How to bungee launch large RC sailplane, review of details

Поделиться
HTML-код
  • Опубликовано: 28 ноя 2020
  • I have compiled in this video what I believe is important to have a successful launch. This method is proven, safe and avoid any stress on the boom of the sailplane. Big bonus as the release mechanism is ahead of the hook, there is no risk for the line to wrap arround the tail of the sailplane.
    If you have any question, request, email me at steffruelle@att.net
  • КиноКино

Комментарии • 24

  • @wayne8469
    @wayne8469 Год назад +1

    Took a while but finally getting it all together. In Thailand and not to many tow planes available. The only way to get my bigger gliders into the air. Thanks for the video

  • @martinj9251
    @martinj9251 9 месяцев назад +1

    Good job you thought of the Bag that would have never crossed my Mind!

  • @johnw5734
    @johnw5734 3 года назад +2

    Thanks, Stephane. This video will save me alot of time tuning the set up.

  • @joelossen7944
    @joelossen7944 3 года назад +2

    les powell and myself are anxious to give them a try.. thank you for both building one for each of us but also for the time to perfect the bungee launch for large powered gliders it is much preferred over the rolling dolly when on grass only areas........dolly works fine on ashfault but too risky on grass............see you soon for pick up mid december

  • @JimKingsnorth
    @JimKingsnorth 3 года назад +2

    Very cool! Enjoying the pictures you have been posting on Facebook of your outings. Hope you are doing well friend.

  • @johnw5734
    @johnw5734 3 года назад +3

    Okay I've pretty much completed mine. It all fits inside a bucket. I deviated on the release stake making it from a 38mm wide flat steel. My theory is it won't rotate and will hold the correct angle for the quick release. Thanks again for working out all these measurements, Stephane.

  • @johnw5154
    @johnw5154 2 года назад +5

    Thank you for the video. It was great to watch. As someone interested in getting into scale gliders. I learnt a lot. Where can the quick release be picked up from?

    • @georgipartsalev6193
      @georgipartsalev6193 2 года назад +1

      Look for a snap shackle. They are available at marine shops and are used for spinnaker sails.

    • @scottmichael3745
      @scottmichael3745 Год назад

      I used an "L" hook at the bottom of the aircraft and a key ring loop at the end of the bungy. Came off every time it reached the apex. Works like a charm. No release needed.

  • @rennpart
    @rennpart 2 месяца назад

    Did you add the motor on that Salto or is that a kit?

  • @marksmith-nx8kg
    @marksmith-nx8kg Год назад +2

    It has a motor! Why not just throw it?

  • @joewoodchuck3824
    @joewoodchuck3824 Год назад

    How does one buy the right numerical tension weight when the hobby shops sell tubing by small, medium, and large?

  • @bluedog9601
    @bluedog9601 3 месяца назад +1

    How are you making the hook on the aircraft mate.

    • @StephaneRuelle
      @StephaneRuelle  2 месяца назад

      some simple 1.5mm music wire bent in shape as z bend

  • @saurabhmotewar2316
    @saurabhmotewar2316 9 месяцев назад +1

    Hey stephane may i know whats that release hook called?

  • @mosquitok833
    @mosquitok833 Год назад

    “I’m not talking just to make the wind blow around “.

  • @wearemany73
    @wearemany73 2 года назад +2

    I'm not sure I get it, why not spin up the prop and throw it? 🤷‍♂️ That's what I do..

  • @gardentools2553
    @gardentools2553 3 года назад

    That's pretty complicated for the typical power flower to get the hang of ...especially using a reprobate brain ..

  • @johnstockburn6396
    @johnstockburn6396 Год назад

    This is too painful to watch ,..the audio is terrible

  • @spamhead
    @spamhead 3 месяца назад

    Whenever I use a bungee, I go for as steep a start as possible without looping, a bit like flying a kite. I don’t use a quick release or measure the stretch distance, just hope I don’t break anything or pull the wings off!