I shorted a t-con after misaligning ribbon cable to buffer board. Screen went strange blue, faded out, green and sticky lines on right side. Any idea which component got wrecked?
my home tv Samsung ua48h6400 problem is 6 time red blinking led but backlight seems ok(after opening back cover) and sound is also playing but no picture only on starting samsung logo flashes weakly. RUclips par bahut videos mein bola gaya hai its backlight or inverter problem. But today I checked tcon board it has also 3 blue led's but only 2(1 and 2) are glowing after starting the set but led 3 is off. supply 12 volt tcon ko fuse aur uske aas paas mil raha hai. This tcon has metal cover over circuit which cannot be opened. But havdd, hvin and coils near dc to dc ic are showing near zero voltages. 3.3v iam getting at coil as well test points and at both fcc cables. But no havdd or signals in panel. Is the tcon in protection mode? I checked with one or both fcc connected or disconnected with same result only 2 tcon blue leds glowing. Should I change tcon board or check the backlights also first by opening screen side? t con board number bn41-02110a.
Janab mera Led 42" On karne par sarif ak chamk deka kar blank hojata ha es ke bad tory der chalani ke bad our On Of krany ke bad tek hojata ha kia masla ha zara es ka hal bataye shukrya
Sir ji mere samsung ke tcon board me bas 12 volt wali hi led jal rahi aur left wala ribbon jab nikalta hu tabhi 3.3 volt wali led jalti hai jaise hi ribbon lagata hu phir 3.3 v wali led band ho jaati hai. Maine bypass karne ka bhi kosish kiya par nahi ho raha hai
Sir samsung ka ek set aaya hai modal hai LH55MEPLGCICL. Uska mother bord dusra lagaya dusra tv modal hai UA40D5000. Ka bord lagaya to suno me tv ok rahta hai lekin video input ya hdmi input lagata hu to no display me chala jata hai tv sir please help
My 40" Samsung led TV has ODD and EVEN signals like 0,1,2, clk, 3, 4 from motherboard . How to install vst56 universal board which has only upto +/- 3?. Can +/-4 be omitted and will TV work?
Protection nahi video hight karna tha iske liye adha adhura dikhaya 1 number pin per mayne laga kar dekha nahi hata protection aap clear sab dikhay but 1 number wala clear kio nahi dikhay
Many people writing you 4 questions and you Mr. Don't you really reply to anyone's.dont you care about follower. How you expect they give like, share and comment?😮. Take it as an advice. Important too. TRANSLATE IT TO ENGLISH, SO IT CAN BE SAW BY MANY PEOPLE AROUND THE WORLD. THEREFORE MANY LIKES AND VIEWS.
Good evening Munn sir ji bahut protection kaise todna sari voltage kaise ayega pura jankari milgaya very nice video tq 🙏🙏🙏👌👍🤝🤝🤝💐💐
I shorted a t-con after misaligning ribbon cable to buffer board. Screen went strange blue, faded out, green and sticky lines on right side. Any idea which component got wrecked?
my home tv Samsung ua48h6400 problem is 6 time red blinking led but backlight seems ok(after opening back cover) and sound is also playing but no picture only on starting samsung logo flashes weakly. RUclips par bahut videos mein bola gaya hai its backlight or inverter problem. But today I checked tcon board it has also 3 blue led's but only 2(1 and 2) are glowing after starting the set but led 3 is off. supply 12 volt tcon ko fuse aur uske aas paas mil raha hai. This tcon has metal cover over circuit which cannot be opened. But havdd, hvin and coils near dc to dc ic are showing near zero voltages. 3.3v iam getting at coil as well test points and at both fcc cables. But no havdd or signals in panel. Is the tcon in protection mode? I checked with one or both fcc connected or disconnected with same result only 2 tcon blue leds glowing. Should I change tcon board or check the backlights also first by opening screen side? t con board number bn41-02110a.
Sir aisa krne se penal work krega ya penal repair krna pdega set low white screen hai bilkul yehi volts nahi bn rehe
Bahi kya lcd ka panel tuhra tut jey tu kya same problem askati hy no dispalay
Good video ser bahut jankari mili
Isi pcb me trdy ok h fir bhi volt nhi bn rhe h to konsi ic kharab h
Sir protection pin no.1 can try any one side or only that side only sir plss reply me sir
Hello sirji..
Mera gharka sumsung TV ka t con bord work nahi kar raha he aap repesr karke de sakte ho kya.. mumbai me
Janab mera Led 42" On karne par sarif ak chamk deka kar blank hojata ha es ke bad tory der chalani ke bad our On Of krany ke bad tek hojata ha kia masla ha zara es ka hal bataye shukrya
Right side connection is clear but left side protection were to connect.....?
Do all t-con boards have led light indicator on them?
Not all of them, I believe there were some where the health light was on the motherboard, but its usually on the T-con board.
Sony led42ka tcon apke Pas melega? price please.
Wow very nice video/ demo TKQ v much
Hello where to jump the 3.3v to disable protection mode? Thanks.
Bahot Best sir clear solve Problem
Sir Samsung tv T650hvnno5.7ticonbooardme protection kese hatae?
Meter ka one needle kithar lagathe?
Sir ji mere samsung ke tcon board me bas 12 volt wali hi led jal rahi aur left wala ribbon jab nikalta hu tabhi 3.3 volt wali led jalti hai jaise hi ribbon lagata hu phir 3.3 v wali led band ho jaati hai. Maine bypass karne ka bhi kosish kiya par nahi ho raha hai
Then what is the symptom in the tv
Very nice video sir
Sirji SAMSUNG LCD tv me vertical lines a raha hai aur lcd screen side se dekhne pe white moti lines dikhta hai.Kya kar sakte hai....please advise.
thanks , same tv set UA32F5100, need to replace the T Con board as the screen is black, sound okay
Sir samsung ka ek set aaya hai modal hai LH55MEPLGCICL. Uska mother bord dusra lagaya dusra tv modal hai UA40D5000. Ka bord lagaya to suno me tv ok rahta hai lekin video input ya hdmi input lagata hu to no display me chala jata hai tv sir please help
Sir good, pr konsi IC aur wo konsi mtlab us pin ka nam kya hai sir bataeye.
My 40" Samsung led TV has ODD and EVEN signals like 0,1,2, clk, 3, 4 from motherboard . How to install vst56 universal board which has only upto +/- 3?. Can +/-4 be omitted and will TV work?
Muje lg lk311 tv thik karwana hai lcd le kar kaha aana hai sir
Is model Mein 3.3 volt Nahin a raha hai Jiska production bataiye aur ismein lining lining Dhire aadhe ghante bad Dhire Dhire pura lining ho jata hai
3.3 volt second led or 3rd nahi chalu huvi Kya problem hoga?
Trening center fack to nehi?
Very Nice information sir
sir reven ki pihle pin kon c ha Jis me tar lagai ha
Sir led sumsung me garin calor aha raha to kya kare
Sir 24v tikon bord me new 12v matherbord kaise lgaye ispe bhi bnao video
Good info but apne ak bar bhi vha close up nhi kiya jha 3.3 se protection point ka wire lagaya
good job sir
Lovely munna bhai
Dady yankee
Apto kamal he Sir. Bahut usefully videos Sir. Thanks
Sar yu using micro scope model and brand telmee please
Thanks a lot 🙏
Sir very good video thank you very much
Nice video sir...
Samsung ke Eesi model me
Half hor baar araha hai kya kare sir
please help kare
Hello Sir can you show where to jump 3.3v to disable protection mode?
Please explain what is different between made in India and china?
Sar ab kolkata kaha pay hoo
microscope kaun sa istemaal karte hai sir ji
Samsung ua32k5570au.t con protuction remove ?
Sir muje ak tcon tik korke doge plz ...mey Silchar Assam ka ho
Meri lcd ka modal Au43t6000ak hy no dispaly sound ok hy back light ok
Thankss broo keep it upp.... Ur vedio make us understand The main problem and solutions
Sar apka pas se terninig liya huwa larka bol raha he ki peisa leta he kuch vi accha nehi sikhata he bola
Ok,,,sir,,,,,but,,,how time,,,,work,,yur,,,,panal,,,,,,with out protaction,,,
Mera same model h.display nhi aa rha..
Sir ic sm4186 protection remove kaise hatayengey
How to remove protection of IC BD9486-f
second or third light nahi jalri. Kya karain?
nice video sir
Hi sir I aim from Kashmir I like your viodes
Sir ae model me dawal image arahhh
Im interested but not understand your language.
aap ka miicroscope ka model no kya hai aur iska price kitna hai.
very nice
I am from Bangladesh. How can I take training from you?
I need H 5100 t cone board
Jiska trdy likha nahin hai uska time par kya Karen
sir es model me red green ,white aye to kaise solve kare
और आपका रिपेयर सेंटर कहाँ है कोलकाता में
सर मुझे एक सोनी LCD मॉडल नो० KDL 32HX 750 है जो इन्वर्टर पर ऑन हो जाता है पर मेन सप्लाई पर नहीं होता , क्या प्रॉब्लम है
Rajak jee plasma TV panasonic THP42C10D red light 7 bar blink karta hai kya problem hai videos upload kare
Protection nahi video hight karna tha iske liye adha adhura dikhaya 1 number pin per mayne laga kar dekha nahi hata protection aap clear sab dikhay but 1 number wala clear kio nahi dikhay
Good sar
Good
nice
1207A1 ka protection pin kaise hatayengey
Wier sort karneka bad nahi horahe
Sir aap pin par conection to lagadia,,,,bar os pin ko find kese karo,,,bo to nehi bola,,,so aap adhura samjhaya
Best teqnic sar
Show protection pin sir
In TRDY_3
Sir filmware konsi site se download kre a42
Lqv.com
Lqv77.com
Delhi me traning center he kya
Ap kha training karata ha
many thanks, sir.
Led lcd programar kon sa lu
Thank you boss classical lesson
Sir microcop kitnay ka hai muze chahiya please repplay me
You didnt show where to connect the 3,3v to,.
In TRDY_3
@@ascatenaccio thank you sir..i will try to locate it then once i get the similar tv...bless you.
Hello bhai I have a Sony kdl48w650d 6times blinking code.backlight ok
Theks sar
Ye to naya khiladi v kar lega
Thanks for the sharing
👍🌹🤝🌹👌
Thanks the video sir
Kitna paisa lagta hai sir trning me
Many people writing you 4 questions and you Mr. Don't you really reply to anyone's.dont you care about follower. How you expect they give like, share and comment?😮. Take it as an advice. Important too. TRANSLATE IT TO ENGLISH, SO IT CAN BE SAW BY MANY PEOPLE AROUND THE WORLD. THEREFORE MANY LIKES AND VIEWS.
Aa bird or kabal chahiyei sar
Sir protection kaise hataye uspe video banaye plzzz
Thanks sir
Thanku bhaisaab
ok good
You are great sir