Hi, I followed the steps and managed to clear some codes and the car started, I cut the power to this device. Now I'm wondering if this malfunction will happen again that the car does not want to start? Did you have the same problems later?
Hello Great video. My problem is a bit different a message came up saying please take load off steering and the car would not start. but the steering did not lock like it normally does. Instead when I put in key I hear the noise like it wants to unlock but twice. This was happening with the mmi screen coming on and the date signal on the dash coming on. After seeing on an Audi forum a post to turn steering wheel 180 degrees with foot on the brakes and try to start. Did this but to no avail. Unfortunatly now the mmi not coming on and no date signal on dash but still noise like it is trying to unlock but twice. any advise?
i keep getting message on dash ''ignition lock defective'' , will it cure if cut the wire, as sometimes car is ''dead'' when insert key and cant start until try more and more times...
@@carsolutions1164 at the moment all works, but sometimes i get this ''ignition defective'' im curious will it fix if i unlock steering wheel, and cut the wire . or that error is somehow to do with ignition not lock mechanism?
Hello, so I did everything accordingly and the car still won’t pull the codes, some modules it is able to reach and others it can’t reach. Could the steering lock actuator have failed? I know it can get stuck and clearing codes can fix it and unlock it but since I’m not able to pull the codes then I’m guessing it failed and I need to replace it. Any help would be great thanks
Thanks man this helped me a lot the same problem happened to me, from iraq with love and respect
Hi, I followed the steps and managed to clear some codes and the car started, I cut the power to this device.
Now I'm wondering if this malfunction will happen again that the car does not want to start?
Did you have the same problems later?
Hi, if you cut the red/black wire you ok. You will never have that issue ever.
Hello Great video. My problem is a bit different a message came up saying please take load off steering and the car would not start. but the steering did not lock like it normally does. Instead when I put in key I hear the noise like it wants to unlock but twice. This was happening with the mmi screen coming on and the date signal on the dash coming on. After seeing on an Audi forum a post to turn steering wheel 180 degrees with foot on the brakes and try to start. Did this but to no avail. Unfortunatly now the mmi not coming on and no date signal on dash but still noise like it is trying to unlock but twice. any advise?
Fix steering lock first mate. He is the main problem.
Hi was your steering wheel locked? Having issue with A3 2009 , steering wheel turns but key won’t turn to start car. Thank you
Yes, it was
My 07 a6 crack but don’t start ???
hello i tried clearing the errors with delphi 2017 but i didn't find the error…where can i get the vcds?? please help me
Ebay or search on google.
i keep getting message on dash ''ignition lock defective'' , will it cure if cut the wire, as sometimes car is ''dead'' when insert key and cant start until try more and more times...
Dont cut wires is car is dead. It needs to be vut when you get ignition on. Only solution is take out steering lock now.
@@carsolutions1164 at the moment all works, but sometimes i get this ''ignition defective'' im curious will it fix if i unlock steering wheel, and cut the wire . or that error is somehow to do with ignition not lock mechanism?
@@2_S1MPLE when ignition is on then cut the wire and all will be ok.
@@carsolutions1164 should i need delete all faults before? Does the ignition defect is fixed when cut the steering wheel lock wire? Thanks
@@carsolutions1164 need delete history vag codes first and then do it with unlocked steering wheel? will it fixed the ''dead'' symptom?
Hello, so I did everything accordingly and the car still won’t pull the codes, some modules it is able to reach and others it can’t reach. Could the steering lock actuator have failed? I know it can get stuck and clearing codes can fix it and unlock it but since I’m not able to pull the codes then I’m guessing it failed and I need to replace it. Any help would be great thanks
Could be faulty lock.
Flash the high beam 3 times and you can reed the foult and reset it !
Hi please I need help I hawe same problem I put in obd reader but nor read
Put lights on, step on the breaks and switch high beams. And try to read faults now.
@@carsolutions1164 I try it still not come on
Manually power 7th fuse on the driver side with +12v and then try to read and reset codes.
@@surena9451Ezt hogy? 12v...
A biztosíték jó vagy szakadt..
Thank you!
Thanks
I hate these cars I can’t get home