to be really impressed with some sort of Binary decoded control... 3 switches with 7 output strips. Don't get me wrong, cool project regardless, but I think you missed out on the total geek award! :)
Of course, it's better then my light! Good job!
ruclips.net/video/qY66DaUGtFs/видео.html
Kğkkgkkķgkk
I made light like this but my led is flickering. When I turn it on it is flashing up and suddenly it is getting dim. BTW I have only 36 led one switch and 3 batteries (1200mah) each.
When i am connecting 18 led at a time its glowing properly but heating too much. Please help me out
You using 1200 mah 0.5 mah gives you 600mah *3 total 1800 mah. For 36 led need more current
Use 4 battery
@@easytechzones thanks bro. And why my led is heating up
@@easytechzones I didn't get it fully please elaborate bit large. Thanks in advance
@@easytechzones didn't work.
As an electrician, I would not wire the negatives like that. I would do what you did to the positive, splice them all together, then put them all in a screw on wire cap with one wire sticking out, wire that to the switch (neutral) then wire that to a battery, make sure it’s the correct voltage or that the lights a dimmable. Then wire the hot the same way, except skip the switch and go into to the battery. I like dealing with 12v. Get a an 8 AA battery holder. If you get 2 and wire them correctly, you can either double the voltage, in this case I wouldn’t, or double the amperage, which I would do. Just my 2 cents. Thanks. Oh also I would use silicon covered wire. That’s what I like to use. For this, use something like 16, 18, or 20 gauge wire. And get them in the correct colors. Not bare copper and white. Red for neutral and black for hot. ALSO please don’t solder the neutral to the switch. Please crimp it like you’re suppose to do
agreed.. though this is DC so black should be neutral. and it looked like the copper wire was enameled.. though I think it should still be done like you described. that's how I've always done it.
my 2 cents. you should also put some resisters on there.
How many hours did it take 4:09
I do the same u did..but using only one 3.7v lithium battery. i use 8 strips and every strip there is 7 LEDs. when i on three switches then heavy heat produces and some LEDs are not working...what shoul i do..?
how much current supply good for these type of 4V LED strip from 3.7V lithium battery..? plz sir...give me ur rply...
Mera bhi same problem ho raha hai lekin koi solution nahin mil raha hai solution ho to please bataiye
Very cool and useful project. Thank you for sharing your expertise with the world. I watched couple of times. Thank you again.
Thankyou 🙏
ruclips.net/video/qY66DaUGtFs/видео.html
sir battery are conected series or paralal ? and voltage
Bro parallel connect
@@kishorroy1592 ok brother ..❤️😊
Nice and effective,
18650 battery works well.
Veri nice
حبجي
ALI HASSAN
ग्फ़्ह्फ़्ज्द्य्द्य्र
Nice
,👌👌👌बहुत बढ़िया , इसको आसानी से बनाया का सकता है,
Soldering iron, razor blade, all in one tool. May not be professional but at least he's being creative. This man lives in a village, has limited tools, has ants and still has 285k subscribers, good for you! Cool videos sir!
Great video, thanks for sharing...
welcome
11:02 🐜 Insect is helping of this light project 😆
😂😂😂😂😂
ruclips.net/video/U2ULxW-rbog/видео.html
Very nice great👍 Sir
Thanks
That mini drill chuck needs to be more tighted. The proyect liked me very much, wow I will do someting like this😁👍👍👍👍👍
Thankyou 🙏
Ну что сказать, идея хорошая, а вот реализация полный швах! 1-е, имея дримель(пусть и самопальный) делать отверстия под выключатели паяльником это не правильно. 2-е, что мешало взять нормальный холдер на 3 ячейки с контактами и не мучаться с пайкой аккумуляторов? 3-е, одна плата ТР 4056 не вытянет зарядку 3-х ячеек в паралель. 4-е, нету теплоотвода, итог через час светодиоды начнут выгорать.
Maine yah video dekhkar ek emergency light banaya hai Lekin LED or were bahut jyada garm ho ja raha hai isko theek kaise karen koi solution hai to please bataiye
Great work but dimmer would work perfectly
Are those led strips 7 of them are connected in serial or parallel?
One strip has 12 leds of 4v each..so per strip 48v ..
How you are maintaining constant current?
Seems like no resistor used.
Source voltage seems 3.7 to 4.2 as 3 battery are connected in parallel, source current seems 2+2+2=6 Amp.
I m new, sorry of my question is basic. If you reply, it helps a lot.
If constant current is not maintained then led may burn out or doesn't last long so asked
Mera bhi LED light bahut jyada garm ho ja raha hai kaise isko theek Karen koi solution hai to bataiye please
That's really cool.
Why no BMS for your 18650 to protect the batteries?
Awesome DIY!
But...
What about heatsinks for LEDs if it gets hot?
No light diffusers?
No option to reduce light's intensity high and low?
Must be A thermal phasta
it's 4volt led and that 18650 battery cannot draw lots of amps that's why he don't need to add heat sink 🙏धन्यवाद
1.দাদা আপনি কি বাঙালি ?
2.আপনার Project গুলো দারুন👌
3.Comment টি ভালো লাগলে Like দিতে ভুলবেন না
Ha amio mondal
@@easytechzones are you residing in west bengal and which district.
Very good and nice I will like it
Thankyou 🙏
Thankyou 🙏
ماشاءالله تبارك الرحمن
الله يحفظك ويبارك فيك
وجزاك الله خير الجزاء
Very very excellent 😊😊😊😊
Thanks
fly on the table is the best part of the video :D
Nice project 👍👍
I will try to make for my own use.
ruclips.net/video/Ttoym8vdceQ/видео.html
Fantastic, great job!!!
Very good made
,
Resister not necessary?
If want use which type resister can use?
Hi could you provide a link to the led strips used please?
Check description
Bro nice work but i don't think so it will work if you run it more then 10 min , because you didn't use any heat sinks to increase heat depisation , and after 10 min the led will burn out with it heat. The another point is that you used double tape when led turn on for long time these tape melt .
But nice work
LED light And were bahut jyada garam ho raha hai iska koi solution hai to please bataiye
There is a tiny bug in this project... Look carefully from 0:45 to 0:46 :D XD XD
Then again at 2:07
Can you find more? :D
2:24
2:39
...and more
Your eyes ! Bravo
I think its his pet bug 🤣🤣🤣
can it be debug the project??
It's a QC guy.
Once all tests pass then he will bring the sticker with him, labelled: QC Passed
Dekha khub Valo laglo
Very nicely made, instead of the 3 switches, a single switch with a dimmer / potentiometeter could also be used.
Yes
ruclips.net/video/qY66DaUGtFs/видео.html
May ne same to same light banaya hay.bt small and single switch use..kindly aup Jo drill mechine use kar Rahe hay us ki eak video dalo na plz bhai
Very good
Thankyou
:)
My calculations are wrong? 5v supply on a 4v led module won't that burn led's? Also backup time?
Can we charge it from a smartphone charger??
yes
But reverse charging b ho sakti h isse
Wow amazing beautiful brother very nice work
Kon jaygate powa jaybe sarket golu
Online ba electronics shop
Very Good
one plastic, there is nowhere to remove heat, it will work
Nice and superb good job
Thankyou
Hello Easy Tech, please display the tools that you used, especially the drill. That looked cool. Yes i saw that insect too and that guy was walking around without a care in the world :). Very good video and worth investing in.
That was the debug you saw. 😄
Sir you are great
Sir led light is awsome
Sir I try to make this light.....
So thanks sir.
This music drove me insane!!!!
Nice video ...
4.1M views has completed congratulations😱
The project itself is interesting, even commendable. The video as a whole however, well, it was really quite disturbing.
To be honest, I'm not sure which was worse; That dreadful audio or the number of insects that scurried across my screen! I wasn't able to make it to the end.
Hahahaha!! You are right. I solved that by muting the audio, reproducing the video at twice the speed, and counting the insects, so as to make it fun instead of disturbing. :D
@@rodolfoa.jofresepulveda5685 now you have made me curious. What was the final count on the insects?
@@bob2161 I could count approximately from 8 to 10 appearances, but I wouldn't be able to tell you if it was the same cokcroach or a different one everytime... :D XD XD
the same insect, it was coming to inspect the project..!!!
ruclips.net/video/qY66DaUGtFs/видео.html
Good job in good music love 💕
Forget the music!!! I think silence would be much preferred.
then turn down your volume...
he think that if he love that stupid music - everyone will love it to listen, mute it.
Aged people does't like sound . Silence is better to concentrate.
Stop music, it's boring, instead this, explain the project.
i made three lights by watching this video..working fine
That soldering is going to give me nightmares. Anyways, cool project
Robban L me too that weld lines xdd
His soldering skills made me cringe
Jo aapney circuit used kiya hai ooo market mey kis nam sey milta hai
1000 like 👍👍😘
Thankyou
Yes 1000 likes
Aswq
For Russian and English spearking.
Простите пожалуйста. Очень понравилась Ваша поделка. Если уж делать такой классный фонарь, то надо было сделать две полосы сверху, две снизу, а три посередине и чтобы центральная включалась центральным выключателем, а верхняя и нижняя соответственно левым и правым.
Excuse me, please. I liked your craft very much. If we were to make such a cool lantern, then it was necessary to make two stripes on top, two on the bottom, and three in the middle, and so that the central one was turned on by the central switch, and the upper and lower ones were left and right, respectively.
I think there's a bug in your layout at 0:46)))
Yes. In cutting time sort the +ve and -ve point. So clean properly the strip led
I don't think he was talking about the positive( + ) or negative( - ) connections, he's talking about the bugs crawling all over your work space and project. Try cleaning up trash and any drinks or food from your work table, bugs feed on it
with limited resources and tools (mostly if not all are made by yourself) i congratulate you on doing this job, but i've to mention that TP4056 won't supply enough power for that project, most likely will trip on trying to switch on more LEDs...i smell something fishy around.
12:10 the "pro" look LMFAO 🤣😂
Very use full project thanks for sharing with us
Give a link where to buy an LED band?
Good video
Thankyou 🙏
A cucaracha on the table at min: 0:46 :0
:D
Again at 2:08 but i think it is a cricket
No that's not a cricket that's cockroach for how fast it moves
haha stay focused😅
@@dylanbritton7204 Well.. the video is slightly sped up... so I think it's normal it moves fast...
*helper and not a cockroach* 0:44 😉👍👀
Hi, did you forget to install the driver for the leds ?
Where i can purchase this white box ??
Electrical shop
Ay algo de Delfin Lopez, aunque le agrgastes algo más y es que le puedes trasportar. excelente.
Xxxxxxxx
ভালো লাগলো চেষ্টা করবো
Akdom
Ak bar atao dekho ruclips.net/video/FUZHN9322nk/видео.html
Hi Sir its an amazing experience to see such great hobbies demonstrated, where can I buy such circuit pcs?
ruclips.net/video/qY66DaUGtFs/видео.html
सातवां महीना का वीडियो
Nice ....muze o choti drill machin kaise banaya uska video ho to link bhejo.......
With help of the fly :D
UFO kii
where u can get battery charging module?
Nice
Thanks
What kind of drill machine that is ?? Send link to buy
Thank you...Sir
Welcome
Can we make simple power bank for cell phones with Normal rechargeable batteries for travel purpises?
Yes.
@@easytechzones
Engane ennu koodi parayamo, please.
0:45 that insect was video bombing
OK
😖
and now 2:07
2:40
ruclips.net/video/qY66DaUGtFs/видео.html
Sir , Please say the name of second background music you have used
0:44 хех, таракан там откуда?
Это почтенный таракан, берущий свою родословную из тех времён когда европейцы не мылись))
То не таракан, то кракозябра с прозрачными крыльями. на скорости 0,25 можно успеть на паузу поставить.
@@minimuk мутировал в мастерской))
Это фиксики))
Ye light ko 6 volt ki battery se chala sakte hai kya
What's with the ant and how come u didn't react to it?
Pls tell me where you get the plastic box
Battery joint peace name enna
Bro tell me 3 battery is connected piece name?
18650 laptop's battery
Your video is very good
🌟 رائع💐
I would to know where you bought these leds. Much better than the regular flexible led strips.
ruclips.net/video/Ttoym8vdceQ/видео.html
Making one switch charger please sir give me idea
Need add all led strip + in a single point
Very nice 👍
Difficult for beginners , but not as hard as it looks i will try what more will happen? (Fail) but atlast something will happen!
Its so easy
How long does it take to fully charge?
ruclips.net/video/Ttoym8vdceQ/видео.html
There are 47 seconds of insect. 😳
Chines effect they eat insect at-a-time
Sashikanta Nayak 😂😂
who has watching in 2024😂
Not me 😂
Instead of use transparent acralic, you can use milky acrylic sheet as a diffuser
ruclips.net/video/Ttoym8vdceQ/видео.html
Ak module se 3 battery change hoga to kharab ho jayega jaldi to kese hoga chage seise
Single power led (3W) is more efficient and easier to do. It looks great, but it isn't worth of money
Great fantastic 👍
#technicalshahzada
Just Mind Blowing
Tp4056 3 battery ko charge ni kary ga heet ho kar khrab ho jai ga
high quality :DDDDDDDDDD
ruclips.net/video/qY66DaUGtFs/видео.html