I dont undertank when you orient the camera, I dont know what are you doing in that part 5:20 , can you explain it a little bit better? Cause I cant orient my camera.
@@facu_eze_peralta Click on transform pivot point at the top, then select cursor. After that make sure your camera is selected so whenever you rotate the x,y or z values. It orients the camera around the object for much better alignment. Your pretty much manually setting the orientation of your scene so 3d objects can track better when placed in the desred position.
@@facu_eze_peralta you need to make sure your face orientation is correct. go into edit mode press f3 type face and select face orientation if your cube is red select all faces and press (ALT N) to flip the normals ( it should turn blue ) making sure you have added the collision modifier to the cube the flag should not go through the cube.
The solve error is on the right just above the footage. Says 5.95 which is how many pixels the tracker is off by. You want to try and get this below 1 pixel for a decent track.
Not sure what I'm doing wrong, but when I upload the video and set the frames I get 343, not 143. The Solve Camera Motion also fails to execute. It says "Some data failed to reconstruct (see console for details)" Any idea what could be causing this?
Hello Jim for the video i shortened the clip purely because I thought the length of the clip was too long so it makes sense your getting 343 frames. with the solve camera motion it could be that you might have too many or too little tracking markers. (sometimes with blender you have to just try, change and retry again. ) pres b to bring up the elasso select tool and delete the markers not on the actual building making sure you don't go below 8 markers. Quick tip too help speed things up if you have a GPU, go to edit, preferences, then click the system tab, then under video sequencer increase the memory cache limit, this will help load the actual footage into your ram quicker for a smoother tracking experience in blender overall.
i made the same things you tell us to do but still getting more track points than the one you do in the video then affter using filter they became less than the one you have
Hello mate...go to the output tab, make sure your frame rate and range are correct. in the output twirl down set what folder you want your file exported to, choose a file format (open exr Is best codec dwaa lossy) then press CTRL, F12 or click render (to pleft) then render animation. if you wanna render in separate layers then create collection and enable hold out and indirect or just turn of what you don't want to render by clicking the camera button in the scene collection. hope this helps
I have been on this tutorial for 5 hours now and it is not helping me at all. A lot of things are left on 'Now we do this' how?? I am a beginner and I am struggling a lot. If you make something for beginners please give out the details too..
I understand where your coming from. In my next tutorial ill make sure its easier to follow for people who are just starting out in blender. I just didnt want to make it a 35min tutorial and make it boring for the viewers. Thanks for the constructive criticism.
Go to the output tab, make sure your frame rate and range are correct. in the output twirl down set what folder you want your file exported to, choose a file format (open exr Is best codec dwaa lossy) then press CTRL, F12 or click render (to pleft) then render animation. if you wanna render in separate layers then create collection and enable hold out and indirect or just turn of what you don't want to render by clicking the camera button in the scene collection. hope this helps
@@keyvisual9743 you might be in render mode with the transparancy turned on. If you switch over to solid mode the cube will be visible. You also want the cube to be a shadow catcher for the flag. So makes sense it isnt visible in render mode. Hope this helps
Thank you!
Good details !
what is the shortcut you pressed for camera orientation in 5.08?
Congrats! It´s so cool. Just a question. How is the name of plug-in did you say in 6:36 minute of the video
Thanks, The plugin is called Machin Tools : blendermarket.com/products/machin3tools
How do I get the subdivision mode to pop up on an iMac because every time I try to right click, it doesn’t work. Are there any other options
I dont undertank when you orient the camera, I dont know what are you doing in that part 5:20 , can you explain it a little bit better? Cause I cant orient my camera.
@@facu_eze_peralta Click on transform pivot point at the top, then select cursor. After that make sure your camera is selected so whenever you rotate the x,y or z values. It orients the camera around the object for much better alignment. Your pretty much manually setting the orientation of your scene so 3d objects can track better when placed in the desred position.
@@JermaineGrant Thank you for your answer! When I apply the collision the cloth sim goes trougth the cube, I dont know what I'm doing wrong.
@@facu_eze_peralta you need to make sure your face orientation is correct. go into edit mode press f3 type face and select face orientation if your cube is red select all faces and press (ALT N) to flip the normals ( it should turn blue ) making sure you have added the collision modifier to the cube the flag should not go through the cube.
Hi, When doing the cloth sim it rolls down fine,but my cloth is shorter than it initialy was as a plane.Any cleu ?
when i want to set de origin i see this problem "no object to apply orientation on"
any update with this problem?
hey there .. when i render to video my video scene background is black it just rendering plane and cube any help .it will help me alot
i did eveverything's as you said but at the end when my banner fully opens its like somethings hits it and pushes it back whyyyyy bro whyyy?
my object cube with the camera< how do i fix it?
where do i see the results of the solve? you say it in 2:28 but never show where it isl, i m confused
The solve error is on the right just above the footage. Says 5.95 which is how many pixels the tracker is off by. You want to try and get this below 1 pixel for a decent track.
@@JermaineGrant Thankyou thankyou, man. now i found it!
Ok, but when I render an animation it comes out with transparent background, how I can apply rendered animation into the video?
how long u render it?
its stuck on solve camera motion
please share editable file
Not sure what I'm doing wrong, but when I upload the video and set the frames I get 343, not 143.
The Solve Camera Motion also fails to execute. It says "Some data failed to reconstruct (see console for details)"
Any idea what could be causing this?
Hello Jim for the video i shortened the clip purely because I thought the length of the clip was too long so it makes sense your getting 343 frames. with the solve camera motion it could be that you might have too many or too little tracking markers. (sometimes with blender you have to just try, change and retry again. ) pres b to bring up the elasso select tool and delete the markers not on the actual building making sure you don't go below 8 markers. Quick tip too help speed things up if you have a GPU, go to edit, preferences, then click the system tab, then under video sequencer increase the memory cache limit, this will help load the actual footage into your ram quicker for a smoother tracking experience in blender overall.
i made the same things you tell us to do but still getting more track points than the one you do in the video then affter using filter they became less than the one you have
as long as you have enough tracking points on the building itself and your pixel error is below 1 pixel you should be good to get a clean track.
same problem i am facing :(
Iam pressing shifft+S i get snap 5:58 not to face !!
hey i am getting the same issue. Can tell how to resolve it?
@@bhupendersingh4412 SAME
Why's my solve error at 132:62 px bruh D:
when i play the video, the object moves, he doesnt stay in the place, how can i fix this?
Improve your tracking, watch carefully the 1st chapter of the video
what's are your version blender ?
the version i was using was 4.2.3 LTS
How to export the animation and the video?
Hello mate...go to the output tab, make sure your frame rate and range are correct. in the output twirl down set what folder you want your file exported to, choose a file format (open exr Is best codec dwaa lossy) then press CTRL, F12 or click render (to pleft) then render animation. if you wanna render in separate layers then create collection and enable hold out and indirect or just turn of what you don't want to render by clicking the camera button in the scene collection. hope this helps
have u done compositing in AE or u rendered in blender ?
@@VasanthR-k4t for this it was all blender, but i 100% reccomend you do compositing in either AE, Fusion or Nuke.
my solve camera stays on 0%
I have been on this tutorial for 5 hours now and it is not helping me at all. A lot of things are left on 'Now we do this' how?? I am a beginner and I am struggling a lot. If you make something for beginners please give out the details too..
I understand where your coming from. In my next tutorial ill make sure its easier to follow for people who are just starting out in blender. I just didnt want to make it a 35min tutorial and make it boring for the viewers. Thanks for the constructive criticism.
how should i render this?
Go to the output tab, make sure your frame rate and range are correct. in the output twirl down set what folder you want your file exported to, choose a file format (open exr Is best codec dwaa lossy) then press CTRL, F12 or click render (to pleft) then render animation. if you wanna render in separate layers then create collection and enable hold out and indirect or just turn of what you don't want to render by clicking the camera button in the scene collection. hope this helps
If we render like this will we get the background video also?
Why is the cube not visible?
@@keyvisual9743 you might be in render mode with the transparancy turned on. If you switch over to solid mode the cube will be visible. You also want the cube to be a shadow catcher for the flag. So makes sense it isnt visible in render mode. Hope this helps
@@JermaineGrant Thanks, I run the latest version on blender. But the shadow catcher is not there?