Thanks for getting us in the show Stan. Out of all your videos I enjoy these types of the most. Your inquisitive attitude backed by your industry knowledge totally makes it. The Diamond C trailer ! Aww Man ! Anxiously waiting the rest of the series. Thanks again
Nice video. I have never had a reason to own a trailer but have always been interested in them. They are like classic cars with 2021 technology. Thanks for sharing.
Stan I never pulled a trailer in my life, but I pulled steel skids loaded with transformers and long hole drilling rig with 9 yard Sandvik scoop trams that bounced off the walls while traveling down spiral underground declines. It's cool to see all that's new in trailers that I never knew that existed, I will be watching it all, thanks!
Jacob from Diamond C is so calm and collected about his products. He isn't telling you to sell you, he's telling you to educated you, which will make you buy it. I really appreciate his techniques.
Through Tow Piglet and another guy out of California who documented the reason he went to Texas to buy a Diamond ♦️ C trailer was what sold me about the quality and lighter trailer vs the ole heavy design that cost ya weight and fuel .
Sam from V-Belt & Son's has 3-4 Diamond C trailers he's purchased in the past 2-1/2 years. Previously he used Texas Pride. After see Diamond C trailers, he's switched over.
Very cool stuff. When was this show? I hadn't heard anything about it, (not that I would have been invited) Anyway this should be super cool. Thanks as always, God bless.
I had bought two 40 ft diamond c engineered beam goosenecks for my hot shot business. They were incredible I ran oil field equipment in the mountains and hills and back roads of Ohio Pennsylvania and West Virginia. So they took an absolute beating I loaded them daily 15 to 20k and put 100,000 mi on each of them. Only problem I ever had was replacing the brakes and that's only because the drivers would never set the break gain right for the weight. And I had a bad spare tire bracket that broke off which they change the design after
@@Dirtmonkey I'm not exactly a trailer nerd haha, but I just love watching you videos. I've told my friends and family about you so they can subscribe and keep getting you bigger and bigger.
Very good points. There is a reason nobody builds a trailer with hardened steel for structural members. Sure, it would be strong and rigid. It just wouldn't handle a pothole very well. A ductile failure is far safer than a brittle failure in this scenario.
Hey Stanley, I'm about 60 miles north of Nashville; while you are in town visiting the trailer show, if you happen to run into a dealer that has an 8.5' x 16' enclosed with a set-back jack, please let me know via Utube.
Good evening! Day has been amazing but unplanned. Lots of things going on and none of them as scheduled haha. Isn't that the way it is though? Hows your day going? I'm drinking black coffee at 6;15pm so I must be tired- but it getting super cold and that kind of slows you down until you adjust to it.
9:50 automatic CLASS B AIR BRAKE and above endorsement drivers lics. required....just because it's an air system for the suspension which can affect your braking. how? cuz the tag axel lifts off the ground reducing a set of wheels with brakes. pretty messed up ain't it?!
He dared someone to tear it up I use diamond C trailers and we have tore up plenty of them but if he would like for us to demo that new dump trailer I can introduce him to the educationally challenged employees we hire that tear these trailers up on a regular basis 😂
If you put 75k miles a year on it, those weight saving add up. I would bet this trailer gets .5mpg better than a "standard" GN, empty. The fact you can carry more opens you up to loads and possibly a higher rate
I want a Diamond C trailer because of Stan's video of going to the plant and talking with Jacob. I don't have much if a need, but I still want to support them.
This Diamond C guy really knows his "sheet". Very well prepared for working the floor, what a resource Diamond C is extremly fortunate to have him representing their product lineup.
Diamond C has been killing it lately, especially among the content creators. I've seen a ton of content on youtube on Diamond C. But their products look awesome too though.
Diamond ♦️ C actually covers that by knowing that most businesses are gonna overload loads and with that said , if your into using a trailer ya don’t wanna always try to put materials that are to the max load . They spoke that folks don’t take the time to understand that those miles with overloaded trailers is what wears out your trailer faster . I myself have worked in the landscaping industry and we towed our trailers mostly with bumper pull and some with goosenecks but most companies would load rock , soil and the Bobcat all in the same trailer and go to a job site. Sure we’d have to drive slower but now I know that what the companies don’t care about is how long will ya be repairing and replacing your trailers cause ya overused em ? Well , that’s just my dos pfennigs. PROBST !
@@eddiereyna2998 I don’t know of anyone who owns a trailer who hasn’t at one time overloaded it, including me. Lol. That said some of the high strength steels require specific welding techniques, filler materials and or welding rods/filler material/wire. Add to that some of the higher strength steels may require pre/post heating to retain strength and prevent the introduction of stresses that could lead to weldment failures. As long as you know this, it’s not a problem. Lesser grades of steel tend to flex when subjected to sudden loads such as hitting a bump or pothole. The flexing is a means of dissipating the energy imparted by the bump/pothole. Higher strength steels don’t flex as much and would tend to impart the energy from the bump into the load. Diamond tenders this with the air ride suspension which tends to help dissipate the energy. Don’t know whether the air ride is an option or standard equipment on the featured trailer. Diamond is a great manufacturer who has an excellent engineering team and manufacturing team which, works tirelessly to provide a superior product. Just some thoughts of an old man. Love your response. Please don’t be offended by mine.
Can you ask Diamond C if they plan on upgrading the super weak charging capacity of that hydraulic dovetail trailer. You shouldn’t have to plug them in to maintain the battery if you use it almost every day, we run a 30’ goose
Well its not a "charging" circuit. It does not "push" electricity into the trailer battery. That circuit is ment to maintain a small break away battery and run interior lights and such. Not to keep a group 37 size battery or deep cycle battery charged. To be honest, if you use you your hydraulics with a low battery and plugged into the truck, that fuse is prolly blown. Those hyd unit can pull over 100 amps when under load. Your "charge" circuit is a 30 amp. Your best bet is to add a warn winch plug to your truck and trailer and run it that way.
Yeah forsure, i was thinking the same for a bumper hitch aluminum trailer. I would definitely bw interested to see how they engineer them if they started producing them.
Hi Stan, I'm guessing the Diamond C trailers are pretty pricey, but they have a lot of features and details that no other manufacturer has. They seem very well,engineered. Plus they also look really cool! I will definitely look twice at them before I ever purchase another trailer! Thanks for a whole video dedicated to them.
I am going to Kaufman Trailer’s they’re out of North Carolina the owner of Kaufman actually purchased hallmark trailers they make a boatload and they keep the price is as low as they can and quality is way up
@@steveanderson4768 I bought a Kauffman and really liked it and yes the factory allowed changes... I do not think their steel is the best but it served its purpose fine. Had to sell it when housing market crashed to keep up with my payments. I still have a Bri Mar dump that I use allot but again the steel? I know the paint is crap and rusts to beat hell.
"Put your wife in a trailer!" Stan, do not give me ideas like that 🤣 Very interesting video, cool to see so much innovation in trailers. Looking forward to seeing the other videos.
Why does none of these companies LINEX the underside and frames. Paint last maybe 3 years. High end trailers are expensive as hell and poor quality powder paint jobs
Tow trucks, busses, and trailer that have lower to load options, people it is called, "Kneel" a device to lower it. Funny Mr. Trailer doesn't know this...well informed. Customer; can I get that squatting/lowering thing you were talking about on RUclips...😅🤣😂
Good to see industry catching up to us fabricators! I built drive over fenders and extensions 5 years ago to haul mud trucks! Thanks for all the info!!
I have a one way only entrance / exit for the double J type hooks that I have been using for decades. It is funny as all he** watching people trying to unhook them. I also use receiver tubing for stake pockets for accessories and tooling attachment points.
Unfortunately, it doesn’t matter if your axle is on the ground to get charged a toll. It’s how many axles you have to use that gets charged. The reason they do this is because everyone would be raising their tag axles to get out of paying the tolls.
@Scott I guess it depends on what state your in. I heard some charge by the tire, down here in Florida on the toll roads you drive over pressure plates and get charged per axle. You have a five axle setup and lift one you will be charged only for four axles because that fifth axle isn't driving over the pressure plate.
So the show 8s for dealers only and Companies see why they dont make they quota. Open it up to consumers the dealers only sell consume wht u give them a deal on. We as customer wanna see these new things not find out when we stumble across them.
Was wondering why I was watching your trailer porn. Jacob knows his products, Diamond-C is my new favorite brand (where I didn't have one before), and I know a whole lot more about trailers now. Another great video.
Stan those trailers look well built the only thing I don’t like is the steel plate over another steel plate moisture in between will cause both plates to rust out. I have a dump bed on my truck that that’s what happened I would rather have wood bottom of bed but that’s what I prefer just think more durable.
I see your point but since I don't have a diamond Cdump trailer I can't speak from experience on that. I do know the bed on my sure trac trailer is warped and looks like a wave but everything else on that one is still rock solid.
Not a fan of the multiple sheet floor one gonna rust faster and 2 would be a pain in the ass to replace the floor or just go over it all again and create rust and weight again
I'm a reseller, I buy pallets by the dozens. Right now i have a modified junk trailer. I have been looking for Diamond's Max width package goose neck. That is 100% what I been looking for. Low profile for forklifts to load pallets and wide enough to get them side by side comfortably. Sometimes pallets are overburdened and need extra room. AND it's big enough I can drive the fork lift ONTO it if needed. I was worried I was going to have to try to make one myself, which may not have been a good idea. Diamond C, yall saved me. I have not pulled a gooseneck before but it's my intention to go to it.
Hey hey stan, i though i sent a comment to you but i guess it never sent, i hope you have a awesome night, and i had one heck of a leaf clean up today. But have a amazing night, god bless and go get em, your pal and friend , Alexander costa
Just wish they built my dump trailer with stake pockets that actually fit the 2 by 4 that should go into the pockets. Great designs poor quality control. Just a little control and the finish products would be amazing. Not to mention the first time I raised then lowered my dump (empty mind you), it pinched the wiring and blew fuses in my truck.
How is a gidget different than a gadget?? Is it just a tish different, or a schose??? (Skoshe??).....editors note, commentor is originally from N.Y. so English is not so gooder, as is spelling!!!!🤣🤣🤣🤣
Can someone confirm what Jacob said about some loads you can’t haul with traditional leaf springs? I’ve had my CDL for almost 10yrs now and I’ve never heard this before
I absolutely love the diamond c products. Was a little out of my price range recently bought a big tex 16 lx. If you get a chance stop by there both and see how you feel about the product they supply
Well I have a air ride hitch in my pickup for my 5th wheel , well worth the investment, look in the mirror and can see the trailer moving up and down ,and cant feel it in the truck Also had my 5th wheel RV switch over to electric over hydraulic disc brakes no way would I EVER get another trailer with out them. No discussion
i really like these trailers i first saw them at highway 55 trailer sales in buffalo, but they are also at that trailer place in ramsey you went to previously in a video in 2020? or 2019
NATDA - North American Trailer Dealers Association - Went to their show in Indianapolis. Good show for actual trailer dealers since it covers trailers and parts of all type from flatbed, utility, cargo, stock and horse trailers.
Love these types of videos. Can we get an update on you buying a mini x and front end loader? Those kubotas you really like and want! Also you going to replace those Ford gasers with brand new Godzilla trucks or buy some more RAMs or 1 of each?
Thanks for getting us in the show Stan. Out of all your videos I enjoy these types of the most. Your inquisitive attitude backed by your industry knowledge totally makes it. The Diamond C trailer !
Aww Man ! Anxiously waiting the rest of the series. Thanks again
I appreciate that
I learn 1 thing for sure every episode. This trailer lesson is unreal
Very cool👊. I try to learn something new when ever possible
I remember that trailer guy from before.. I like him. I like how he evenly explains everything out.
yeah- he's just very even keeled. and easy to talk with.
thank you very much from Moldova, very usefull videos about trailers and other info !!!
Happy to help! 😊
I used to distribute shocker hitches for a minute ….great products
Great idea
Really exciting post Stan. Lots of new innovations coming out.👋🇨🇦👍👍👍
Here for it 🤤
Well,like the song 🎵 says, Happy Trailers 😊 to you. Great stuff. Thanks 😊.
Rock on!😃
This was a good informative show Stan. Well done and thanks again
Glad you enjoyed it
Tons of outstanding Info, I always learn something new watching your vids.
Awesome, thank you!
Nice video. I have never had a reason to own a trailer but have always been interested in them. They are like classic cars with 2021 technology. Thanks for sharing.
Well said!
So many smart changes!
Singing a trailer song, while walking past a Taco Trailer. Nice.
Nice timing with this one Stan. I just happen to be looking for a new trailer that will haul my mower/tracvac combo.
Right on! Let me know if this helps/. I have a bunch of more trailer videos coming out in the next few weeks.
I love these videos! Thanks Stanley!!!
Awesome! Glad you like them!
Those trailers look so sick I would love to have them one day 👊
Diamond C makes very good equipment
That’s really true because you always need good reliable equipment on the site 💯
Great show love that big blue
Stan I never pulled a trailer in my life, but I pulled steel skids loaded with transformers and long hole drilling rig with 9 yard Sandvik scoop trams that bounced off the walls while traveling down spiral underground declines. It's cool to see all that's new in trailers that I never knew that existed, I will be watching it all, thanks!
You definately had some fun in those mines. I bet that was so cool.
Jacob from Diamond C is so calm and collected about his products. He isn't telling you to sell you, he's telling you to educated you, which will make you buy it. I really appreciate his techniques.
That is how to "sell"
Through Tow Piglet and another guy out of California who documented the reason he went to Texas to buy a Diamond ♦️ C trailer was what sold me about the quality and lighter trailer vs the ole heavy design that cost ya weight and fuel .
Hnjjjjnh. KödkldfkpjvkvcvokxkücxfvIoicxissjskdsccxyiycd0piXoka80sofds0kos0
Diamond C...Great Family, Great Company!
Sam from V-Belt & Son's has 3-4 Diamond C trailers he's purchased in the past 2-1/2 years. Previously he used Texas Pride. After see Diamond C trailers, he's switched over.
Wow I really like that Air Ride trailer
Good interview with Jacob at Diamond C.
Cheers 🇨🇦
The Cadillac of trailers freaking nice,
very well built
I live 4 miles away from were those shocker hitches are made in Arthur North Dakota
Dang that’s cool!
I LOVE Trailers!
Same- just something about them.
We just picked up a 12×6Tilt load trailer to haul our Tractor. Made by Canada Trailers.
you like it?
Great video
Cool stuff!
Very cool trailers!! Shew...I need a better trailer for my farm!
I need me a farm so I can buy me a cool trailer 👍
Looking for sponsor?
Cool stuff, thanks for sharing.
Very cool stuff. When was this show? I hadn't heard anything about it, (not that I would have been invited)
Anyway this should be super cool. Thanks as always, God bless.
I had bought two 40 ft diamond c engineered beam goosenecks for my hot shot business. They were incredible I ran oil field equipment in the mountains and hills and back roads of Ohio Pennsylvania and West Virginia. So they took an absolute beating I loaded them daily 15 to 20k and put 100,000 mi on each of them. Only problem I ever had was replacing the brakes and that's only because the drivers would never set the break gain right for the weight. And I had a bad spare tire bracket that broke off which they change the design after
Love the videos keep the amazing video up
Glad you like them Ian. Anything new happening this week?
No
Not first this time!!! Can't wait to watch
This is a good one if your into trailers. There are some sweet ones in this video.
@@Dirtmonkey I'm not exactly a trailer nerd haha, but I just love watching you videos. I've told my friends and family about you so they can subscribe and keep getting you bigger and bigger.
Thank you! Dude that is so cool. Much appreciated bud!
@@Dirtmonkey All good man. I’m just trying to get to 1k myself haha
Typically higher yield steel means lower elongation steel. You don't get something for nothing. HSLA has it uses but is not everything
Very good points. There is a reason nobody builds a trailer with hardened steel for structural members. Sure, it would be strong and rigid. It just wouldn't handle a pothole very well. A ductile failure is far safer than a brittle failure in this scenario.
Why are all of their tongue jacks mounted with the handle towards the rear? I've never seen that
Those were electric jacks
Hey Stanley, I'm about 60 miles north of Nashville; while you are in town visiting the trailer show, if you happen to run into a dealer that has an 8.5' x 16' enclosed with a set-back jack, please let me know via Utube.
There will be more trailers coming up on the channel. Maybe one will have what you want.
NATDA, North American Trailer Dealers Association.
Thank you.
Good Evening Stan. Hows is everything going? 7up today hby?
Good evening! Day has been amazing but unplanned. Lots of things going on and none of them as scheduled haha. Isn't that the way it is though? Hows your day going? I'm drinking black coffee at 6;15pm so I must be tired- but it getting super cold and that kind of slows you down until you adjust to it.
@@Dirtmonkey Yup that's how it goes. Day is going good. Cold is here and snow almost here.
Stan 👍👊
9:50 automatic CLASS B AIR BRAKE and above endorsement drivers lics. required....just because it's an air system for the suspension which can affect your braking. how? cuz the tag axel lifts off the ground reducing a set of wheels with brakes. pretty messed up ain't it?!
Great video bro 👍
Thank you Treyvon- so whats new with you? How are things on your end?
He dared someone to tear it up I use diamond C trailers and we have tore up plenty of them but if he would like for us to demo that new dump trailer I can introduce him to the educationally challenged employees we hire that tear these trailers up on a regular basis 😂
Where’s this at
It was in Nashville
Is the width between the fenders any larger than standard?
Is grade 100 necessary at all? The cost wouldn’t be worth the weight savings.
I think so. Im not sue why they would use it otherwise
If you put 75k miles a year on it, those weight saving add up. I would bet this trailer gets .5mpg better than a "standard" GN, empty. The fact you can carry more opens you up to loads and possibly a higher rate
That dude knows his stuff! What a competent company rep. Best one you’ve had in a long time. Never stuttered and knew his product! Kudos, Jacob!
Jacob owns the company with his family. He grew up at the manufacturing plant. His dad started the company. Its pretty much all he has ever done
😎
I want a Diamond C trailer because of Stan's video of going to the plant and talking with Jacob. I don't have much if a need, but I still want to support them.
@@Dirtmonkey You get great info from him to share with us and shot down in Vegas by the fool with his trailers..
Old ideas, even the air operation was the same concept but in hydrolic. Sad....
This Diamond C guy really knows his "sheet". Very well prepared for working the floor, what a resource Diamond C is extremly fortunate to have him representing their product lineup.
4:16 I’m thinking STAN wants this, and will happily help out with testing and feedback; hint hint🙏🏼
yep- you are correct!😂👍
Diamond C has been killing it lately, especially among the content creators. I've seen a ton of content on youtube on Diamond C. But their products look awesome too though.
Ya got that right 👊
My only problem with diamond c is good lord the price for one
Harder steel is a good thing UNTIL it has been overstressed, damaged or you want to weld something to it. Then, all bets are off.
Diamond ♦️ C actually covers that by knowing that most businesses are gonna overload loads and with that said , if your into using a trailer ya don’t wanna always try to put materials that are to the max load .
They spoke that folks don’t take the time to understand that those miles with overloaded trailers is what wears out your trailer faster .
I myself have worked in the landscaping industry and we towed our trailers mostly with bumper pull and some with goosenecks but most companies would load rock , soil and the Bobcat all in the same trailer and go to a job site.
Sure we’d have to drive slower but now I know that what the companies don’t care about is how long will ya be repairing and replacing your trailers cause ya overused em ?
Well , that’s just my dos pfennigs.
PROBST !
@@eddiereyna2998 I don’t know of anyone who owns a trailer who hasn’t at one time overloaded it, including me. Lol. That said some of the high strength steels require specific welding techniques, filler materials and or welding rods/filler material/wire. Add to that some of the higher strength steels may require pre/post heating to retain strength and prevent the introduction of stresses that could lead to weldment failures. As long as you know this, it’s not a problem.
Lesser grades of steel tend to flex when subjected to sudden loads such as hitting a bump or pothole. The flexing is a means of dissipating the energy imparted by the bump/pothole. Higher strength steels don’t flex as much and would tend to impart the energy from the bump into the load. Diamond tenders this with the air ride suspension which tends to help dissipate the energy. Don’t know whether the air ride is an option or standard equipment on the featured trailer. Diamond is a great manufacturer who has an excellent engineering team and manufacturing team which, works tirelessly to provide a superior product. Just some thoughts of an old man. Love your response. Please don’t be offended by mine.
Can you ask Diamond C if they plan on upgrading the super weak charging capacity of that hydraulic dovetail trailer. You shouldn’t have to plug them in to maintain the battery if you use it almost every day, we run a 30’ goose
Well its not a "charging" circuit. It does not "push" electricity into the trailer battery. That circuit is ment to maintain a small break away battery and run interior lights and such. Not to keep a group 37 size battery or deep cycle battery charged. To be honest, if you use you your hydraulics with a low battery and plugged into the truck, that fuse is prolly blown. Those hyd unit can pull over 100 amps when under load. Your "charge" circuit is a 30 amp. Your best bet is to add a warn winch plug to your truck and trailer and run it that way.
I wish that Diamond C would make , engineered aluminum gooseneck trailers and bumper pull .
I’d pay fer that .
Yeah forsure, i was thinking the same for a bumper hitch aluminum trailer. I would definitely bw interested to see how they engineer them if they started producing them.
Hopefully someday in the future ❤️ 🇺🇲
Hi Stan,
I'm guessing the Diamond C trailers are pretty pricey, but they have a lot of features and details that no other manufacturer has.
They seem very well,engineered.
Plus they also look really cool!
I will definitely look twice at them before I ever purchase another trailer!
Thanks for a whole video dedicated to them.
I am going to Kaufman Trailer’s they’re out of North Carolina the owner of Kaufman actually purchased hallmark trailers they make a boatload and they keep the price is as low as they can and quality is way up
@@steveanderson4768 I bought a Kauffman and really liked it and yes the factory allowed changes... I do not think their steel is the best but it served its purpose fine. Had to sell it when housing market crashed to keep up with my payments. I still have a Bri Mar dump that I use allot but again the steel? I know the paint is crap and rusts to beat hell.
@@steveanderson4768 Kaufman is a kinda cheap made trailer I'd have went diamond c gator or maxxd
"Put your wife in a trailer!" Stan, do not give me ideas like that 🤣 Very interesting video, cool to see so much innovation in trailers. Looking forward to seeing the other videos.
😂 More to come!
Speaking from my experience divorce lawyers are expensive!
where stanley is from we call 'em ice castle fish houses ;)
Shocker hitches are awesome... I was reluctant to get one because of the cost but so glad I did, wish I had done it earlier.
I don't blame ya. if you haven't seen it tested its hard to spend money on it.
Why does none of these companies LINEX the underside and frames. Paint last maybe 3 years. High end trailers are expensive as hell and poor quality powder paint jobs
Tow trucks, busses, and trailer that have lower to load options, people it is called, "Kneel" a device to lower it. Funny Mr. Trailer doesn't know this...well informed.
Customer; can I get that squatting/lowering thing you were talking about on RUclips...😅🤣😂
7:26 seen that today in monticello and enclosed car hauler trailer in big black lettering 8.5' x20' load capacity 4,000#'s
Good to see industry catching up to us fabricators! I built drive over fenders and extensions 5 years ago to haul mud trucks! Thanks for all the info!!
Same here
I have a one way only entrance / exit for the double J type hooks that I have been using for decades. It is funny as all he** watching people trying to unhook them. I also use receiver tubing for stake pockets for accessories and tooling attachment points.
Unfortunately, it doesn’t matter if your axle is on the ground to get charged a toll. It’s how many axles you have to use that gets charged. The reason they do this is because everyone would be raising their tag axles to get out of paying the tolls.
@Scott I guess it depends on what state your in. I heard some charge by the tire, down here in Florida on the toll roads you drive over pressure plates and get charged per axle. You have a five axle setup and lift one you will be charged only for four axles because that fifth axle isn't driving over the pressure plate.
So the show 8s for dealers only and Companies see why they dont make they quota. Open it up to consumers the dealers only sell consume wht u give them a deal on. We as customer wanna see these new things not find out when we stumble across them.
Was wondering why I was watching your trailer porn.
Jacob knows his products, Diamond-C is my new favorite brand (where I didn't have one before), and I know a whole lot more about trailers now.
Another great video.
Very cool!👊
I wish I was there hanging out with you checking out trailers. Sounds amazing!!! You lucky man. 😃
That was a pretty fun event!
Need door's on Both sides of the trailer, safety issue so workers don't get run over by cars and can get front pallets off from each side.
sounds like you have thought about it this for awhile.
THIS is 1 of the reasons I love your channel! Love the trade show walk thru. Looking forward to the rest of the show!
Very cool! Glad for the feedback.
Stan those trailers look well built the only thing I don’t like is the steel plate over another steel plate moisture in between will cause both plates to rust out. I have a dump bed on my truck that that’s what happened I would rather have wood bottom of bed but that’s what I prefer just think more durable.
I see your point but since I don't have a diamond Cdump trailer I can't speak from experience on that. I do know the bed on my sure trac trailer is warped and looks like a wave but everything else on that one is still rock solid.
Not a fan of the multiple sheet floor one gonna rust faster and 2 would be a pain in the ass to replace the floor or just go over it all again and create rust and weight again
Diamond plate is not no slip in the winter with snow on a track machine we used to always weld grouser bar to the metal
I'm a reseller, I buy pallets by the dozens. Right now i have a modified junk trailer. I have been looking for Diamond's Max width package goose neck. That is 100% what I been looking for. Low profile for forklifts to load pallets and wide enough to get them side by side comfortably. Sometimes pallets are overburdened and need extra room. AND it's big enough I can drive the fork lift ONTO it if needed. I was worried I was going to have to try to make one myself, which may not have been a good idea. Diamond C, yall saved me. I have not pulled a gooseneck before but it's my intention to go to it.
if i get blessed by he man above id love to have a Diamond C. i want to start a HOTSHOT company. American dream to work for yourself and Handle it
Thats a growing Industry. Good time to jump in.
Hey hey stan, i though i sent a comment to you but i guess it never sent, i hope you have a awesome night, and i had one heck of a leaf clean up today. But have a amazing night, god bless and go get em, your pal and friend , Alexander costa
You sound tired Alexander. Have a good night and get some rest.
Could it be north american trailer dealers association just a guess
You teased some loading ramps in the intro, but never saw them in detail. What’s the deal with those?
They are in the second video
Stan! I'm Jasmine~ Please check your Email. And I really like your channel❤❤
Thanks Jasmine & will do
Thank you for the video
Diamond C is cool
Man that is one serious dump trailer, wow.
Im having trailer envy
Great video, I love videos like this that show new equipment.
Me too!
that air system needs to be a passenger side for safety if your using it as an air compressor
Wow! Jacob passing on all this knowledge and introduction and implementation of new technology into these trailers is amazing!
Just wish they built my dump trailer with stake pockets that actually fit the 2 by 4 that should go into the pockets. Great designs poor quality control. Just a little control and the finish products would be amazing. Not to mention the first time I raised then lowered my dump (empty mind you), it pinched the wiring and blew fuses in my truck.
How is a gidget different than a gadget?? Is it just a tish different, or a schose??? (Skoshe??).....editors note, commentor is originally from N.Y. so English is not so gooder, as is spelling!!!!🤣🤣🤣🤣
I think its a tich different but thats just me since I don't know what a skoshe is😃👊
@@Dirtmonkey all i know is my Maine Grandmother said that is more than a drizzle, less than a bunch!!!
Steel doesn't have a molecular structure...
North American Trailer Dealers Association
Diamond C has there stuff together. Their videos are pretty good too. Cool video Stan, looking forward to the rest of trailer week
You betcha & thanks man 👍
Can someone confirm what Jacob said about some loads you can’t haul with traditional leaf springs? I’ve had my CDL for almost 10yrs now and I’ve never heard this before
🤔 so Diamond C uses HY-100?
Might be time to upgrade my big tex trailers
I absolutely love the diamond c products. Was a little out of my price range recently bought a big tex 16 lx. If you get a chance stop by there both and see how you feel about the product they supply
I have info on big tex maybe I can work it in a video
That "Shocker" hitch is similar to several RV airbag hitches. They WORK !
WOW, those are some nice trailers! It's a shame this isn't open to the public. Thanks for sharing Stan!
More to come👊
Dinosaur Colorado USA saying hello and thank you for sharing
Hello there! Thanks for coming in tonight👊
Grinding till truck two next spring!!
Thanks for the help and content that helps businesses grow.
Thanks for the feedback. I have some cool stuff coming up in a future GIE video.
Well I have a air ride hitch in my pickup for my 5th wheel , well worth the investment, look in the mirror and can see the trailer moving up and down ,and cant feel it in the truck
Also had my 5th wheel RV switch over to electric over hydraulic disc brakes no way would I EVER get another trailer with out them. No discussion
Loadtrail already has that gravity tilt trailer
i really like these trailers i first saw them at highway 55 trailer sales in buffalo, but they are also at that trailer place in ramsey you went to previously in a video in 2020? or 2019
How does a trailer with 2 16k lb axels rated for 40k lbs ?
Pretty sure the tongue is taking some weight in addition to the axles.
Why do I horde trailers I never use and want to buy more???
Because thats what a guy does. Nuff said
NATDA - North American Trailer Dealers Association - Went to their show in Indianapolis. Good show for actual trailer dealers since it covers trailers and parts of all type from flatbed, utility, cargo, stock and horse trailers.
Love these types of videos. Can we get an update on you buying a mini x and front end loader? Those kubotas you really like and want! Also you going to replace those Ford gasers with brand new Godzilla trucks or buy some more RAMs or 1 of each?
Dang- you need to be my next content producer. I could never keep up! Thats all good stuff
Diamond c is one of the best no doubt