Thank you! I bought a 2002 X5 and only 1 of the Key Fobs worked. After some Internet research I was about to order a new battery and replace it. One of the battery reviewers on Amazon stated that after cutting his Fob apart and testing the battery it was actually good and had a full charge, turned out he just needed to pair it to the car again so I thought I'd give it a try. After watching your video and 1 other I gave it a try and it worked. Then my other key didn't work so I paired it and it worked but the first key didn't, turns out you have to pair them both again at the same, consecutively, after turning the ignition to the first On position. Glad I didn't go through the whole battery replacement process unnecessarily.
Of all the videos i watched,your is the only one to work. Others said to lock doors,cycle 5 times,turn key till lights come on, nothing. But yours worked great first time.
Blessings Nathan thank you for the walk through. The hold + 3 clicks worked for me! Not sure if the video mentioned but the doors need to all be closed, the windows up and all the door already unlocked for the hold + 3 clicks to work.
Thank you I lost my husband not to long ago he has 05 BMW 530i I never drove it because it tricky on starting it until I saw your channel so thank you now can do one on how to put head lights on automatic
Great information tip on programming my new cut key with remote, all along it was a blown fuse in the trunk, i tried all the programming method and nothing worked, until i changed the fused 😊
Thanks Nathan. I did an X3 front axle a couple of days ago. In my front driveway. It’s already cold here. Anyways, the inner elbow bearings were complete off the assembly. Boot torn up. Just silently waiting to jam up. Anyway, a shop wanted 900$. I have it but I have other bills too. Got a good one from same place all the shops here get it. Threw it in myself. Had to rent tools.. less than 150$ out of pocket. I wanted to record it too. There isn’t a good one on here. Anyways. Thanks. These how to are great to have. Good job.
Man, I use your methods for everything on my 02 e39 5si. I really appreciate your help. I’ve done so much to it, it’s crazy! I’m down the interior and steaming rack. Driving it again! Had it since 15 too. I’ll never get rid of it.
WOW! WHO KNEW IT WAS JUST A RE PROGRAM ISSUE! at first thought it was the battery was watching videos of replacing it but heard risky on that SPECIALLY IF REPLACING WITH A NON RECHARGEABLE BATTERY so was gonna just get me another one thank God I was able to watch this video it saved me some money !!
My locks work with old key. Car’s electrics cut on.... but won’t do anything when you turn to start the motor..... nothing. Could it still be the key... or would it be the ews module... or the ring antenna?
Watched your video and that didn't work but I have x3 07 so I actually went and turned to Acc and pressed the unlock and 3 times lock on the key fob and it cycled the locks . Still that you for everything that to share
bmw e39 2002 i lost all in the plastic of key i have only metal ,when i turn it right no contact what to do ? can i buy from other car heart of key and move it in my and do this like you ?
Hello Nathan. Thanks I'll try this.01 X5. My original key battery is dead. I was able to turn the key right on the door and the entire car would lock and turn left and all doors would unlock. I'd hear a beeping sound as well I guess to let me know if the security system was disabled or not. That suddenly stopped working. Any ideas where to start?
thank you so much my friend you save my life i tried so many ways but didn’t work when i did it the way you said it works right away thank you for the tip bro god bless you
I bought a 03 BMW X5 about a month ago. The key worked fine for remote lock and unlike, until today. The key works fine using the key lock on the drivers door. But I cannot use the remote. I followed the instruction on your RUclips post. It just does not work for the remote. I only have the one key. Any ideas on getting the remote to work? Thanks for any information you can provide.
ANy idea why my 2002 bmw x5 keeps needing me to program my key fob? It will start the car but wont wireless open or lock doors. Untill I perform the relearn.
Hi. I got a new key from my local BMW shop. It programmed it to open and lock the vehicle but it's not staring the car. Can you help with how to code the key ???
Hey Nathan, I have the issue that you described with those e46 ebay keys,. So mine should be an original one, but all of the sudden I can unlock, lock the car, use all the electrical stuff such as radio, head and tail lights, and fog lights as well, but the car would start whenever it wants. eventually it always starts, but it can take up to 20 tries. Sometimes, when I press down on the unlock button and hold for at least 5 secs, it starts. What would you and the other guys in the comments suggest?
Hi Nathan, you helped me a couple times before, I got to ask your advise again, my '98 540i with the small screen display in the car shows that BC code function shows 0000 and car will not start, do you know how to get the code? is it part of VIN or ...? I would really appreciate your say :)
I have a 2000 323ci and it just stop working out of nowhere, bought new key,but having trouble. Basic trouble is key not starting car but all light on. Is there anything u can helpw me qith
tnx you again Nathan you save me once more time hehe, btw my other key seems to work randomly sometimes it locks and don't unlock or other wise or non at all lol I try to reprogram it but I couldn't, maybe the battery is dying ? any idea whit that other key?
Does this car have Bluetooth? For music can someone help I bought a 2005 x5 3.0i and I see the telephone button is there anyway to connect todays smartphones to play music?
Nathan, I've tried all of these steps and still no work. Is it true that there is a rechargeable battery inside or am still missing something. the pin actuator is missing from the fuel door. Could that be the issue. Doors lock and unlock with the key in the door.
Hey Nathan, great video. I had 2003 535 and it used to roll down and roll up windows and sunroof with key fob unlock and lock buttons. I recently got 2006 X5 and it rolls down windows and sunroof with key fob unlock button but it does not roll them back when I press the lock button. Any ideas what could be the reason or how to activate this feature. Thanks
If ur door doesn't chime when you have the key in ignition with door open you need new key. Chip got demagnetized. Happened to me. Don't waste your $ on other checking other stuff check key first. Was expensive ( $273.89) but I rather pay for something that actually works and not say, "oh well, at least I have a new starter..
i got the key box to program the keys to star the car but only 2 keys would start the car !! i test the keys with the box they are all good because all the information of car comes up vin number and stuff !! how can program all 4 keys to star the car ??
Hello Sir. Thanks for the BMW video you post. They Help me out a lot, but I was wondering if you could help me with a issue Im having. I have a 2004 BMW X5 E53 4.4l. It’s making a ringing noise. The cause of the problem is a H10 gong. It just won’t stop ringing. Do you how to fix this. There’s really nothing on RUclips explaining or showing us how to fix the problem. If you could do so I’d appreciate that. Thank you for your time Sir. V/r Jason
Hi I have tried all possibilities but everyone is talking about 3 button key(unlock key, BMW logo(lock key), trunk key). but my problem is when I bought my BMW 2000 318i, I got key with only two buttons lock and unlock but still I tried the reprogramming procedure few times still struggling with the key fob. I have already replace the battery as well. My key fob works sometimes but most of the times it doesn't work any help please.
Question I had my original key on an X5 e53 which stopped working completely I purchased a new one from my local dealer and they programmed my fob (lock/unlock) function I purchased a couple more off eBay after market I tried to program a total of 3 keys but for some reason it only lets me program a total of 2 I'm assuming that it's because it must have a total of 4 keys programmed to it meaning the 2 original keys that the vehicle came with the vehicle when new (only got one when I purchased the vehicle) Which is the one that stopped working the new one I bought from the dealer direct that would be the 3rd key and 1 of the 2 that I purchased from eBay. To make it a total of 4 keys programmed keys to the vehicle but 1 of the keys that came with the truck when new I didn't get and the other that i did get when I bought the car doesn't work which only leaves me with 2 working keys (original purchased from dealer) and 1 of the 2 that I bought from eBay my question is how do I delete the 2 keys the one that's not working and the one that I didn't get when I purchased the vehicle? Any advice?
1999 BMW 328i Key will start the car but not remotely lock or unlock doors. I replaced the battery in the key and have tried multiple times the programming method in you video. The key flashes after programing but door locks do nothing. Any other ideas?
new to the bmw scene and I just bought a 98 E38. The key opens the trunk and that's it, whats wrong? Also I can lock all the doors with the key and the alarm chips but when I use the button in the ceter of the car it doesn't work, help
Hi Nathan At last someone has explained an extra programming process, ie the OBD and ring device. Can you tell me what the correct description of that device is called please? Cheers Chris
hey i bought 2 keys for 2005 bmw x5..both keys i program thru your video and they have been cut already,but im missing a step or something!!..once i wanna start the truck with those keys,truck wont start..any ideas? thanks!
Hey guys, i really need help with my car :( Model : E66 750Li Error Code: 2F44 EWS Manipulation Prevention car does not want to start Is it a problem with the key? any solution?
Programming Additional BMW Key Fobs So if you have a working key fob, but wish to program additional keys, follow these steps: Take the working key fob along with the ones you want to program inside the car with all doors and windows closed. Put the working key into the ignition and turn to position 1. At this point, the dash lights and accessories should turn on. Turn the key back and remove. On the working key, hold down the unlock button and press the lock button (the BMW logo) 3 times, then release the unlock button. The doors will then automatically lock and unlock. Take the new key and hold down the unlock button while pressing the BMW logo 3 times, then release the unlock button. Again the doors should lock and unlock, and you’re done. Programming a New Key from Scratch These instructions are for programming a new key when you do not have a working key fob. Insert the key into the ignition and turn it to position 1 and back rapidly 5 times. Remove the key Hold the unlock button and press the BMW logo 3 times, then release the unlock button. If you have additional keys you’d like to program at this time, repeat step 3 within 30 seconds from the original key programming. Turn on the ignition to complete the process.
Thank you! I bought a 2002 X5 and only 1 of the Key Fobs worked. After some Internet research I was about to order a new battery and replace it. One of the battery reviewers on Amazon stated that after cutting his Fob apart and testing the battery it was actually good and had a full charge, turned out he just needed to pair it to the car again so I thought I'd give it a try. After watching your video and 1 other I gave it a try and it worked. Then my other key didn't work so I paired it and it worked but the first key didn't, turns out you have to pair them both again at the same, consecutively, after turning the ignition to the first On position. Glad I didn't go through the whole battery replacement process unnecessarily.
I'm going to try this thanks for the info sir!
Of all the videos i watched,your is the only one to work. Others said to lock doors,cycle 5 times,turn key till lights come on, nothing. But yours worked great first time.
Blessings Nathan thank you for the walk through. The hold + 3 clicks worked for me!
Not sure if the video mentioned but the doors need to all be closed, the windows up and all the door already unlocked for the hold + 3 clicks to work.
Thank you I lost my husband not to long ago he has 05 BMW 530i I never drove it because it tricky on starting it until I saw your channel so thank you now can do one on how to put head lights on automatic
Great information tip on programming my new cut key with remote, all along it was a blown fuse in the trunk, i tried all the programming method and nothing worked, until i changed the fused 😊
Which fuse was it (which slot position and color)? Did you order the fuse on Amazon and if so, what is the part number?
I ordered my key straight from bmw, done what you said and mine actually cranks the car as well. Thanks
Your a diamond I tried all the other videos none of the procedures worked, first time your way fixed it thanks
Following Nathan video on my 2003 540i when things not workings
You have saved my time and money, because my X5 passenger door, sometimes open, sometimes doesn't, now followed your video and reset, it's perfect 👌
Thanks Nathan. I did an X3 front axle a couple of days ago. In my front driveway. It’s already cold here.
Anyways, the inner elbow bearings were complete off the assembly. Boot torn up. Just silently waiting to jam up.
Anyway, a shop wanted 900$. I have it but I have other bills too. Got a good one from same place all the shops here get it. Threw it in myself. Had to rent tools.. less than 150$ out of pocket.
I wanted to record it too. There isn’t a good one on here.
Anyways. Thanks. These how to are great to have. Good job.
Saved me. Thanks. After changing the battery, got disconnected the key fobs. Thanks a lot!!
Man, I use your methods for everything on my 02 e39 5si. I really appreciate your help. I’ve done so much to it, it’s crazy! I’m down the interior and steaming rack. Driving it again! Had it since 15 too. I’ll never get rid of it.
WOW! WHO KNEW IT WAS JUST A RE PROGRAM ISSUE!
at first thought it was the battery was watching videos of replacing it but heard risky on that SPECIALLY IF REPLACING WITH A NON RECHARGEABLE BATTERY so was gonna just get me another one
thank God I was able to watch this video it saved me some money !!
carlos santiago
What year is your car?
I have a e60 2006 and I was wondering if works.
I think I will give it a try anyways 😊
Thanks Nathan! I did reprogramm it with this metod on my 2003 Z4!
Thanks, battery went, changed it but remote seemed dead, watched your video and hey ho it worked.
Which device do you recommend for your remote?
worked for me e53.. took a few tries but it worked
Live saver I changed my head liner and when i unplugged the sensor on the roof it just of un synced. Great video cheers
My locks work with old key. Car’s electrics cut on.... but won’t do anything when you turn to start the motor..... nothing. Could it still be the key... or would it be the ews module... or the ring antenna?
I got mine from amazon.
Do I have to have the original stereo installed for it to program because it's not working
The reprogramming didn't work for my 2001 X5.
Is there a way to open the fob to clean it?
thank you, its been very clear and concise information
Watched your video and that didn't work but I have x3 07 so I actually went and turned to Acc and pressed the unlock and 3 times lock on the key fob and it cycled the locks . Still that you for everything that to share
Thank you just bought new key from dealership. They didn’t program lock unlock
bmw e39 2002 i lost all in the plastic of key i have only metal ,when i turn it right no contact what to do ? can i buy from other car heart of key and move it in my and do this like you ?
Do I have to get key cut to program door locks only if I buy a replacement key??
I have a 2003 x5
And my spair key won't start the car, u suggested a box to program the key from Ebay could you tell me the name of that box
Thank you
Thanks mate appreciate you I have a x5 e53 it worked perfectly cheers 🍻
man! you nail it...! thanks I was literally trying to figure out how to program my key I just got from the dealership. lol
Yea after looking for hours for a decent video and not finding it I thought I better just make one , thanks for watching
I need to know how to unlock a 2005 BMW X.3 will not open with the key
I have a 2019 X7, want to clone my key, is it possible? What device I should buy to clone from my existing key. Do you have a video on X7?
If that doesn’t work does it mean that the batteries are shot or fob doesn’t work
How do I find the box to program the new key. On ebay yes, but what's it called. Thank you
Hello Nathan. Thanks I'll try this.01 X5. My original key battery is dead. I was able to turn the key right on the door and the entire car would lock and turn left and all doors would unlock. I'd hear a beeping sound as well I guess to let me know if the security system was disabled or not. That suddenly stopped working. Any ideas where to start?
thank you so much my friend you save my life i tried so many ways but didn’t work when i did it the way you said it works right away thank you for the tip bro god bless you
I bought a 03 BMW X5 about a month ago. The key worked fine
for remote lock and unlike, until today.
The key works fine using the key lock on the drivers door. But I cannot use the remote. I followed the instruction on your RUclips
post. It just does not work for the
remote. I only have the one key. Any ideas on getting the remote to work? Thanks for any information you can provide.
Robert V the battery inside the remote probably died
Thanks. Do you have experience in change the battery?
Great job ! worked the first time
Hi Nathan, I have a 2006 bmw x5 & today the key wouldn't go into the ignition, any idea? , thanks Juanita
ANy idea why my 2002 bmw x5 keeps needing me to program my key fob? It will start the car but wont wireless open or lock doors. Untill I perform the relearn.
Hi. I got a new key from my local BMW shop. It programmed it to open and lock the vehicle but it's not staring the car. Can you help with how to code the key ???
Hey Nathan, I have the issue that you described with those e46 ebay keys,. So mine should be an original one, but all of the sudden I can unlock, lock the car, use all the electrical stuff such as radio, head and tail lights, and fog lights as well, but the car would start whenever it wants. eventually it always starts, but it can take up to 20 tries. Sometimes, when I press down on the unlock button and hold for at least 5 secs, it starts. What would you and the other guys in the comments suggest?
Hi, so if i buy a extra key from ebay, this is the only thing i need to do for it to work? Also cut it ofcourse?
Your video help me a lot. Thank you.
If i didn't program the key, and i put the key without pushing the remote button to open the car (opened it manually) will it turn on?
Excellent help, thanks very much. From Uxbridge, Canada.
Hi Nathan, you helped me a couple times before, I got to ask your advise again, my '98 540i with the small screen display in the car shows that BC code function shows 0000 and car will not start, do you know how to get the code? is it part of VIN or ...? I would really appreciate your say :)
What am I looking for on the Gm module? Is there a way with INPA to monitor what switches are not closed in the locking system?
I have a 2000 323ci and it just stop working out of nowhere, bought new key,but having trouble. Basic trouble is key not starting car but all light on. Is there anything u can helpw me qith
tnx you again Nathan you save me once more time hehe, btw my other key seems to work randomly sometimes it locks and don't unlock or other wise or non at all lol I try to reprogram it but I couldn't, maybe the battery is dying ? any idea whit that other key?
Do you have to reprogram all keys if you reprogram 1? If so what are the steps to reprogram additional keys
Just did this after my battery died. Worked the charm
Does this car have Bluetooth? For music can someone help I bought a 2005 x5 3.0i and I see the telephone button is there anyway to connect todays smartphones to play music?
what about older models like 97 z3?
Thank you it worked on 2002 BMX X5!!
Nathan, I've tried all of these steps and still no work. Is it true that there is a rechargeable battery inside or am still missing something. the pin actuator is missing from the fuel door. Could that be the issue. Doors lock and unlock with the key in the door.
Hey Nathan, great video. I had 2003 535 and it used to roll down and roll up windows and sunroof with key fob unlock and lock buttons. I recently got 2006 X5 and it rolls down windows and sunroof with key fob unlock button but it does not roll them back when I press the lock button. Any ideas what could be the reason or how to activate this feature. Thanks
Nice job Nathan!
Pls what device did you say is on ebay that can be used to program a new key to start the car? Very urgent
If ur door doesn't chime when you have the key in ignition with door open you need new key. Chip got demagnetized. Happened to me. Don't waste your $ on other checking other stuff check key first. Was expensive ( $273.89) but I rather pay for something that actually works and not say, "oh well, at least I have a new starter..
i got the key box to program the keys to star the car but only 2 keys would start the car !! i test the keys with the box they are all good because all the information of car comes up vin number and stuff !! how can program all 4 keys to star the car ??
I think you can only have 2 keys programmed at once
Work on a BMW 2005 X3 thanks for the advice
Hello Sir. Thanks for the BMW video you post. They Help me out a lot, but I was wondering if you could help me with a issue Im having. I have a 2004 BMW X5 E53 4.4l. It’s making a ringing noise. The cause of the problem is a H10 gong. It just won’t stop ringing. Do you how to fix this. There’s really nothing on RUclips explaining or showing us how to fix the problem. If you could do so I’d appreciate that. Thank you for your time Sir.
V/r
Jason
I was wondering if you could sent me a link where I can buy the box to reprogram the keys to start the car.... thank you.... love your videos.
Hi I have tried all possibilities but everyone is talking about 3 button key(unlock key, BMW logo(lock key), trunk key). but my problem is when I bought my BMW 2000 318i, I got key with only two buttons lock and unlock but still I tried the reprogramming procedure few times still struggling with the key fob. I have already replace the battery as well. My key fob works sometimes but most of the times it doesn't work any help please.
Question I had my original key on an X5 e53 which stopped working completely I purchased a new one from my local dealer and they programmed my fob (lock/unlock) function I purchased a couple more off eBay after market I tried to program a total of 3 keys but for some reason it only lets me program a total of 2 I'm assuming that it's because it must have a total of 4 keys programmed to it meaning the 2 original keys that the vehicle came with the vehicle when new
(only got one when I purchased the vehicle)
Which is the one that stopped working the new one I bought from the dealer direct that would be the 3rd key and 1 of the 2 that I purchased from eBay. To make it a total of 4 keys programmed keys to the vehicle but 1 of the keys that came with the truck when new I didn't get and the other that i did get when I bought the car doesn't work which only leaves me with 2 working keys (original purchased from dealer) and 1 of the 2 that I bought from eBay my question is how do I delete the 2 keys the one that's not working and the one that I didn't get when I purchased the vehicle? Any advice?
Thank you so much was getting charged 1500 rands(100usd) to reprogram my key
1999 BMW 328i Key will start the car but not remotely lock or unlock doors. I replaced the battery in the key and have tried multiple times the programming method in you video. The key flashes after programing but door locks do nothing. Any other ideas?
Thank you so much very helpful and good video Lou and clear 😀
Subscribed! Thx for the info!
Thanks you my freind u saved the day , hats of to you brother 👍🙏🏼😁😁
Worked thank you 👍🏼
Great video Nathan!
+juan mejia Hope it helped and thanks for watching.
2009 BMW x3 Good battery everything fully charged put the key in does nothing hooked up to scanner says no key
Do you know which unit i need to buy to program the transponder in a 2007 e85 z4m? The key is an lx8 fzv.
Very good vídeo.
Simple and understandable.
This was very helpful thank you
Good looking out❤
Worked for me! Thanks you sir!😀
what is a good tool to program to start the car with a new key i seen a few but i want a tool that would work with my 2002 bmw e39
You will need a ews3 transponder programmer, from ebay they are around $40
nando4755 q
Worked like a charm Nathan Thx🙏
Nathan I have a BMW E46 M3 I lost the keys ordered a new key I have it how do I program the alarm please let me know thank you
Mine still does not work after doing everything you said even the key wont lock the door it just turn the lock and thats it
Will this work with an 1999 e39 523i?
is this instruction relative to buying say, an ebay bought remote fob chip? Pls let me know asap. I would really appreciate it. THanks!!
new to the bmw scene and I just bought a 98 E38. The key opens the trunk and that's it, whats wrong? Also I can lock all the doors with the key and the alarm chips but when I use the button in the ceter of the car it doesn't work, help
The doors have to be closed to use the center console button on the pre 99 cars, there is a 7.5a fuse in the trunk that controls the locks
Ok thanks let me check it. shouldn't the key arm the alarm and lock the doors upon pressing the button?
What's the tool to sync it call
Hi Nathan
At last someone has explained an extra programming process, ie the OBD and ring device. Can you tell me what the correct description of that device is called please?
Cheers
Chris
+Chiggy Chiggy To actually program the key itself to the car you will need a bmw key transponder programmer from ebay, they are around $50
hey i bought 2 keys for 2005 bmw x5..both keys i program thru your video and they have been cut already,but im missing a step or something!!..once i wanna start the truck with those keys,truck wont start..any ideas? thanks!
+Marco Roman Sooo the video is only to program the key fob , not the transponder, you will need a little box off ebay to program the keys you have
Would you knw what those boxes are and how to installed/program?
www.ebay.com/itm/New-AK90-Key-Programmer-for-BMW-EWS-2-3-4-CAS-from-1995-2009-High-Quality-/221737074661?hash=item33a08f3fe5:g:U7IAAOSwPgxVP7pz&item=221737074661&vxp=mtr
Thats the china programmer, they work fine, for 1995-2009 bmw's
When i turn on my car (bmw x5 2001) the AC atuomatically turn on . How can i stop this .
Thanks buddy you me help a lot
the key box you were talking about to program key to start the car can u send m e a link to a good one thx
www.ebay.com/itm/2016-AK90-Key-Programmer-for-all-BMW-CAS-EWS-Fom1995-2009-High-Quality-/152192264804?hash=item236f5daa64:g:0XMAAOSwBahVZXk~&item=152192264804&vxp=mtr
Good luck and Avery good video 🇬🇧👍
Thanks it worked😁
What’s the box called
Thank you, it did work for me!
Heck yeah brotha… your videos are always super informative 🙏
can i program my own key fob without dealers help??.2008 528i bmw..thanks
very informative . Thanks Nathan
Hey guys, i really need help with my car :(
Model : E66 750Li
Error Code: 2F44 EWS Manipulation Prevention
car does not want to start
Is it a problem with the key? any solution?
I can't find that 5amp fuse in my e83? 2004 x3 bmw can you help me locate please
I tried it with no success. Tested the battery, it's good. 3+volts.
Programming Additional BMW Key Fobs
So if you have a working key fob, but wish to program additional keys, follow these steps:
Take the working key fob along with the ones you want to program inside the car with all doors and windows closed.
Put the working key into the ignition and turn to position 1. At this point, the dash lights and accessories should turn on.
Turn the key back and remove.
On the working key, hold down the unlock button and press the lock button (the BMW logo) 3 times, then release the unlock button. The doors will then automatically lock and unlock.
Take the new key and hold down the unlock button while pressing the BMW logo 3 times, then release the unlock button. Again the doors should lock and unlock, and you’re done.
Programming a New Key from Scratch
These instructions are for programming a new key when you do not have a working key fob.
Insert the key into the ignition and turn it to position 1 and back rapidly 5 times.
Remove the key
Hold the unlock button and press the BMW logo 3 times, then release the unlock button.
If you have additional keys you’d like to program at this time, repeat step 3 within 30 seconds from the original key programming.
Turn on the ignition to complete the process.
Yes sir it worked it’s really did