I'm looking to eventually figure out an injection system on my Chrysler LA-360 1977 engine. Have two of those engines in two vehicles and one is not going to be on the road but everything works on it so for testing the system, it will be great. Thanks for this video
very interesting project, i've been looking into doing something like that for my jeep. Did you take pulse width into consideration? If you could had the ability to adjust the pulse width on the fly (serial communication for example), you'd have an awesome start to making a tunable diy ecu. keep it up, excellent work.
can i know the diagram, im planning to use arduino for my project bike. it's an carburetor bike and single piston that i want to convert to Fuel injected using this arduino.
I also tried and test same project with arduino 4 relay module and injector and coil spark at once as firing order for 4 cylender vehicle. But how i attached with vehicle timing. Like camshaft or with piston movement
This can be done. What is the cc size? What hp are you planning on achieving ? Once you have that you and calculate the injector size. Also you will need a tps yo controll the amount of fuel going to the engine
@@ivanshaw7643 hey i think the harderst part to all of this is to decode the crankshaft wheel and trigger the injection at your specific degrees before tdc.im trying to make it work on my 200cc bike with a 12-1 wheel but i cant make it work at hight speeds it loses sync so i dont know if my method is correct.have you solved this part ?
If were including the injectors and throttle body 300 but that's with distant injectors board materials 30 is a good number I had around 50 into it but that was years ago
@@ivanshaw7643 Any updates or references? I'm looking at modifying a 18HP L-Head B&S opposing twin and one of the mods I'd like is to implement EFI. Planning on also polishing the heads on the 15.5HP L-Head I have, to use on for increase performance. I'm still early on learning about the engines in more detail... at the moment with the OHV's.
I mustn't get onto a different Shaw in Australia !!!! I haven't worked for almost 6 years as if I'm a dumbass & they thought I was supposed to do his work (labouring). I'm an electrician who can't get work & I got pulled over by the police for driving an unregistered car yesterday, hopefully I can get it registered soon but geez,they must think that I'm a dumbass if I have to do that (break the law) !!!! I need another home to do that sort of arduino work in because I live with my parents after losing my $200,000 AUD house & their household was never like that !!!! I need to find out I've heard that a local company wants to place me whose more of an electromechanical person into a laboratory where I don't feel like that sort of chemistry was my strong point. Meaning,usually that sort of person whose a round is selected by a woman whose way out to me (square profile),I was never for an " IST" type as one of them I dated didn't feel any sort of chemistry. Meaning, that a person such as me is never going to work on trains ever again & they thought that's as intelligent as I ever was,based on my high school results & grades (average).
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I'm looking to eventually figure out an injection system on my Chrysler LA-360 1977 engine. Have two of those engines in two vehicles and one is not going to be on the road but everything works on it so for testing the system, it will be great. Thanks for this video
Very good! I'm building a similar setup but I don't know how long the transistor can work without a heatsink.
Have you ever tried to run common rail piezo injector with arduino?
I'm actually working on one now also have a 47rh controller for both 4th and lock up all in one unit
very interesting project, i've been looking into doing something like that for my jeep. Did you take pulse width into consideration? If you could had the ability to adjust the pulse width on the fly (serial communication for example), you'd have an awesome start to making a tunable diy ecu.
keep it up, excellent work.
can i know the diagram, im planning to use arduino for my project bike. it's an carburetor bike and single piston that i want to convert to Fuel injected using this arduino.
I also tried and test same project with arduino 4 relay module and injector and coil spark at once as firing order for 4 cylender vehicle. But how i attached with vehicle timing. Like camshaft or with piston movement
How much resistance have the resistences that you put in?
would any fuel injector be enough and compatib
le with arduino uno board?
what kind of mosfet did you use?
hi ya would you be able to advice me am duing simple one injector engine.what circuit did you use ? do you have control over duty cycle?
Lately I am working on a similar project. Can you shared your codes, please?
Hello bro i need make ecu taster. In wich
make a video with the engine running
I put a video of it on the sandrail I have a couple of it running just have to dig them up
hi, did you share the code anywhere ? cheers brett
What’s parts did you use on the bread board
ruclips.net/video/Y4ocmRIQLqY/видео.html this video shows what was used also has the items used in the description with a basic wiring diagram
What's it going into?
what firmware you instaled..??
and what software you use for injection setting..??
I used c++
good kollo
hello,
how can we contact you?
could you please tha code
i want to make an indirect fuel injection system for my 2stroke motorcycle
This can be done. What is the cc size? What hp are you planning on achieving ? Once you have that you and calculate the injector size. Also you will need a tps yo controll the amount of fuel going to the engine
@@ivanshaw7643 hey i think the harderst part to all of this is to decode the crankshaft wheel and trigger the injection at your specific degrees before tdc.im trying to make it work on my 200cc bike with a 12-1 wheel but i cant make it work at hight speeds it loses sync so i dont know if my method is correct.have you solved this part ?
@@tougeattack123 maybe your polling rate is too low to catch up with the crank
bruh i just need a diagram for this on a single cyclinder motor hmmm
plz schema and code arduino
nice
ruclips.net/video/Y4ocmRIQLqY/видео.html this video shows what was used also has the items used in the description with a basic wiring diagram
can you upload a diagram of this pls?
diegoxtrike i found it thx
+diegoxtrike
please give me the diagram :)
Where to get the diagram?
how much to build me one
If were including the injectors and throttle body 300 but that's with distant injectors board materials 30 is a good number I had around 50 into it but that was years ago
man you need to help me here i need to run single fuel injector with arduino bow did you program arduino?
Sorry man been off for a while I'll update a list of the parts and complaints used and a source code for this system
@@ivanshaw7643 Any updates or references? I'm looking at modifying a 18HP L-Head B&S opposing twin and one of the mods I'd like is to implement EFI. Planning on also polishing the heads on the 15.5HP L-Head I have, to use on for increase performance. I'm still early on learning about the engines in more detail... at the moment with the OHV's.
Can I get your diagram
Upload code please
Codigo
I mustn't get onto a different Shaw in Australia !!!!
I haven't worked for almost 6 years as if I'm a dumbass & they thought I was supposed to do his work (labouring).
I'm an electrician who can't get work & I got pulled over by the police for driving an unregistered car yesterday, hopefully I can get it registered soon but geez,they must think that I'm a dumbass if I have to do that (break the law) !!!!
I need another home to do that sort of arduino work in because I live with my parents after losing my $200,000 AUD house & their household was never like that !!!!
I need to find out I've heard that a local company wants to place me whose more of an electromechanical person into a laboratory where I don't feel like that sort of chemistry was my strong point.
Meaning,usually that sort of person whose a round is selected by a woman whose way out to me (square profile),I was never for an " IST" type as one of them I dated didn't feel any sort of chemistry.
Meaning, that a person such as me is never going to work on trains ever again & they thought that's as intelligent as I ever was,based on my high school results & grades (average).
The big challenge is connecting an programming other sensors
Limit switches triggering a digital time increment placed in arduino serial monitor
7nkmkkkiiio