Stihl MS250 bad bog and fix…

Поделиться
HTML-код
  • Опубликовано: 28 апр 2021
  • If your chainsaw stumbles or bogs and will not run right. Adjusting the mixture screws doesn’t seem to fix it. Here is how to disgnose and fix it.
    *Here’s the Amazon link for the special tool you’ll need to adjust the carburetor. It’s a 12 piece kit that comes with a bunch of other tools to adjust and repair/clean the carbs on chainsaws/weed trimmers etc.
    www.amazon.ca/dp/B08QMDYXWB/r...
    This is a Stihl MS250 powersaw.
    Zama carburetor
    16” bar and chain
    Cutting wood in the bush.
    Alberta Canada.
    Chainsaw powersaw
  • Авто/МотоАвто/Мото

Комментарии • 16

  • @bruceludwick8200
    @bruceludwick8200 7 месяцев назад +1

    Just want to give a shout out to you. My MS250 which is about twenty years old was doing the same thing as yours, bogging down whenever you tried to give it throttle. I bought a new carburetor for it, installed it, and the problem was solved. Thank you very much for the help. I really appreciate it!

    • @Indeewoods
      @Indeewoods  7 месяцев назад

      @bruceludwick8200 right on did you buy the carb right from Stihl or aftermarket?

    • @bruceludwick8200
      @bruceludwick8200 7 месяцев назад

      I bought a Stihl carburetor from the stihl dealer.

    • @Indeewoods
      @Indeewoods  7 месяцев назад

      @bruceludwick8200 ok It should last a long time. Hey what fuel were using in it? Just regular or higher octane? Any ethanol in it?

    • @bruceludwick8200
      @bruceludwick8200 7 месяцев назад

      Used regular for years. Non-ethanol became available a few years ago and I always use it now.

    • @Indeewoods
      @Indeewoods  7 месяцев назад

      @bruceludwick8200 right on ya I’m pretty sure that 10% ethanol in the fuel was what took out my carb check valve.

  • @markyakubovsky3380
    @markyakubovsky3380 4 месяца назад +1

    Great video man.. Sounds like you got it set right- I can hear it 4 stroking at high rpm's then smoothing out into a 2 stroke in the cut. That's how I tune all of mine. Thx for the tips!!

    • @Indeewoods
      @Indeewoods  4 месяца назад

      @markyakubovsky3380 right on yep thats the way to tune them

  • @iangrant4466
    @iangrant4466 Год назад +1

    My name is Ian Grant I live in Jamaica first time watching your video I have the same problem with my ms250 was just want to clarify something with you I use Chinese Parts on my chainsaw carburetors on clutch drum not all Chinese parts are bad yes I'm very good Chinese parts I know farmertec make some good Chinese parts there are some Chinese parts totally drunk you just have to come here to get the right Quality Parts online because I buy carburetors from China clutch drum I get good service out of them when buying Chinese parts always check always check comparison on the views before buying

    • @Indeewoods
      @Indeewoods  7 месяцев назад

      @iangrant4466 yes some parts are good some are bad.

  • @luxbeci2
    @luxbeci2 Месяц назад +1

    What wrong? I have Stihl 880

  • @richardgrant746
    @richardgrant746 8 месяцев назад +1

    Replace spark arrestor

    • @Indeewoods
      @Indeewoods  8 месяцев назад

      @richardgrant746 that’s an older video I don’t even remember what it was about but I don’t think that saw even had a spark arrestor

  • @benrafter6078
    @benrafter6078 3 года назад +1

    Stihl pullin.. she'll go i hope

  • @iangrant4466
    @iangrant4466 Год назад

    And remember that stihlhave a chainsaw Factory in China part and chainsaws are manufactured right here in China buy Stihl chainsaw company