CMDR_MUYA from reddit here! Welcome to the i100 Pro club! Nice and clean build! Didn't know you would be upgrading so soon! If you really want three fans at the bottom, you could see if the noctua slim 120mm fans could fit?
Hey bro, unfortunately any 15mm slim fans would not fit. The only hope is a 12mm slim fan but it's quite difficult to find a pwm fan with this specific thickness.
i hear there's two ways to build, sandwich or traditional. How about mixing the two, could you leave the mobo at the back so there's more space for a cpu heatsink, low profile noctua or whatever, and the vertical gpu mount on the side with a riser cable. 3x intake on the bottom 3x exhaust at the top. what d'you think? go easy on me, i'm new to this.
I do have a video of that sandwich layout. Check it out on my channel. I have the exact setup that you are referring to except that I am still using a 360 aio. Don't worry bro, you all good 😊 ruclips.net/video/a44yF7M07Uo/видео.html
I think im gonna buy this case. Locks so good. One Last question: I am planing to use a NZXT Kraken x63 Aio which is exactly 55mm in height..so a little bit thicker (3 mm) but smaler then yours. Do you think the thickness is a problem? Is there enough room between the top-fans and the inner case construction?
I have a tuf 3070ti 52mm thickness, since your card is 60mm and you couldn't put the 15mm fans, theres no way to put one of these 25mm noctua fans (NF-A12x25) with my gpu right? There's a sale going on in Japan and I cant get the windowed version for less than $100... I'm debating between the nr200 but not sure if it's worth to give up the NF-A12x25 :I
Yours might actually fit a 15mm fans under your card but definitely not a 25mm thick fans. I'd say go for this case. I owned both this and the NR200P but I think this gives a vibe of being classy/unique case.
How much of clearance do you have after installing your 60mm thickness GPU? The official clearance number for this case is 62mm and I was thinking to get one of those 4070ti which can have 65mm thickness. I almost bought this case at the store, it looked premium compared to any of small cases.
Nice. I want to build a mini ITX too with my spare Aorus RTX 3080 Master. Your Aorus 3070 is 60mm thick, while my 3080 is 70mm thick. Do you think mine will fit in the Jonsbo?
I'm a bit confused in the reviews they have 2 slot GPU brackets yet yours has 3 on both brackets. I assumed that yours was a newer sample maybe after review feedback. Unfortunately, I received mine today and it only has 2 slots on each bracket, a bit strange.
Hi Matthew, yes mine is from the new batch hence why it has 3 slots. Yours could probably from the old batch (old stock) if you ordered it from a reseller. I got mine from a group buy, ordered directly from the Jonsbo manufacturer in Taiwan.
Tough question, but I guess I will choose this one because of the following: - it can fit a 360 AIO - has better airflow - better paint finish. - I like it's tinted glass.
Is the rear fan set as exhaust or intake? Have you done any comparisons with/without? Currently don't have a fan on mine back there, wondering if it's worth adding.
@@SoundFisher It doesn't have 3 slots in the back panel though. It can fit a 3-slot size card, but it can't actually support anything with 3 physical slots without modding the case.
@@jonsanmiguel5045 uhhh... You sure? Because I can see it in my own video at 04:02 that it has 3 slots for horizontal orientation and the same for vertical orientation at 04:47. Maybe you've seen Optimum Tech's review before which only has 2 slot that's why you're saying that? But that was a prototype/sample if I'm not mistaken.
@@jonsanmiguel5045 yours must be from the first batch which was before OT's review came out. I have a friend here who has the same case in silver and his case also has 3 slots like mine. So it really must be after OT's review that the manufacturer changed the design to 3 slot.
@@SoundFisher i have 5800x, rog crosshair viii dark hero, strix 3070ti, ryujin ii 360, in a phanteks p600s. is it worth it if i downsize my pc by reusing everything except changing the motherboard to a x570-i rog strix and building it in the i100 pro? i’m not desperate in saving space but i think smaller case looks much better and obviously space saving. what do you reckon?
@@mihsgaming5088 temps are not so far from my previous case since this case exhausts hot air immediately because it's an itx case that has efficient room for the air to exit.
your videos are actualy underrated fr! keep up the amazing work!
That really means a lot to me. Thank you 😊
Nice video 👍🖖
CMDR_MUYA from reddit here! Welcome to the i100 Pro club! Nice and clean build! Didn't know you would be upgrading so soon! If you really want three fans at the bottom, you could see if the noctua slim 120mm fans could fit?
Hey bro, unfortunately any 15mm slim fans would not fit. The only hope is a 12mm slim fan but it's quite difficult to find a pwm fan with this specific thickness.
@@SoundFisher the scythe Kaze flex slims are 12mm and pwm, 300 to 1800 rpm, really solid fans
i hear there's two ways to build, sandwich or traditional. How about mixing the two, could you leave the mobo at the back so there's more space for a cpu heatsink, low profile noctua or whatever, and the vertical gpu mount on the side with a riser cable. 3x intake on the bottom 3x exhaust at the top. what d'you think? go easy on me, i'm new to this.
I do have a video of that sandwich layout. Check it out on my channel. I have the exact setup that you are referring to except that I am still using a 360 aio. Don't worry bro, you all good 😊
ruclips.net/video/a44yF7M07Uo/видео.html
Nice Build and video! @4:48 you can see a Triple Slot Braket? All the other reviews say that its only a Dual-Slot? Is this a new revision?
Yes this is a revision that's why it has triple slot bracket.
I think im gonna buy this case. Locks so good. One Last question: I am planing to use a NZXT Kraken x63 Aio which is exactly 55mm in height..so a little bit thicker (3 mm) but smaler then yours. Do you think the thickness is a problem? Is there enough room between the top-fans and the inner case construction?
There's enough space, so don't worry about it. 🙂
I have a tuf 3070ti 52mm thickness, since your card is 60mm and you couldn't put the 15mm fans, theres no way to put one of these 25mm noctua fans (NF-A12x25) with my gpu right?
There's a sale going on in Japan and I cant get the windowed version for less than $100... I'm debating between the nr200 but not sure if it's worth to give up the NF-A12x25 :I
Yours might actually fit a 15mm fans under your card but definitely not a 25mm thick fans. I'd say go for this case. I owned both this and the NR200P but I think this gives a vibe of being classy/unique case.
@@SoundFisher thank you!
Any idea if a Aorus GeForce RTX 3070 TI Master 8G would fit in this case?
It might fit but without any extra slim fans under the gpu.
hi Soundfisher! if my card is 55mm in thickness( 2.5 slot) . do you think i can still fit 15mm fans at the bottom?
Possibly yes.
@@SoundFisher thanks for the reply! great build btw. i only received the 2 slot back panel :v
How much of clearance do you have after installing your 60mm thickness GPU? The official clearance number for this case is 62mm and I was thinking to get one of those 4070ti which can have 65mm thickness.
I almost bought this case at the store, it looked premium compared to any of small cases.
Sorry for the very late reply. Not much of a clearance so I believe a 4070ti will not have leave any space for any slim fans under it.
Nice. I want to build a mini ITX too with my spare Aorus RTX 3080 Master.
Your Aorus 3070 is 60mm thick, while my 3080 is 70mm thick. Do you think mine will fit in the Jonsbo?
It will fit for sure but there won't be any space left for a 12mm fans underneath it.
I'm a bit confused in the reviews they have 2 slot GPU brackets yet yours has 3 on both brackets. I assumed that yours was a newer sample maybe after review feedback. Unfortunately, I received mine today and it only has 2 slots on each bracket, a bit strange.
Hi Matthew, yes mine is from the new batch hence why it has 3 slots. Yours could probably from the old batch (old stock) if you ordered it from a reseller. I got mine from a group buy, ordered directly from the Jonsbo manufacturer in Taiwan.
Nice work, great video too..at first I thought it was an NR200..lol
Thank you, I do have a video of a NR200P build 😊
@@SoundFisher Yeah..I watched that one too :)
Very nice build, it’s nice to see all the process. Which one do you prefer, this or the NR200
Tough question, but I guess I will choose this one because of the following:
- it can fit a 360 AIO
- has better airflow
- better paint finish.
- I like it's tinted glass.
Is the rear fan set as exhaust or intake? Have you done any comparisons with/without? Currently don't have a fan on mine back there, wondering if it's worth adding.
I set it as intake since there's a dust filter included. It's 2-3C cooler on my build. Not much improvement but still better than none. 😊
what are the temps in this layout at full load?
Hi, as far as I remember. In a ambient room temperature of 25C, CPU around 75-80C and GPU around 65-70C. Both at full load. Mid-High Graphics in COD.
How many millimeters there is between gpu and the case floor?
About 13-15mm. Atleast on my specific GPU which is a 3070 from Aorus/Gigabyte
Nice video. Is it possible to mount a 3 slot GPU horizontal? For example 3090FE....couldn´t see it in the video.
Thank you. As far as I know it can support a 3 slot GPU on both horizontal and vertical GPU layout for an FE. Not sure for aftermarket GPU's tho.
@@SoundFisher It doesn't have 3 slots in the back panel though. It can fit a 3-slot size card, but it can't actually support anything with 3 physical slots without modding the case.
@@jonsanmiguel5045 uhhh... You sure? Because I can see it in my own video at 04:02 that it has 3 slots for horizontal orientation and the same for vertical orientation at 04:47. Maybe you've seen Optimum Tech's review before which only has 2 slot that's why you're saying that? But that was a prototype/sample if I'm not mistaken.
@@SoundFisher oh what. I have this case and only have two slots. I have the silver one though if that makes a difference.
@@jonsanmiguel5045 yours must be from the first batch which was before OT's review came out. I have a friend here who has the same case in silver and his case also has 3 slots like mine. So it really must be after OT's review that the manufacturer changed the design to 3 slot.
did the case ship with the 3 slot gpu bracket because it show in the website 2 slot only.
It's 3 slot on mine tho.
@@SoundFisher That’s a good news I think they change it because optimum tech complained about it’s only 2 slot bracket .
@@cops9499 most probably you're right. I discovered this case because of him 😅
hey. one question. can you actually mount a 120mm fan at the rear (inside) of the case?
Unfortunately no.
@@SoundFisher i have 5800x, rog crosshair viii dark hero, strix 3070ti, ryujin ii 360, in a phanteks p600s. is it worth it if i downsize my pc by reusing everything except changing the motherboard to a x570-i rog strix and building it in the i100 pro? i’m not desperate in saving space but i think smaller case looks much better and obviously space saving. what do you reckon?
@@mihsgaming5088 it is well worth it, I came from a Phanteks 719 case.
@@SoundFisher how worse is the temp if any?
@@mihsgaming5088 temps are not so far from my previous case since this case exhausts hot air immediately because it's an itx case that has efficient room for the air to exit.
How can I order this case?
Through Jonsbo's website or their official resellers
@@SoundFisher I went on the website and there wasn't a way to order. The case also isn't sold on Amazon or Newegg.
@@bark9356 you might need to contact them directly through one of this
www.jonsplus.com/about/contactus.html
@@SoundFisher Okay, appreciate it bro
Case price?
Bought it for $1200 HKD. Around $150 in USD.
Where can I get this case
From Jonsbo in Taiwan. You can order it online in their website.