I'm 73 now but back when I was in 4th grade, we had a class trip to the Conn Band Instrument factory in Elkhart, Indiana. Quite interesting to see how the instruments were made. I've also played the Conn 650/651/652 theatre organs and the Conn-Kimball 653 organ.
Conn-Selmer saxophones have never really grabbed my attention like Yamaha, Yanagisawa or Selmer saxophones, but I did have a Conn-Selmer Avant DSS-200 straight soprano for over a year. I liked it but ended up selling it as I found it a bit hard to hold and play for long periods without feeling my right hand getting a little sore. I have played on every make of Legere saxophone and clarinet reeds over the past 5 and a half years and recently got two French Cut alto sax reeds. I compared them to my Signature, American Cut and Classic reeds. I played one on a Selmer Claude Delangle mouthpiece and one on a Meyer G 5M with my Yani AWO2. The French cut is darker than the American and Signature which I prefer as I sometimes found them a little bright sounding for me and want a darker tone. I found the Classic reed in the same strength as the French cut was more resistant. I have noticed that Legere reeds can sound a little thinner in the higher notes than cane reeds, but the French cut didn't sound as thin to me, and they mostly even tone throughout the range. So far I like these reeds and not just for classical playing.
You two are too funny. Seeing the guy 2 times a month is too much lol. Just purchased a conn-Selmer prelude as711 because of the name recognition and because it was on sale. Am new to sax’s. Very interesting video.
Never been to Derby but loved the visual. I bet they wish they had that kind of skiing. Btw it is crap here in San Diego so LA has to be worse. It might feel like home when you arrive.
As a repair tech, when I hear “Conn-Selmer” I think terrible finishing-sloppy key fitting, undeveloped tone holes, not enough shellac to float, terrible customer service. So this is a hard pass for me. I’ve heard other techs complain about quality control of the Supremes, but I have no first-hand experience. I will say that when I heard that they’ve decreased the size of the pad cups, I cringed. Pads won’t seal as long. Once they start to harden in the least bit, they’ll need to be replaced. Yamaha side keys are notorious for this. The seat of the tone hole is less than 2mm from the edge of the pad. Makes it harder to get a proper seal even on a new pad. I’d say most tenors have 3-5mm to the edge. What would you say the supremes have? Would suck if you have to rebuild your horn every 5 years or so. I have 22 years on my Reference 36 with only the typical closed pads replaced, save for when my strap came undone and I had to replace C, B, Bis and A after straightening the body. Thanks for posting all the great videos you do. Would be nice to hear more from a tech’s point of view. ;)
I have a Conn-Selmer 710 tenor and a 1962 Selmer Mark VI in mint conditions. I’m switching between the two. Except for that the Conn-Selmer is a little heavier, I can’t rather hear or feel any differences. No wonder. We are all playing on a Mark VI, a professional player told me. The Mark VI is the best saxophone ever made, so why not use that design. There must be a lot of communication between Selmer Paris and Conn-Selmer which is now changing name? What I’m sure about that there is no relationship between price and performance when comparing saxophones from 1000 USD and up.
That's a beautiful brushed gold Selmer tenor. I have one on order from SAX and it's due in to your location this month. That might be mine. Hope So. Name "Facts About Sax"
Let us know your channel name suggestions!
Saxology i think it is a good name
Sax Squared. I think it would be cool if you could do a 2 superscript though instead of writing out squared.
Sax Concepts
I love the behind the scenes aspect of this channel, so maybe something like "Behind the Sax"
I'm 73 now but back when I was in 4th grade, we had a class trip to the Conn Band Instrument factory in Elkhart, Indiana. Quite interesting to see how the instruments were made. I've also played the Conn 650/651/652 theatre organs and the Conn-Kimball 653 organ.
Conn-Selmer saxophones have never really grabbed my attention like Yamaha, Yanagisawa or Selmer saxophones, but I did have a Conn-Selmer Avant DSS-200 straight soprano for over a year. I liked it but ended up selling it as I found it a bit hard to hold and play for long periods without feeling my right hand getting a little sore.
I have played on every make of Legere saxophone and clarinet reeds over the past 5 and a half years and recently got two French Cut alto sax reeds. I compared them to my Signature, American Cut and Classic reeds. I played one on a Selmer Claude Delangle mouthpiece and one on a Meyer G 5M with my Yani AWO2. The French cut is darker than the American and Signature which I prefer as I sometimes found them a little bright sounding for me and want a darker tone.
I found the Classic reed in the same strength as the French cut was more resistant. I have noticed that Legere reeds can sound a little thinner in the higher notes than cane reeds, but the French cut didn't sound as thin to me, and they mostly even tone throughout the range. So far I like these reeds and not just for classical playing.
Great job on the video content guys, its always great to watch and listen to what you're delivering. Keep it up.. Dennis (over here in Spain)...
Good videos guys, can I ask would it be possible for you to include a vid on Jupiter 1100 series saxophones ??
Please make a video comparison of the Conn-Selmer Premiere and LeBlanc Baritones!
Leblanc again that’s a name from the 70’s
Sax in the City
You two are too funny. Seeing the guy 2 times a month is too much lol. Just purchased a conn-Selmer prelude as711 because of the name recognition and because it was on sale. Am new to sax’s. Very interesting video.
Mate, where'd you get it from? I saw one on Amazon and thought of buying it frm there
Never been to Derby but loved the visual. I bet they wish they had that kind of skiing. Btw it is crap here in San Diego so LA has to be worse. It might feel like home when you arrive.
As a repair tech, when I hear “Conn-Selmer” I think terrible finishing-sloppy key fitting, undeveloped tone holes, not enough shellac to float, terrible customer service. So this is a hard pass for me. I’ve heard other techs complain about quality control of the Supremes, but I have no first-hand experience. I will say that when I heard that they’ve decreased the size of the pad cups, I cringed. Pads won’t seal as long. Once they start to harden in the least bit, they’ll need to be replaced. Yamaha side keys are notorious for this. The seat of the tone hole is less than 2mm from the edge of the pad. Makes it harder to get a proper seal even on a new pad. I’d say most tenors have 3-5mm to the edge. What would you say the supremes have? Would suck if you have to rebuild your horn every 5 years or so. I have 22 years on my Reference 36 with only the typical closed pads replaced, save for when my strap came undone and I had to replace C, B, Bis and A after straightening the body.
Thanks for posting all the great videos you do. Would be nice to hear more from a tech’s point of view. ;)
Name suggestions
Those sax guys
Channel name should be SaxShopTalk
I'll see you there!
I have a Conn-Selmer 710 tenor and a 1962 Selmer Mark VI in mint conditions. I’m switching between the two. Except for that the Conn-Selmer is a little heavier, I can’t rather hear or feel any differences. No wonder. We are all playing on a Mark VI, a professional player told me. The Mark VI is the best saxophone ever made, so why not use that design. There must be a lot of communication between Selmer Paris and Conn-Selmer which is now changing name?
What I’m sure about that there is no relationship between price and performance when comparing saxophones from 1000 USD and up.
Not sure about the name but your shop looks like Sax Heaven.
Derby is more Midlands. Probably Londoners consider north as anywhere past Watford Gap;)
That's a beautiful brushed gold Selmer tenor. I have one on order from SAX and it's due in to your location this month. That might be mine. Hope So. Name "Facts About Sax"
The sax looked unreal, I'm sure you're going to be delighted with it! Thanks for your name idea!
@@SAXV2 Jules fixed me up with my ordered Brushed Gold Supreme a few weeks later. Nice work from a satisfied Customer to everyone at SAX!!!.
Relaxy-Saxy
Saxin’ around
Name suggestion: Behind the sax
Inside the sax
Saxcore
Brass and soul
You should name it George and his luscious locks of hair.
Name suggestion:
SaxAppeal (UK)
Thames Sax
Enjoying the videos guys, for the channel name, how about "Saxual Factual" ?
Saxing Around
Aren't we due a major announcement re: Signature Custom saxes?
Not as far as we know.. We’ll let you know if we hear any news!
Channel name: Two blokes, many horns
I think you should name it SAX V2...unless it is already used of course.......seems like I've seen it somewhere.
"Still Saxy" channel name🤣
Save the Sax
Name it “Saxology”
I think there’s a sexology RUclips channel already :)
Inner Circle Sax
Name -- Sax-Yutes
Channel name:
Saxy McSaxface
We knew this would come up 😆
@@SAXV2, it is simply what the fans want. ♥️
Name idea: Brass & Reed. Or Reed & Brass.
2 SAX V
Rough Sax
Sax2K
CASUAL SAX
Cosax
Two blokes and a bad note, name