My grandfather was a machinist in the L&N Corbin, KY roundhouse beginning in the 1920’s up to about 1960. I was about 9 years old when he took me there and I got to see lots of steam locomotives in various stages of repair, and even a few diesels. That was the shop that took care of the motive power for the coal fields of Eastern Kentucky, and later they built a big coal washing facility in the yards to clean all the coal as it came out of the mines. Corbin still has quite a bit of activity for CSX now, but the old roundhouse is long gone, just memories. My grandfather walked two miles to work and back every day, then worked in his huge garden, a real man, but quiet. His car was to drive to the grocery store on Saturday and church on Sunday. He also served in the Navy around 1915 and was in Vera Cruz in the Mexican Revolution, but got out before WWI.
My Grandad was a Steam Loco mechanic for the Pennsylvania RR at their Indianapolis shop. My Dad hired on there too after he came home from WW2. Dad was a machinist. When the Diesels came in Grandad couldn't or wouldn't learn the new tech so he quit & started his own business doing steam boiler repair. !
I drove truck for a common carrier making deliveries/pickup's to the Northtown yard. What an amazing place with great shipping/recieving personal. Just getting from the street into the area of the shop/shipping & receiving/under the hump tower to the signal shop was always quite the experience!
Me too. I served my machinist apprenticeship with the old NS and later with the NW/NS in Roanoke, Va. Also worked the NS Shaffers Crossing facility that is very similar to the BNSF shop in the video. There I worked in the material management dept. keeping supplies available for shop workers. That facility started operation in 85. I helped set up the MM dept before it opened to locomotive repair and inspections. Yeah, I miss it and other jobs I had on NS. The last job I had for over 6 years was control station operator. That was a good job too and I miss that one also. The only drawback to that job was I worked every weekend during the time I held a regular job there and I got kinda tired of that when thinking about people going out Friday or Saturday evenings to dinner etc. while I had to work but overall I really liked the locomotive shops and the operators jobs.
I worked at Northtown Diesel Shop for 20 years along with extended sojourns in Alliance Nebraska and Gillette Wyoming. Enjoyed the work and the people I worked with. Nice video of my second ‘home.’ This video must have filmed on midnights.
Awesome production. Super clean work area. Switched railcars in an aggregate load out operation in South Florida. Learned to respect the power of rail operations. Thanks for sharing!
Those moves are never easy. CPKC is about to move all of their US dispatchers to Kansas City. Would we have heard you dispatching lines in Minnesota? Maybe we would recognize your initials?
I once got a back haul of locomotive engine oil that I delivered to a Kansas railway maintenance facility and I found it very fascinating. I asked someone there how much oil goes into one of those locomotives and he said 400 gallons and that unless the oil became contaminated with water or something it would be in the engine for the life of the locomotive. I also saw some of those traction motors and was impressed with the seemingly small size of them compared to the size of the locomotive the power and incredible amount of torque they must have to pull a train.
@@Whoflungpouu I was amazed too but I was also amazed that the engine took 400 gallons of oil. Think about it, thats almost eight 55 gallon barrels of oil.
Yes it's nice. Pity that BNSF didn't adopt the green and black color scheme rather than the black and pumpkin they use now. At least the BN scheme was distinctive not like now where at a glance you can mix up a UP and BNSF train especially if they're dirty
People that work or employed there were all fascinated with trains since childhood. Its in thier genetics or blood. Family members probably work there too and they all love that line of work. I lived by train tracks when I was young would go out of my way to watch every train as they went by our house. I didn't miss a car. I loved it when then stopped at the foundry nearby and hit the brakes. You could hear every car go boom boom boom right down the line of cars. Even at 2 am I would listen for them.
I was a locomotive electrician for 12 years. Very few of us enjoyed the work. It’s very dirty work, very complicated at times and you are continually under time pressure. Just being honest.
I can completely understand. It is great seeing this from a railfan perspective, but I can agree it is different from some who has worked in this environment's perspective. Thank you for sharing!
This was one of the first places i went when i received my drivers license in the mid 90's. i had an after school art magnet video productions class. i was working on a video of different classes of locomotives and what they do (e.g., SW1500 is for swtiching etc.) i have some old video of the yard in the mid 90's. i have video not too different than what you have here. only difference is that i have video from the hump tower. they had at that time let me up into the tower. the video i have is on VHS and i am needing to transfer the video from VHS to computer format. i returned to northtown yard a couple years ago and i love the fact that one of the managers in the diesel shop recognized me and remembered me. oh and i have a lifetime memory of the engineers who let me behind the throttle of an SD-40-2 a memory i will always love.
Wow! What great memories! I bet that was really fun. And I'm sure back then, they didn't have any rules that you could record the workers working on the locomotives. We weren't as fortunate. It' be great if you could get that converted. We can do that for you if you wish.
Thank you! Yes, it sure was! It was a group tour with special permission from the RR. We weren't allowed to tour as the crews were working on the locomotives, but moving them in and out only.
I live in MN. I guess I never did not know there was a yard up there in Fridley. I sure like see the old green paint jobs still on some of those units.
Been through North Town a few times years ago . SooLine Train 376 From Humbolt Yard around the loop at Shoreham then through North Town up to Superior Wisc. To Stinson Yard . After they abandoned the Line From Thief River Falls to Superior ... They had to bring the trains all the way down to Humbolt yd. off the Paynesville sub than right back up north to Superior . .Stayed at Barkers Island i believe it was .
Barkers Island was the place! From what we recall, it was actually a decent place to stay. As long as the Hinckley Sub isn’t full of slow orders, it’s a pretty decent trip. Running through the yard at Northtown took some time. But so did shoving out (or shoving in) at University…
8:58 I remember running this old BN SD-60 8110 as a helper out of Glendive to shove coal unit trains over the hill near Medora, maybe it was Sentinel Butte. I really can't remember where the hill was or where we cut off, I just know we cut off east of Medora (maybe it was South Heart). We would often stop light in Medora and jump off to go into the gas station near the tracks for a quick bite. It's crazy to think that back in 2014 I was loaned out to Glendive and had enough seniority to hold the helper pool with only 1 year on the railroad, albeit I only held it for a few weeks at a time and then back to the Conductors extra board where I would be at or near the top. I really enjoyed my time in Glendive because BNSF paid for me to live at the Astoria Hotel for nearly 2 years while I held down great jobs. The only job I couldn't hold was the Sidney Local except in the coldest months of winter. That was a great job, because we would typically work for 2-3 hours spotting cars and got paid for 12. It was fun and the trainmaster up there was a really good guy who never tried to fire anyone. I want to say that I used that same unit BN 8110 on the Glendive local to shove these really heavy drilling sand cars up this steep hill on the Sidney Sub to some operation called Baker (I think) which would load the sand into these giant bags for truck shipment. Sometimes it was like 5 cars, which a GP could handle, but other times we had like 15-20 cars and the only way to get them up the hill in one shot was to use two road power units. There was a trainmaster out of Glendive who would camp up there to mess with train crews as we were trying to spot cars on this spur. Life on the railroad, someone is always trying to fire you... I mean we probably deserved it because when nobody was looking, we would put the loads and engines on top of the hill past the switch and ride the empties down so that we would not have to shove back to CHS where we could run around the cut. This maneuver was a bit hokey as someone would ride the point and use the hand brake to adjust the speed. We would tie 3-4 cars just tight enough to keep the cut rolling slow and that final brake was used to bring the cut to a stop after the crossing where the brakeman would be to stop traffic. It's a wonder I survived as long as I did on the railroad...
What an incredible story! These are the things we love to hear. We read every word, and enjoyed hearing about your adventures. 2012-2014 was a busy time out in the Glendive area! Coal, oil, sand, grain, construction materials, and much more kept the railroad extremely active during this time. And we’re sure that there was plenty of money to be made! If only we could go back to experience it again… Thank you for sharing.
That would be on my "BUCKET LIST" of things to do! How cool that would be to tour the shop while the locomotives were being serviced etc! And I'm also wondering if the BNSF locomotive was equipped with remote technology with seeing the blinking lights over the cab.
Yes the switch engine working on the top there on the lead is remote. The motors moving in and out of the house are controlled by the guys working the house.
That is correct. Locomotives communicate through cables connected between the units known as “MU” (multiple unit) cables. If they are further apart but still on the same train, locomotives can communicate remotely via digital radio data bursts (Distributed Power). If there are engineers aboard each set of locomotives (helper or pusher locomotives), direct voice communication via radio can be employed.
I wish I was there I would have enjoyed watching those I was there I would have enjoyed it job well done to the people that that produced this video I give the people A+ job well done
Roger that. And yes, Minnesota can get chilly in the winter! Those locomotives would probably prefer to be inside as well. As for the L&N, that really was a neat railroad. Thank you for sharing and commenting.
had 3443 switcher when i was in kansas for college to get my conductor certificate that thing leaked oil like crazy , ended up shutting down on us the second day we were in lenexa yard training
Older locomotives are required to be inspected every 92 days for what is known as a periodic inspection. Locomotives with advanced microprocessor-based locomotive monitoring systems require their periodic inspections every 184 days. Routine maintenance is often performed during these inspections. In addition, locomotives are required to receive an inspection by a “qualified mechanical inspector” at least once every 33 days. Finally, each day a locomotive is in use, it must receive a “daily inspection” performed by a qualified employee. That qualified employee is most often a locomotive engineer. From there, any other scheduled maintenance or overhaul would be at the operating railroad’s discretion. Thank you for your inquiry.
Thank you!!! We’re glad that you enjoyed the video. You’re on the right track with your ambitions. Shops like this one provide fairly steady work, along with decent working conditions. Do you happen to know which railroad your grandfather worked for?
Thank you Leaf! Not sure if that will ever work in today's world. This was a special invite set up by some people we knew who knew the people at Northtown. Thanks for watching!
this is a facility not accessible by the general public - ok, now what specifically could we see that we could not see somewhere in "the open" - expected to see how they take a diesel apart, then see mechanics work on the frame, motors etc, finally reassemble
Thanks for asking Franz. This was a unique situation where we were granted special access to see the inside of the building. Due to union laws and such, we were not allowed in the building during working time for safety reasons. I hope you understand. It was pretty rare that we got to go in at all, let alone during work time.
I have to wonder why they don't repair horns in there because so many horns have interchangeable parts. I feel like that would just be a waste of money to replace it with an all new horn.
Thank you for your comment A-Borgia. I'm sorry you feel this way. This is all we were offered by the railroad. There were no crews working on the locomotives at the time because they didn't want anybody roaming around while doing work for safety reasons. Therefore we concentrated on things happening around the facility, while getting to take a look at what we could see inside. Many parts were off limits for us to see. I hope you understand.
This was amazing to see.i like to make a video there.wel i live in the Netherlands.lol. but when everiting is normal,no covid 19 i wil came over,and visit it with mine old friend Jaw Tooth.Brian. greetz:Peer,stay sava all.
My grandfather was a machinist in the L&N Corbin, KY roundhouse beginning in the 1920’s up to about 1960. I was about 9 years old when he took me there and I got to see lots of steam locomotives in various stages of repair, and even a few diesels. That was the shop that took care of the motive power for the coal fields of Eastern Kentucky, and later they built a big coal washing facility in the yards to clean all the coal as it came out of the mines. Corbin still has quite a bit of activity for CSX now, but the old roundhouse is long gone, just memories. My grandfather walked two miles to work and back every day, then worked in his huge garden, a real man, but quiet. His car was to drive to the grocery store on Saturday and church on Sunday. He also served in the Navy around 1915 and was in Vera Cruz in the Mexican Revolution, but got out before WWI.
Many great memories have been shared on this video, and this is another! Thank you so much for sharing your story. Very interesting indeed!!!
I worked in a locomotive back shop. It's an experience that will forever stay with you.
I bet! Thank you for sharing!
I like how bright it is... gotta see what you're doing for starters
For sure! Very well lit. Thank you for watching!
My Grandad was a Steam Loco mechanic for the Pennsylvania RR
at their Indianapolis shop. My Dad hired on there too after he came
home from WW2. Dad was a machinist. When the Diesels came in
Grandad couldn't or wouldn't learn the new tech so he quit & started
his own business doing steam boiler repair.
!
Awesome! Great story. Thank you for sharing!
The rock island railroad had a huge diesel shop in silvis Illinois. The rock was one of my favorite railroads, they were long gone before my time.
That would have been a great shop to visit. Thank you for watching!!!
I drove truck for a common carrier making deliveries/pickup's to the Northtown yard.
What an amazing place with great shipping/recieving personal.
Just getting from the street into the area of the shop/shipping & receiving/under the hump
tower to the signal shop was always quite the experience!
Thank you for sharing your story, Dominic. Never a dull moment at Northtown!
I worked in a diesel house for over 30 years seeing this really makes me miss it
Me too. I served my machinist apprenticeship with the old NS and later with the NW/NS in Roanoke, Va. Also worked the NS Shaffers Crossing facility that is very similar to the BNSF shop in the video. There I worked in the material management dept. keeping supplies available for shop workers. That facility started operation in 85. I helped set up the MM dept before it opened to locomotive repair and inspections. Yeah, I miss it and other jobs I had on NS. The last job I had for over 6 years was control station operator. That was a good job too and I miss that one also. The only drawback to that job was I worked every weekend during the time I held a regular job there and I got kinda tired of that when thinking about people going out Friday or Saturday evenings to dinner etc. while I had to work but overall I really liked the locomotive shops and the operators jobs.
I bet it was a great place to be. Thank you for the comment!
How do you get hired?
@@demurevilleneuvewinslet8235 apply
I worked at Northtown Diesel Shop for 20 years along with extended sojourns in Alliance Nebraska and Gillette Wyoming. Enjoyed the work and the people I worked with. Nice video of my second ‘home.’ This video must have filmed on midnights.
Awesome production. Super clean work area.
Switched railcars in an aggregate load out operation in South Florida. Learned to respect the power of rail operations.
Thanks for sharing!
Thank you very much! And yes, BNSF does an excellent job of maintaining their facilities. We appreciate the comment.
Nice to see a Ex-BN SW1500 still running strong in yard service. Nice catches
Thank you so much! It was a great time!
We still have 2 in service at our yard. Best sounding locomotives
Also ex-GN
I wonder why it has a mechanical bell, and a electronic bell.-.
thanks for posting this as a retired dispatcher I knew this place and saw lot of power out of there.
Very cool! Assuming you worked for the BN? We have a current CPKC dispatcher here at C. Vision.
i DID HAVING been at Northtown as well as in Montana before being moved to Texas.
@@CVisionProductions1
Those moves are never easy. CPKC is about to move all of their US dispatchers to Kansas City. Would we have heard you dispatching lines in Minnesota? Maybe we would recognize your initials?
I once got a back haul of locomotive engine oil that I delivered to a Kansas railway maintenance facility and I found it very fascinating. I asked someone there how much oil goes into one of those locomotives and he said 400 gallons and that unless the oil became contaminated with water or something it would be in the engine for the life of the locomotive. I also saw some of those traction motors and was impressed with the seemingly small size of them compared to the size of the locomotive the power and incredible amount of torque they must have to pull a train.
Wow! That's a lot of oil! I had no idea. Thank you for sharing!
I think they even forgo antifreeze so can save the oil even if it does become contaminated. They can simply skim or boil the water off
I'm amazed at the fact the oil never needs changed unless it becomes contaminated
@@Whoflungpouu I was amazed too but I was also amazed that the engine took 400 gallons of oil. Think about it, thats almost eight 55 gallon barrels of oil.
Pure crude oil if you get good quality & put in a vehicle motor it will never break down and need changed
Cool to see still old BN green locomotives still in use just patched with new BNSF numbers.
Good ol Burlington Northern.
It was a great time when we were there. Not too much BN green left around here anymore. Just a few. Thank you!
Yes it's nice. Pity that BNSF didn't adopt the green and black color scheme rather than the black and pumpkin they use now. At least the BN scheme was distinctive not like now where at a glance you can mix up a UP and BNSF train especially if they're dirty
I grew up in Fridley. Always fascinated with trains. Thanks for the video.
Glad you enjoyed it
Terrific video! Thanks for posting. All the shop guys work hard to keep our freight moving to consumers like me.
Couldn't agree more! Thank you for watching!
I will like to visit at bnsf
I worked in the SP yard in Sacramento California just before they shut down. It was a great experience and the co workers were awesome.
Thanks for sharing!!!!
Amazing video Love seeing BNSF locomotives in the Yard and those SD70MACs
Thank you very much!
Impressive display of power. Thank you
You're welcome! And thank you!
I never got into trains until I was older now I love watching them 😁😂
Same here! I've always thought they were neat but really, really got into them over the past year.
One is never too old to enjoy new hobbies! Thank you for posting!
People that work or employed there were all fascinated with trains since childhood. Its in thier genetics or blood. Family members probably work there too and they all love that line of work. I lived by train tracks when I was young would go out of my way to watch every train as they went by our house. I didn't miss a car. I loved it when then stopped at the foundry nearby and hit the brakes. You could hear every car go boom boom boom right down the line of cars. Even at 2 am I would listen for them.
You very correct Daryl. Thank you for sharing!
I was a locomotive electrician for 12 years. Very few of us enjoyed the work. It’s very dirty work, very complicated at times and you are continually under time pressure. Just being honest.
I can completely understand. It is great seeing this from a railfan perspective, but I can agree it is different from some who has worked in this environment's perspective. Thank you for sharing!
Very Nice! Brought back memories from when I was a hostler there back in 97-98
Thanks Rob!
Very cool, reminds me of back in early 2000's when I got to go in the Columbus CSX intermodal facility and in NS Buckeye yard before it closed.
Thank you!
Que registro mais espetacular, uma maravilha para quem ama ferroviaria, vários modelos de locomotivas um verdadeiro show de imagens like garantido 👏💯
Thank you very much. We’re very glad that you enjoyed the video. Greetings from the United States!
That was amazing! Thank you for sharing that with us! I think this should be added to library of Congress!
Glad you enjoyed it!
Very cool opportunity, could spend all night and day there!!
Thank you! That's what we thought when we were there!
This was one of the first places i went when i received my drivers license in the mid 90's. i had an after school art magnet video productions class. i was working on a video of different classes of locomotives and what they do (e.g., SW1500 is for swtiching etc.) i have some old video of the yard in the mid 90's. i have video not too different than what you have here. only difference is that i have video from the hump tower. they had at that time let me up into the tower. the video i have is on VHS and i am needing to transfer the video from VHS to computer format. i returned to northtown yard a couple years ago and i love the fact that one of the managers in the diesel shop recognized me and remembered me. oh and i have a lifetime memory of the engineers who let me behind the throttle of an SD-40-2 a memory i will always love.
Wow! What great memories! I bet that was really fun. And I'm sure back then, they didn't have any rules that you could record the workers working on the locomotives. We weren't as fortunate. It' be great if you could get that converted. We can do that for you if you wish.
wow so many old engines just drove by their today and still see b40-8w in sante fe paint
Northtown is a great place to see classic locomotives. And it’s been that way for a very long time. Always worth a visit! Thanks for the comment.
@@CVisionProductions1 thanks for showing us this
You’re very welcome! Thanks for watching.
Oh man, getting to go in there is a dream come true
Oh, hey Ryan!
How were they allowed in
Probably permission from BNSF
Thank you! Yes, it sure was! It was a group tour with special permission from the RR. We weren't allowed to tour as the crews were working on the locomotives, but moving them in and out only.
Wow, great video! I've only seen the shops from the 44th Ave Bridge. Thanks for sharing this.
Thanks for watching!
Wow that's crazy, how cool it is to see a BNSF shop, never seen it before
Lots of old power here for sure and lots of it is probably still used today. Anyway big fan of your channel.
@CraftyFoxe Hi
Yep
Thank you for watching!
Thank you!!!!
Enjoyable upload, C Vision Productions, of behind the scenes night shift in the BNSF yard. All types of good, hard working union jobs.
Thank you so much for watching!
I live in MN. I guess I never did not know there was a yard up there in Fridley. I sure like see the old green paint jobs still on some of those units.
Well, it is technically in both Fridley and Minneapolis. But most will refer to Northtown as being in Minneapolis. Thank you for writing!
Reminds me of what I used to go down to the 13th Street Station at Mopac in St Louis and work on the EMD 45s
I bet that was neat!!! Thank you for sharing!
I really like the color scheme of old BN locomotives 😅
Me too. It was classic
Been through North Town a few times years ago . SooLine Train 376 From Humbolt Yard around the loop at Shoreham then through North Town up to Superior Wisc. To Stinson Yard . After they abandoned the Line From Thief River Falls to Superior ... They had to bring the trains all the way down to Humbolt yd. off the Paynesville sub than right back up north to Superior . .Stayed at Barkers Island i believe it was .
Barkers Island was the place! From what we recall, it was actually a decent place to stay. As long as the Hinckley Sub isn’t full of slow orders, it’s a pretty decent trip. Running through the yard at Northtown took some time. But so did shoving out (or shoving in) at University…
Love those MACs!
Me too! Sure wish they were all being used still.
My one and only visit to Northtown,,,I saw GP20s,SD9s,U25Bs, and F7s. (among others) 1978
That must have been a great time! Those were the days!!!
8:58 I remember running this old BN SD-60 8110 as a helper out of Glendive to shove coal unit trains over the hill near Medora, maybe it was Sentinel Butte. I really can't remember where the hill was or where we cut off, I just know we cut off east of Medora (maybe it was South Heart). We would often stop light in Medora and jump off to go into the gas station near the tracks for a quick bite. It's crazy to think that back in 2014 I was loaned out to Glendive and had enough seniority to hold the helper pool with only 1 year on the railroad, albeit I only held it for a few weeks at a time and then back to the Conductors extra board where I would be at or near the top. I really enjoyed my time in Glendive because BNSF paid for me to live at the Astoria Hotel for nearly 2 years while I held down great jobs. The only job I couldn't hold was the Sidney Local except in the coldest months of winter. That was a great job, because we would typically work for 2-3 hours spotting cars and got paid for 12. It was fun and the trainmaster up there was a really good guy who never tried to fire anyone.
I want to say that I used that same unit BN 8110 on the Glendive local to shove these really heavy drilling sand cars up this steep hill on the Sidney Sub to some operation called Baker (I think) which would load the sand into these giant bags for truck shipment. Sometimes it was like 5 cars, which a GP could handle, but other times we had like 15-20 cars and the only way to get them up the hill in one shot was to use two road power units. There was a trainmaster out of Glendive who would camp up there to mess with train crews as we were trying to spot cars on this spur. Life on the railroad, someone is always trying to fire you... I mean we probably deserved it because when nobody was looking, we would put the loads and engines on top of the hill past the switch and ride the empties down so that we would not have to shove back to CHS where we could run around the cut. This maneuver was a bit hokey as someone would ride the point and use the hand brake to adjust the speed. We would tie 3-4 cars just tight enough to keep the cut rolling slow and that final brake was used to bring the cut to a stop after the crossing where the brakeman would be to stop traffic.
It's a wonder I survived as long as I did on the railroad...
What an incredible story! These are the things we love to hear. We read every word, and enjoyed hearing about your adventures. 2012-2014 was a busy time out in the Glendive area! Coal, oil, sand, grain, construction materials, and much more kept the railroad extremely active during this time. And we’re sure that there was plenty of money to be made! If only we could go back to experience it again… Thank you for sharing.
0:22 Man that sounds the default "neuter" engine in Trainz.
How can 18 people not like this? I would love to work there.
Because some people are knuckleheads. Remember Adam and Eve weren´t satisfied in the Garden of Eden so some people can never be happy.
@@benniepierce6283 Well, as of tonight, 34 people are knuckleheads!
Yipe, being able to see inside these facilities, and engage with those involved working there, would be hugely on the top of my bucket list.
Thank you Dene! It was a good time!
Thank you for your comments. I guess you can't please everybody. But thank you for liking it!
That would be on my "BUCKET LIST" of things to do! How cool that would be to tour the shop while the locomotives were being serviced etc! And I'm also wondering if the BNSF locomotive was equipped with remote technology with seeing the blinking lights over the cab.
Yes the switch engine working on the top there on the lead is remote. The motors moving in and out of the house are controlled by the guys working the house.
It was neat to see the shops. But I agree it would be neat to see the work. Unfortunately, we weren't allowed to record while they were working.
My logistics class scored a tour of this facility in 1990. It was so dark in there it was spooky but the railroad was very gracious.
Very nice!!! At a time of all BN!!!
AWESOME!!! LOVE BNSF!! #1 Train line that never ever had problems! Runs through our town in the port of Vancouver Washington
Thank you!
BNFS Bello magnífico parabéns
They sure are. Wish they were mostly still around.
Great video! I have been inside there once. Its a great shop way nicer then our shop was (CP ST.paul)
Thank you Jason!
Interesting how a shunter loco can pull & push a road service loco with ease
Indeed! Thank you for watching!!!
They can push and pull a string of 30 cars !
(1,500hp)
Love the ol green BNs 😎
Me too! Wish there were more of them still around.
I assume that all engines involved in a train communicate with each other..
That is correct. Locomotives communicate through cables connected between the units known as “MU” (multiple unit) cables. If they are further apart but still on the same train, locomotives can communicate remotely via digital radio data bursts (Distributed Power). If there are engineers aboard each set of locomotives (helper or pusher locomotives), direct voice communication via radio can be employed.
@@CVisionProductions1 thank you sir.
You’re very welcome.
I wish I was there I would have enjoyed watching those I was there I would have enjoyed it job well done to the people that that produced this video I give the people A+ job well done
Thank you so much Albert!
Ahhhhh... The sound of idling EMD locomotives😌
It really is a nice sound. Thanks for watching!
Awesome video.. nice EMD’s
Thank you Cameron!
Very nice video! Do they repaint units there?
Thank you! Northtown can touch up paint after repairs are made, but full repaints are completed elsewhere.
I like to know that the sd70macs are still around
There are still some, but most are still being stored in Wyoming and Nebraska.
EMD is still holding up
Let's hope that continues!
@ timestamp 10:38 that is an ex-IAIS ex- RI Geep:)
Yes, it is. Thanks for noticing!
Can't imagine working outdoors riptrack. We had 4 door building with no doors at the L&N Howell Yard at Evansville IN. That could get cold in winter.
Roger that. And yes, Minnesota can get chilly in the winter! Those locomotives would probably prefer to be inside as well. As for the L&N, that really was a neat railroad. Thank you for sharing and commenting.
I LOVE ALL THAT GREEN!!!
It was great while it lasted! Thank you for the comments!
Great video thank you ❤
You’re very welcome! Thank you for watching.
Look at all that rare power!!
Yes! There was plenty of that cool power in use back when this footage was captured. Thank you for watching.
had 3443 switcher when i was in kansas for college to get my conductor certificate that thing leaked oil like crazy , ended up shutting down on us the second day we were in lenexa yard training
Wow! No kidding! Thank you for sharing!
i’d love to know the maintenance schedule for a locomotive.
Older locomotives are required to be inspected every 92 days for what is known as a periodic inspection. Locomotives with advanced microprocessor-based locomotive monitoring systems require their periodic inspections every 184 days. Routine maintenance is often performed during these inspections. In addition, locomotives are required to receive an inspection by a “qualified mechanical inspector” at least once every 33 days. Finally, each day a locomotive is in use, it must receive a “daily inspection” performed by a qualified employee. That qualified employee is most often a locomotive engineer. From there, any other scheduled maintenance or overhaul would be at the operating railroad’s discretion. Thank you for your inquiry.
@@CVisionProductions1 Thank you for the info.
You’re welcome.
Wow this is so cool!! Man I’d like to work at a shop like this one day! My grandfather was a conductor and drove trains.
Thank you!!! We’re glad that you enjoyed the video. You’re on the right track with your ambitions. Shops like this one provide fairly steady work, along with decent working conditions. Do you happen to know which railroad your grandfather worked for?
@@CVisionProductions1 no I don’t
Alright, no worries. Thanks again for watching!
And also i want to see GE B40-8W
damn, real nice, amazing. Would it be possible to see whats going on in Norfolk Southern's shop(s)?
Thank you Leaf! Not sure if that will ever work in today's world. This was a special invite set up by some people we knew who knew the people at Northtown. Thanks for watching!
Thank you for the Tour.
You're welcome! Thank you for watching!!!
Nice, but I want to see them doing stuff in there. Replacing traction motors and so on.
You and me both! But with Union rules, we weren't allowed to film during the work.
Thanks for watching!
I enjoyed this video very much thank you
Glad you enjoyed it! Thanks for watching!
this is a facility not accessible by the general public - ok, now what specifically could we see that we could not see somewhere in "the open" - expected to see how they take a diesel apart, then see mechanics work on the frame, motors etc, finally reassemble
Thanks for asking Franz. This was a unique situation where we were granted special access to see the inside of the building. Due to union laws and such, we were not allowed in the building during working time for safety reasons. I hope you understand. It was pretty rare that we got to go in at all, let alone during work time.
A BNSF SW1200 still running! 3:40
As far as I know, it only ran for a short time after we shot this video.
@@CVisionProductions1 Oh.. :(
My Dad worked 47 years for P&LE
That is dedication! Thanks for sharing!
I love switchers nice catches
Thank you Kelvin!
Good video, thanks for sharing!
Thank you Theo!
oh i want to see sd70mac
They are a great locomotive!
That’s not far from where I live and I have a friend that works there!
Excellent Enterprising Endeavour 🎉🙏
Many thanks!
Now that’s awesome I love see it to
Thank you Taylor!
@@CVisionProductions1 your welcome come Pacific Northwest it’s busy
C vision productions nice train dvd
Thank you Chris!
I have to wonder why they don't repair horns in there because so many horns have interchangeable parts. I feel like that would just be a waste of money to replace it with an all new horn.
Not sure why. Good question.
Thanks our economy is very strong
Thank you!
Is there a DVD that has this?, My father is a train fan and I think he would like this. If so, I will order it on-line
Hi Tigermark64. Thank you for asking. Yes it is. Here is the link.
cvptrains.com/store/Minnesota-Train-Action-Volume-7-p19541305
Awesome!!!!
Thanks!!
What an awsome video. 👍
Thank you! 👍
Nice video thank you 🙏 I
You're very welcome Rick. Thank you for watching!!!
Best video I always want to see the service facility I doing a ho scale
Thank you Regis!
no tour of the shop at all. Only a switchter pushing/pulling locomotive in/out of the shop.
Thank you for your comment A-Borgia. I'm sorry you feel this way. This is all we were offered by the railroad. There were no crews working on the locomotives at the time because they didn't want anybody roaming around while doing work for safety reasons. Therefore we concentrated on things happening around the facility, while getting to take a look at what we could see inside. Many parts were off limits for us to see. I hope you understand.
great video
thanks
Thank you Peter!!!
How many gallons of fuel do those tanks hold and how far can they go on a full tank?
Hi Diego. Some can hold up to 4000 gallons. Not sure on the mileage. Thank you for asking!
@@CVisionProductions1 I would hate to be the one paying for that many gallons of fuel.
C Vision Productions how many trains go through Edgemont South Dakota a day?
Roughly around 20-30. Down from its peak of 60-80 years ago. Thank you!
that was cool
Thank you!
No problem
This is soooooooo sick!!!!!!!!
Thank you!
Veramente eccezionale questo video con le manovre di quellelpvomotive
Gracias!!!
I wonder if 'Golden Globe' is still in use at Northtown?
Not sure what that is.
@@CVisionProductions1 It's the switcher with the Golden Globe hood ornament. See 3:19.
Love to work there
It would be fun for sure!
Very interesting..
Thank you for watching!
@@CVisionProductions1 i live in Minneapolis i also live by the yard how did they let you in
@S Axtman We were in a special tour group. It was arranged ahead of time with the railroad.
Do they have pipefitters there??
Sorry, I really don’t know. But thank you for asking!
I’m glad that BNSF is lousy with repainting.
Me too, but they are painting more lately.
AWESOME!
Thank you!!!
@@CVisionProductions1 your most welcome! Love the older power!
very cool
Thank you Phillip!
@@CVisionProductions1 your welcome
Great video! What type of camera did you use to record this video? It has outstanding quality!
Thank you! Back then, it was a Sony PMW-100 I think.
This was amazing to see.i like to make a video there.wel i live in the Netherlands.lol. but when everiting is normal,no covid 19 i wil came over,and visit it with mine old friend Jaw Tooth.Brian. greetz:Peer,stay sava all.
But wait....there's more!
Thank you! Let's hope you can come back soon!
@@richardsylvanus2717 😅so as useal it is./zoals gewoonlijk er is. NL.🤣greetz:🍐:Peer.
I love it!
Thank you Jason!