That is a thick boi... I like the Sabrent better from the pure look perspective, however the integrated fan is probably a huge benefit in the Orico... thanks for the review, food for thought.
At some point they had a 20gbit version with a better fan/heatsink design, although it needed a screw, and I used a ssd that tested very well for sustained writes in order to use it as a giant dump location for anything up to and including entire disk images. Maybe they'll do this with the new 40gbit capability sometime.
I have an ROG STRIX Z790-A Gaming Wi-Fi D4 motherboard - bought the UGREEN M.2 Enclosure & the Acasis 40gbps M.2 - could not break 1.25 GB/s write. I swapped cables, even bought the ASUS Thunderboltex 4 card, same speeds. Tried different drives, same 1.25 GB/s . Bangning my head against the wall.
Your mobo has 1 port in th e back that supports USB 3.3 2x2 (you have another of the same port but I'm not sure if you're using that with your case) , meaning it's top speed is 20 Gbps. So, you don't have USB 4.0. Another reason you probably only get 1.25GB/s is the SSD NVME you're using. what specific drive is it?
Acasis tbu 401 pro. It's a good bit larger and more a little more expensive . But has a top mounted fan and really good thermals. Probably one of the best thunderbolt 4 m.2 enclosure on the market.
just as an example, my desktop NEVER reaches past maybe 50c, even when gaming, but I ran a CHD compression utility and the CPU peaked at 100c, because it's basically stress testing the CPU at 100 constant across all the cores for hours at a time.
This makes sense with the prices dropping, but i can't imagine having a raid of ssd's for general users, so having a single 2TB SSD should be sufficient for most people, and if it's external, it can be easily hotswapped between systems.
Is this Thunderbolt 4 "compatible" or is this certified "Thunderbolt 4". The reason I ask is that everywhere I look it comes back "compatible" and USB4.
Correct me if I'm wrong but the specfiic Acsis model you test is limited to 10gb/s where as the Orico is 40gbps, should the Orico be test against something similar such as the Acsis TBU405 PRO
I didn't quite understand why the video shows 300Mbs transfer peed and ~80 Mbs speed a little later. Shouldn't it get close to atleast 1 G/g(bps) coz the benchmark shows ~3000 mbps ?
Using windows 11, do u guys do this Right-click the drive on which you want to turn disk write caching on or off, and then click Properties. Click the Policies tab. Click to select Better performance. Click to select Enable write caching on the device. Only by doing this i am able to get the write speed to bump up
Using windows 11, do u guys do this Right-click the drive on which you want to turn disk write caching on or off, and then click Properties. Click the Policies tab. Click to select Better performance. Click to select Enable write caching on the device. Only by enable this, my write speed is bump up from 500Mb/s to 2600MB/s
I don't like, it's pretty for sure, but you've got all that aluminum for potential thermal mass & then such a tiny heatsink; you could probably squeeze in a bigger one but still... the one that's also the hub is really really cool tho. Anyone who reads this, I wish you a nice day✌
Was very excited to purchase this enclosure. Those plastic lugs are ridiculous. I just broke both of them trying to fit them. Now I have to find something to hold in the card. Any idea?
I want you to look at the OWC express 1m2. It's usb4. It's absolutely gorgeous and heavy and is something you buy and sit back and go "yeeeeesssssssss" because it's so stupidly pretty. yes, it costs more. It's worth it.
K yeah I saw these for $99 but I didnt know how to judge if the speed was worth it over the $15 ones that are RTL9210 based. I like Orico, ive been buying a lot of their gear and they are solid.
Ciao grazie per la tua recensione. Pensi che questo Orico è compatibile con l'ssd Samsung pro 990 ma con la versione del suo dissipatore incorporato? Grazie
Aren't you trying to move to Japan? Isn't it really hard to move there though? Are you doing anything you could advise to others as advice on moving there?
Because the 9000 series is a complete joke and there are 5000 videos expressing that all over this site. The channel isn't about entertaining you, it's about him, at times, expressing his interest in various products that are "off the radar". Liked the tech community before "content creators" or strehmehrs attracted the normies.
1. You must be new here 2. It's a tech review channel and not Instagram or a beer pong party 3. Stop sharing your intrusive thoughts 4. RTIQ name checks out 5. Have a NICE day
I can't wait for the prices on these to go down to where the 3.2 enclosures prices are.
the official aliexpress store of orico is selling them for €64.36. is better than 100$.
@@Rayu25Demon oh snap Thanks dude I Will pick it up there. No minimum bulk?
That is a thick boi... I like the Sabrent better from the pure look perspective, however the integrated fan is probably a huge benefit in the Orico... thanks for the review, food for thought.
At some point they had a 20gbit version with a better fan/heatsink design, although it needed a screw, and I used a ssd that tested very well for sustained writes in order to use it as a giant dump location for anything up to and including entire disk images. Maybe they'll do this with the new 40gbit capability sometime.
I have an ROG STRIX Z790-A Gaming Wi-Fi D4 motherboard - bought the UGREEN M.2 Enclosure & the Acasis 40gbps M.2 - could not break 1.25 GB/s write. I swapped cables, even bought the ASUS Thunderboltex 4 card, same speeds. Tried different drives, same 1.25 GB/s . Bangning my head against the wall.
Your mobo has 1 port in th e back that supports USB 3.3 2x2 (you have another of the same port but I'm not sure if you're using that with your case) , meaning it's top speed is 20 Gbps. So, you don't have USB 4.0. Another reason you probably only get 1.25GB/s is the SSD NVME you're using. what specific drive is it?
Perfect for the base model MacMini M4
Si too noisy
Really hoping we see 12TB-16TB versions of the drives in 2025.👍
What was the other enclosure you were talking about? The one with the metal top that had a fan on top of the M.2.
Acasis tbu 401 pro. It's a good bit larger and more a little more expensive . But has a top mounted fan and really good thermals. Probably one of the best thunderbolt 4 m.2 enclosure on the market.
Top notch info. Good job
That's a cool little enclosure!
just as an example, my desktop NEVER reaches past maybe 50c, even when gaming, but I ran a CHD compression utility and the CPU peaked at 100c, because it's basically stress testing the CPU at 100 constant across all the cores for hours at a time.
This makes sense with the prices dropping, but i can't imagine having a raid of ssd's for general users, so having a single 2TB SSD should be sufficient for most people, and if it's external, it can be easily hotswapped between systems.
Is this Thunderbolt 4 "compatible" or is this certified "Thunderbolt 4".
The reason I ask is that everywhere I look it comes back "compatible" and USB4.
"I got go out of america"...; never your words made more sense than now....
Correct me if I'm wrong but the specfiic Acsis model you test is limited to 10gb/s where as the Orico is 40gbps,
should the Orico be test against something similar such as the Acsis TBU405 PRO
I wonder if you take off the lid if that will help with the heat
I didn't quite understand why the video shows 300Mbs transfer peed and ~80 Mbs speed a little later. Shouldn't it get close to atleast 1 G/g(bps) coz the benchmark shows ~3000 mbps ?
You have reached the 666K subscriber level. I took a screenshot.
Using windows 11, do u guys do this
Right-click the drive on which you want to turn disk write caching on or off, and then click Properties. Click the Policies tab. Click to select Better performance. Click to select Enable write caching on the device.
Only by doing this i am able to get the write speed to bump up
Thanks for sharing.
Two questions: what SSD did you use to get these numbers ?
Then, would this be suitable to edit 8K video ? or might tooo hot?
How about putting another more efficient heat sink instead, if it has a enough room for that?
That’s a cool Klingon mas you have on, the hair and forehead look real
Using windows 11, do u guys do this
Right-click the drive on which you want to turn disk write caching on or off, and then click Properties. Click the Policies tab. Click to select Better performance. Click to select Enable write caching on the device.
Only by enable this, my write speed is bump up from 500Mb/s to 2600MB/s
I don't like, it's pretty for sure, but you've got all that aluminum for potential thermal mass & then such a tiny heatsink; you could probably squeeze in a bigger one but still... the one that's also the hub is really really cool tho.
Anyone who reads this, I wish you a nice day✌
Was very excited to purchase this enclosure. Those plastic lugs are ridiculous. I just broke both of them trying to fit them. Now I have to find something to hold in the card. Any idea?
Can you link the larger enclosure
I want you to look at the OWC express 1m2. It's usb4. It's absolutely gorgeous and heavy and is something you buy and sit back and go "yeeeeesssssssss" because it's so stupidly pretty. yes, it costs more. It's worth it.
When Japan?
K yeah I saw these for $99 but I didnt know how to judge if the speed was worth it over the $15 ones that are RTL9210 based.
I like Orico, ive been buying a lot of their gear and they are solid.
They are $10 off plus 10% off right now, so that changes the price a bit.
Great Vid. Just checking, the link to Amazon for the enclosure says "Platform - Windows" I have a Mac Studio M2 ?????
Works OK on Apple
Can i use the sn850x with heatsync on it?
I bought one, and it gets really hot. The fan doesn’t help much, and it’s noisy all the time.
Ciao grazie per la tua recensione. Pensi che questo Orico è compatibile con l'ssd Samsung pro 990 ma con la versione del suo dissipatore incorporato? Grazie
Hi mister, this is the fastset taht can reach right ?
That Orioco multi head USB cable is not good unless you snip off the rubber. It doesn’t seat correctly on many devices like iPhones. Unfortunately
flip it around?
I want to get the Acasis, but reviews have said that the fan is always on, and it’s loud.
There is a ACASIS that have a switch to turn off the fan....is the 405PRO
its time you get a co host..
Aren't you trying to move to Japan? Isn't it really hard to move there though? Are you doing anything you could advise to others as advice on moving there?
Is it bad idea to run os of this? I sadly need windows and I'd rather disconnect drive then mess around with dual boot options
Perfect for EGPU.
My device only supports usb 3.2 gen 1 if I buy this will it give the maximum speed with my device if not how much can I expect
Will it fit a samsung 4tb 990 pro nvme m.2 ssd with pre-installed heatsink?
C'mon buddy.
how do you solve very low Q1T1 random write speed? I've got a similar enclosure (fully metallic model) and the same test results
It doesn't matter it's under 80 c the performance gets worse with more heat I would buy one that's has proper heat and should be under 60
Most of my Orico enclosures have failed. Cool while they work, but high failure rate (in my experience!)
Sir my laptop has type c 3.0 port with 10 gigabyte/ sec
Can I get this speed in orico enclosure and one nvme . ?
the banana 😆🤣🤣
Gotta get dat daily potassium and magnesium lel
666k subscribers is wild. Also first
Yo you have 666K 😈 Subscribers !!! Hail lord Zenu !!!
(Screams in modded Skyrim)
But can I run a Bitcoin node on it?
Congrats on 666k subs haha
just got one for my iphone not the one in the video.magsafe to of ali express
See-through plastic just cheapens and lessons the quality. There are no moving parts other than the small little fan so it’s irrelevant to function.
666k!!! 👹
@teksyndicate Congratulations to 666k Subs
banana 😂
Ifyou're gonna correct the way Aluminum is said in British English, learn that these are NOT hard drives. These are NVMe/SSD drives. carry on lol
…”these are NOT hard drives”…. Hmmm, I gave it a pretty hard rap on the bench, and it seemed VERY hard.
Why review the 9600x and 9700x when you can review some random knick knacks
I clicked exactly for that knicknack. Got tired of seeing the same content on every channel.
Because the 9000 series is a complete joke and there are 5000 videos expressing that all over this site. The channel isn't about entertaining you, it's about him, at times, expressing his interest in various products that are "off the radar".
Liked the tech community before "content creators" or strehmehrs attracted the normies.
Nice fingernail polish 40 year old bro. I'm sure your hard drive is clean.
1. You must be new here
2. It's a tech review channel and not Instagram or a beer pong party
3. Stop sharing your intrusive thoughts
4. RTIQ name checks out
5. Have a NICE day