@@henobani8039 I have a 300W Pro ATTIS and uses the dimmer that came with it. Just uploaded a short of Super Skunk Automtacis week 4,5 (first 4 week 20/4 now 18/6). I am really looking forward to get my hands on the controller 3.0 or if it is not compatibly the 2.0. Want to simulate sunrise and sunset to reduce stress. And even want to use a 200W version for my vegi tent to serve mother plants. What LED you need, depends on what size your tent is, what you are planning to do with it. Maybe my 1m x 1m is bit large for the 300W Pro version 80x80 - 90x90 would be the best I read often. But it is still fine. I am allowed to grow three plants in Germany. I will stick to the law.
@@maschinenorganismusist es nicht so, dass eine höhere Wattzahl auch potente THC Werte bedeuten (und nicht nur die Anzahl der Blüten) oder kann eine 200 Watt Zahl die gleiche Qualität der Pflanzen erzeugen wenn das Zelt kleiner ist?
@@hanschenklein7990 nope, mehr THC kriegst du durch Zucht und Sortenwahl. Es gibt potentere Sorten und Sorten mit weniger THC Gehalt. Das THC erzeugt die Pflanze zum Schutz vor UV Strahlung. In den wenigsten Lampen ist das groß dabei. Auch habe ich noch nie gehört, dass mehr UV Licht zu mehr THC führt. Es streiten sich eher alle darum, ob es überhaupt was bringt, UV Zusatzstrahler einzubauen. Zur Watt Zahl. Also man kann das nicht so Pauschal sagen, was du genau brauchst. Das Licht verteilt sich auf eine Fläche, je nach Distanz. Man könnte sagen, die Pflanze kann es nur eine gewisse Menge an Energie aufnehmen. Nimmst du zu viel Leistung und dimmst nicht runter, verbrennst du die Pflanze. Also holst du dir eine zu starke Lampe, dimmst du am Ende eh runter. Meist sagen einem die Hersteller und dann hast du noch Spiel. Ich habe 1m x 1m, dort die 300W Attis und eben nur die drei erlaubten Pflanzen. Das reicht völlig aus. Ich würde sagen, Zeltgröße ist das wichtig bei der Wahl der Lampe. Bei der Wahl des THC Gehaltes, würde ich eher auf die Sorte achten. Es gibt aber auch tricks, wie Trockenstress und Dunkelphase vor der Ernte, die die Pflanze veranlassen. Habe ich bei Vince and Weed gelernt, glaube ich. Werde ich nun ausprobieren mit der Dunkelphase vor der Ernte. Aber dennoch wird dadurch aus meinem Super Skunk weiterhin zwischen 15-20% THC haben. Eine 30iger Pflanze wie Cali oder A.M.G. wird daraus dann immer noch nicht. Bei den Shops mit den Samen, steht meist dran was dich so erwartet. Wobei die Werte unter optimalen Bedingungen von dem Züchter erreicht werden. Der kennt ja seine Pflanzen schon gut. Egal wie viel %, selbst angebautes Gras ist einfach lecker.
there is really only one single thing i would change, that is to separate the driver off the led bars so i could put it outside the grow tent... other than that it's perfection.. i wonder if i could do it myself somehow
Dear Lumatek, is driver removable from the top of the 300P fixture to be placed outside the tent? also, how hot does 300p get after few hrs being ON on full power? thanks
I would love to buy a Lumatek product again, given that the Lumatek HPS driver was that great and reliable 15 years ago. This product is in the range of what I am looking for (250-300W), but the internal driver is an absolute show stopper for me. Why oh why? I would love a "proper pro" version with an external driver, providing much better heat management and easier replacement in case of failure?
As of today all UK distributors will tell you,,,,,,,,,,, This model is not in stock as of yet and we do not have an ETA for its arrival. Lumatek have also not provided us with a cost price yet either, so no pre orders are being taken.
Hi all you good people @Lumatek. I've got two of the ATS 300 Pro, and I love them! I've only used them for about 8 weeks. I got them during a grow, where the qb's I had before started failing, and I traded in the qb's for these babies. They are a lot more powerful than the qb's I had, and I only have a 90x120x180cm (wlh) grow space, so the ATS 300's fit in there like a glove...😉 I'm starting up a new grow in the next few days, and I've been thinking about adding co2, because of the powerful lamps and limited space. What would you guys @Lumatek, and everyone else following this thread, advice be? Thanks😉
We recommend checking some CO2 info here lumatek-lighting.com/lumatek-zeus1000w-xtreme-ppfd-co2/ and also check other reviews on the web. The ZEUS 1000W Xtreme PPFD CO2 is designed to deliver utra-high PPFD for CO2 enriched Grow Spaces and may give you a good example on how CO2 works. ;)
Hello, can you please tell me if you are adjusting the height depending the phase your plants are and are you dimming the light as well?? You know, i need to know please, REALLY SUPER PLEASE, what would be the proper height and persentage of light for seedlings (20%-40%-60%-80%-100%), vegative and flowering phases...can you help me, maybe you already have a video explaining that?? If not please can you tell me about the hight for hanging and light persentage for those three stages?? Is the only think i cant find on internet or in the data sheets for the Attis300w!!! Thank you in advance!!
Hello. I bought a LUMATEK ATX 200W PRO. I figured out everything, but the problem is I can't find a table of the distance of the lamp from the plant my box is 80-80-180 starting from small sprouts and up to one meter. Please help me.
Hi there Waldemar. You'll find the solution in the link below to our “LED Grow Light Strategies” which is a document made by our experienced product development and technical department, to ensure you are making the most out of your Lumatek set-up performance per product and grow stage. www.dropbox.com/s/fnke7ozhp59fuix/LUMATEK%20GROW%20LIGHT%20STRATEGIES.pdf?dl=0
We don’t usually recommend a specific distance and intensity because it will vary with several factors. Some require more PPFD than others, the growth setup may influence this if you're counting on the reflection and other factors. So if we recommend a certain value it could not be applicable to all our growers. But please be aware that there are always common issues regarding height distance from canopy to the light. For example, if the light is too far, lower leaf drop, stretching, stunted growth, and or even growth stop may occur. If the light is too close canopy leaf burn, bleaching, stunted growth, and growth stop can also happen. To help you avoid any of these issues you can check our detailed product specs sheets on our website, and ensure that your canopy is receiving the optimal PPF levels according to your growth stage.
Mainly the PPF and Efficacy of the products but you can know all about them on our website lumatek-lighting.com/lumatek-led-product-range/ . Happy Growing.
As a manufacturer, Lumatek-Lighting only conducts business-to-business trading and does not sell directly to end customers. In order to get one of our products please find a reseller near your area on our website’s menu ‘Distribution’. Happy Growing.
Hi there. Thanks for reaching out and for your interest in our products. As a manufacturer, Lumatek-Lighting only conducts business-to-business trading and does not sell directly to end customers. In order to get one of our products please find a reseller near your area on our website’s menu ‘Distribution’.
@@LumatekLighting im to ill to work as a DJ. I would take the light for medical use. But nice idea...👍 ...should i grow Kids in the club under it? 😂😂😂 Im sure your lights are great. Keep up the great work. 👏👏👏
I have the samples, I already tested the PPFD, it is much lower than any Samsung made led grow lights, at least 30% lower than Samsung chips led grow lights, the chip is not brand one, the PCB is very loose, heat sinking is so bad.
2.7 μmol/J and 2.5μmol/J ??? meanwhile i spoke with people that are selling them two days ago and they had put stickers on them that said that their efficacy is 2.03 for both...Also read that their diodes are from Lumled ,an unknown chinese brand(for this i am not 100% sure) .. Anyways i vote NO. HLG ftw.
Hello. I bought a LUMATEK ATX 200W PRO. I figured out everything, but the problem is I can't find a table of the distance of the lamp from the plant my box is 80-80-180 starting from small sprouts and up to one meter. It's cannabis.. Please help me.
I can tell you this lights are shit, as long as you are very professional, you can make such conclusion, the chips are not brand ones, the PCB is loose, the heat sinking is bad, the price is very expensive, this is Lumatek
I got a lumatek ats pro 200w in a 90x90x178 tent,u dont know what u talking off man.ofc it gets alittle hot which is why u rig ur tent with an exhaust and co2 filter,then put a passive air intake on the bottom and ur problem is solved.i swear u kids today got no idea how hot hps used to run b4 led came out😂
Those smoke effects at 4:32 are so funny and a bad idea when showcasing an electrical light product hahaha omg
Just ordered the ATS 200W. Really looking forward working with it.
AND?! how is it , tell me everything. what light % and what distance are you using for seedlings / early veg
@@henobani8039 I have a 300W Pro ATTIS and uses the dimmer that came with it. Just uploaded a short of Super Skunk Automtacis week 4,5 (first 4 week 20/4 now 18/6). I am really looking forward to get my hands on the controller 3.0 or if it is not compatibly the 2.0. Want to simulate sunrise and sunset to reduce stress. And even want to use a 200W version for my vegi tent to serve mother plants. What LED you need, depends on what size your tent is, what you are planning to do with it. Maybe my 1m x 1m is bit large for the 300W Pro version 80x80 - 90x90 would be the best I read often. But it is still fine. I am allowed to grow three plants in Germany. I will stick to the law.
@@maschinenorganismusist es nicht so, dass eine höhere Wattzahl auch potente THC Werte bedeuten (und nicht nur die Anzahl der Blüten) oder kann eine 200 Watt Zahl die gleiche Qualität der Pflanzen erzeugen wenn das Zelt kleiner ist?
@@hanschenklein7990 nope, mehr THC kriegst du durch Zucht und Sortenwahl. Es gibt potentere Sorten und Sorten mit weniger THC Gehalt. Das THC erzeugt die Pflanze zum Schutz vor UV Strahlung. In den wenigsten Lampen ist das groß dabei. Auch habe ich noch nie gehört, dass mehr UV Licht zu mehr THC führt. Es streiten sich eher alle darum, ob es überhaupt was bringt, UV Zusatzstrahler einzubauen.
Zur Watt Zahl. Also man kann das nicht so Pauschal sagen, was du genau brauchst. Das Licht verteilt sich auf eine Fläche, je nach Distanz. Man könnte sagen, die Pflanze kann es nur eine gewisse Menge an Energie aufnehmen. Nimmst du zu viel Leistung und dimmst nicht runter, verbrennst du die Pflanze. Also holst du dir eine zu starke Lampe, dimmst du am Ende eh runter. Meist sagen einem die Hersteller und dann hast du noch Spiel. Ich habe 1m x 1m, dort die 300W Attis und eben nur die drei erlaubten Pflanzen. Das reicht völlig aus. Ich würde sagen, Zeltgröße ist das wichtig bei der Wahl der Lampe. Bei der Wahl des THC Gehaltes, würde ich eher auf die Sorte achten. Es gibt aber auch tricks, wie Trockenstress und Dunkelphase vor der Ernte, die die Pflanze veranlassen. Habe ich bei Vince and Weed gelernt, glaube ich. Werde ich nun ausprobieren mit der Dunkelphase vor der Ernte. Aber dennoch wird dadurch aus meinem Super Skunk weiterhin zwischen 15-20% THC haben. Eine 30iger Pflanze wie Cali oder A.M.G. wird daraus dann immer noch nicht. Bei den Shops mit den Samen, steht meist dran was dich so erwartet. Wobei die Werte unter optimalen Bedingungen von dem Züchter erreicht werden. Der kennt ja seine Pflanzen schon gut. Egal wie viel %, selbst angebautes Gras ist einfach lecker.
@@hanschenklein7990 musst den growplatz halt von der größe anpassen und Pflanzen stückzahl. Das glaube ich sollten die gleich potent sein
Funny enough I need an extra light👍I have the Zeus 600 and this will be perfect addition for that extra help
The 200W Version is my baby, works just fine and my Plants love it!
Hello friend, whats your grow space ?
@@banema 60x60x160cm
@@talkingSerial how many plants was in the tent?
Hab die 300 pro! Super
Habe Beide 200w und 300 w und bin sehr zufrieden
I love my ATS 200W it goes well my 100w supplementary bar
Awssssssome guys.
Looks awesome!
I've got an ATS 200w and a lumatec 100w supplementary bar in my tent 💯🇬🇧💨
Whats the dimming % and height cm you used for which phases? Are the lumatek book infos correct?
there is really only one single thing i would change, that is to separate the driver off the led bars so i could put it outside the grow tent... other than that it's perfection.. i wonder if i could do it myself somehow
Dear Lumatek, is driver removable from the top of the 300P fixture to be placed outside the tent? also, how hot does 300p get after few hrs being ON on full power? thanks
Finally it is removable? 😉
Hi I love ur lights 👍🏻
When will the Supplemental Light Bar come out? Thanks
Soon, soon, soon. :)
Hi Lumatek Team, what's the length of the power supply cable for the ATS PRO Line and for the Zeus/ Zeus Pro Line ? Thanks
DREAM
I will test run one of these beauties for you 😉
I would love to buy a Lumatek product again, given that the Lumatek HPS driver was that great and reliable 15 years ago. This product is in the range of what I am looking for (250-300W), but the internal driver is an absolute show stopper for me. Why oh why? I would love a "proper pro" version with an external driver, providing much better heat management and easier replacement in case of failure?
Dont buy it. Is hot like HPS
@RootsGuerilazz no.
Very nice!! I have ordered 1 :) Normally I should receive within 2 weeks. Delivery have been postponed.
Is it worth the money?
@@ludacorleone8563 Yes, I really love my ATS300W pro. Compared to my previous 400W hps, a lot less heat and intenser light
@@svdb03 im a month away from finishing my 2 plant wich is a northern light if all goes good maybe in the future I will consider this one
@@ludacorleone8563 nice! I have finished also a few and the results are insane!! I really love this lamp!!
@@svdb03 good bro i cant grow anymore
Danke.
As of today all UK distributors will tell you,,,,,,,,,,, This model is not in stock as of yet and we do not have an ETA for its arrival. Lumatek have also not provided us with a cost price yet either, so no pre orders are being taken.
Hi all you good people @Lumatek.
I've got two of the ATS 300 Pro, and I love them! I've only used them for about 8 weeks. I got them during a grow, where the qb's I had before started failing, and I traded in the qb's for these babies. They are a lot more powerful than the qb's I had, and I only have a 90x120x180cm (wlh) grow space, so the ATS 300's fit in there like a glove...😉
I'm starting up a new grow in the next few days, and I've been thinking about adding co2, because of the powerful lamps and limited space. What would you guys @Lumatek, and everyone else following this thread, advice be? Thanks😉
We recommend checking some CO2 info here lumatek-lighting.com/lumatek-zeus1000w-xtreme-ppfd-co2/ and also check other reviews on the web. The ZEUS 1000W Xtreme PPFD CO2 is designed to deliver utra-high PPFD for CO2 enriched Grow Spaces and may give you a good example on how CO2 works. ;)
Worst LED ever. I have small and yellow plants under this lamp and can use only 50% because more = brutal heat. Is hot like old HPS
Hello, can you please tell me if you are adjusting the height depending the phase your plants are and are you dimming the light as well??
You know, i need to know please, REALLY SUPER PLEASE, what would be the proper height and persentage of light for seedlings (20%-40%-60%-80%-100%), vegative and flowering phases...can you help me, maybe you already have a video explaining that??
If not please can you tell me about the hight for hanging and light persentage for those three stages??
Is the only think i cant find on internet or in the data sheets for the Attis300w!!!
Thank you in advance!!
mate, did you get an answer for this? thanks
@@denguedenguedengue4061 I would like also to know. Does anybody know?
www.dropbox.com/s/fnke7ozhp59fuix/LUMATEK%20GROW%20LIGHT%20STRATEGIES.pdf?dl=0
@@UKpitbull
Wow!!! Thank you soooo much!!!
No probs pal.
in the sunset mode they should include a flower innitiator.5 minutes before lights out and five minutes after lights out..then flower 11 on 13 off..
Is the 200W one enough for a 90x90x178cm tent?
Know all about it here: lumatek-lighting.com/ats200w-pro/
Can I take the cover off my ATS or should I just leave it for now??
Hi there. If you are referring to the plastic cover we recommend to not remove that cover. It's a protective shield for the diodes of your ATS.
@@LumatekLighting thank you, I asked because I see on a video that it restricts the lumen in some way, but yes I leve it
Hello. I bought a LUMATEK ATX 200W PRO. I figured out everything, but the problem is I can't find a table of the distance of the lamp from the plant my box is 80-80-180 starting from small sprouts and up to one meter. Please help me.
Hi there Waldemar. You'll find the solution in the link below to our “LED Grow Light Strategies” which is a document made by our experienced product development and technical department, to ensure you are making the most out of your Lumatek set-up performance per product and grow stage.
www.dropbox.com/s/fnke7ozhp59fuix/LUMATEK%20GROW%20LIGHT%20STRATEGIES.pdf?dl=0
I bough one, What distance i have to put it above a plant in each life state? I am in week 2. 4cm hight
We don’t usually recommend a specific distance and intensity because it will vary with several factors. Some require more PPFD than others, the growth setup may influence this if you're counting on the reflection and other factors. So if we recommend a certain value it could not be applicable to all our growers.
But please be aware that there are always common issues regarding height distance from canopy to the light. For example, if the light is too far, lower leaf drop, stretching, stunted growth, and or even growth stop may occur. If the light is too close canopy leaf burn, bleaching, stunted growth, and growth stop can also happen.
To help you avoid any of these issues you can check our detailed product specs sheets on our website, and ensure that your canopy is receiving the optimal PPF levels according to your growth stage.
why never show the dimmer?
Should I stock this range guys?
Absolutely.
When will they be available in Australia?
It is already available for pre-order. Check our resellers here: lumatek-lighting.com/distribution/
which specific LEDs are used. brand and model
You'll find all that info on product spec sheet on our website. 😊
What is the difference between the 465w compact led and 465w compact led pro?
Mainly the PPF and Efficacy of the products but you can know all about them on our website lumatek-lighting.com/lumatek-led-product-range/ . Happy Growing.
Can driver be removed from light to remain outside grow tent?
Unfortunately not.
@@LumatekLighting No problem - I bought the ATS 300 Pro, it was delivered today.
👍
Wonderful choice. :)
@@LumatekLighting I just harvested today, the light is amazing! Very low heat output, and massive growth.
When is it out?
Already available for pre-order. :)
I would trade 10-15% of the blue to have UV instead. If you know you know!
Noted. 😎
Whats the price for the attis 200w
As a manufacturer, Lumatek-Lighting only conducts business-to-business trading and does not sell directly to end customers.
In order to get one of our products please find a reseller near your area on our website’s menu ‘Distribution’.
Happy Growing.
@@LumatekLighting hes embarrassed to say what the suggested price is, lol
Is it available in the US ?
No, but you can reach our sister company in US and Canada Photontek Lighting.
what size of growtent for this 200 W?
The footprint of this fella' is up to 0.8x0.8m. Check more about it here: lumatek-lighting.com/ats200w-pro/
No seller in germany … when i can get one?
We have resellers in Germany. Check the possibilities here: lumatek-lighting.com/distribution/
@@LumatekLighting Yes, I've already checked that, but nobody has an ats 300pro on offer
ONLY in September
@@natureboyneo8779 ooh really? I received info that it would be available in august
@@LumatekLighting do you have resellers in Sweden?
Какие светодиоды стоят на лампах?
Check the spec sheets on our website to know all about it.
👍
How many pot gram ? 300 w
It depends on many factors and also the grower's ability. ;)
Think I got stunted growth with the Zeus
Move light closer and turn it up to 100
Learn how to grow
What's the price £
Hi there. Thanks for reaching out and for your interest in our products.
As a manufacturer, Lumatek-Lighting only conducts business-to-business trading and does not sell directly to end customers.
In order to get one of our products please find a reseller near your area on our website’s menu ‘Distribution’.
It's a shame I can't afford one. 😥😥😥
The ATS Pro 300 would be my choice. 😉
If you send me one for free i would produce a Song for you guys. 😘
Only if you put our lights in your DJ set as part of the show.
@@LumatekLighting im to ill to work as a DJ. I would take the light for medical use. But nice idea...👍 ...should i grow Kids in the club under it? 😂😂😂
Im sure your lights are great. Keep up the great work. 👏👏👏
I have the samples, I already tested the PPFD, it is much lower than any Samsung made led grow lights, at least 30% lower than Samsung chips led grow lights, the chip is not brand one, the PCB is very loose, heat sinking is so bad.
2.7 μmol/J and 2.5μmol/J ??? meanwhile i spoke with people that are selling them two days ago and they had put stickers on them that said that their efficacy is 2.03 for both...Also read that their diodes are from Lumled ,an unknown chinese brand(for this i am not 100% sure) .. Anyways i vote NO. HLG ftw.
You can always choose to read and speak with the truth here: lumatek-lighting.com/lumatek-led-product-range/
Hello. I bought a LUMATEK ATX 200W PRO. I figured out everything, but the problem is I can't find a table of the distance of the lamp from the plant my box is 80-80-180 starting from small sprouts and up to one meter. It's cannabis.. Please help me.
You're a genius😂
Lumatak will make Money with comercials before RUclips Clips? And it comes temu "buy a cheap China stuff" 😅
I can tell you this lights are shit, as long as you are very professional, you can make such conclusion, the chips are not brand ones, the PCB is loose, the heat sinking is bad, the price is very expensive, this is Lumatek
Well we are much more than that for sure.
Show me a better light for the price of around 400$ for 1x1m
I got a lumatek ats pro 200w in a 90x90x178 tent,u dont know what u talking off man.ofc it gets alittle hot which is why u rig ur tent with an exhaust and co2 filter,then put a passive air intake on the bottom and ur problem is solved.i swear u kids today got no idea how hot hps used to run b4 led came out😂
Im done here ,,,, i cant tell what the bloody ell hes saying. 49 : 00 sec i gave up .
Could it be "an unmatched duo"?
it is weey to expensiv ! its not normal wey to hige
tell me one better cheaper light :D
You now were it a marti
all this info is useless.....how many lumens?
Check product spec sheets (links on the description). We're sure you'll find useful information there. 😉
@@LumatekLighting I looked at the sight and the specs there, didn’t see it
Lumens are something thats been used like damn 10 years ago....