I have this exact antenna hanging in an upstairs window in my house on a heavy duty suction cup hook. It works great! It replaced a Channel Master Flatenna which worked pretty well but didn't have the long VHF element needed to pick up everything. Now I get the local NBC, CBS, FOX, and ABC (which is the one Flatenna struggled with). Plus I get several others including MeTV and Antenna TV (my 2 favorites). Everything is clear with no signal drop or pixelation. With a decent amount of trees in my area, I am very impressed. I have it running into an Air TV Anywhere so I can watch these free channels on my phone via the Sling app.
i have this antenna and my towers are 30-50 miles away. i had to put this on a 15' pole and then face the back of the antenna towards the towers instead of the front. it gets better reception that way for some reason. i wanted to mention this in case you were having issues and want to get better reception and/or more channels.
Thank you for leaving a comment. It really depends on your location and where the towers are located. Along with other factors such as terrain and other obstacles between your home and the towers. What you experienced wouldn't necessarily happen for everyone, but it's always great to provide your experience, just in case. We appreciate you!!
Truth and Quality. Practical and Useful Information. Don't mean to be picky. Mounting antenna down slope on the roof , below the highest point of the roof and mounting antenna with out regard to location is not a good picture to show to people. Reason: Many people are sloppy and just stick the antenna anywhere. When they see the same in pictures then they think is Ok to just stick em up in a haphazard manner and in poor to bad locations. No thinking required , just stick em anywhere.
I don't have this Antenna , but i have 2 other ClearStream Antennas , that i use indoors , i am very happy with these Antennas from Clear stream one is 2MAX very good , and i got another which it maybe a close out , i got from a closeout retail store , this company has got my maybe future business , if i should need another TV Antenna .
They definitely got the magic sauce for TV antennas. :D The only suggestion I have for the company, is if they use an amplifier/booster on certain models, to mount it at the back of the antenna, instead at the end of the cable which plugs into the TV. The reason for this, is to pre-amplify the clean signal coming out of the antenna without any signal loss introduced by the long cable. In other words, it's best to pre-amplify the signal before sending it down the cable than the other way around. The only downside is that they have to include a power injector for the the coax cable to power the amplifier/booster at the back of the antenna, but the results are well worth it.
How do I know if this antenna will work inside of my apartment unit? I live in Ohio, and I want to know how many channels would I receive with the antenna.
Hi Sara, please call our support team at 877-825-5572 or chat with a rep online at antennasdirect.com and they will perform a free signal analysis in your area to make an antenna recommendation based on your location. If you want to check the number of channels available in your area , click this link and enter your zip code www.antennasdirect.com/transmitter-locator.html. Scroll down to see the number of channels available to you.
How do I get the sound to play on my Klipsch Bluetooth wireless speakers? Other Ports for Roku & Firestick work great for sound. Looks like I’m going to have to return and purchase from another company that sells Antennas, that connect to wireless speakers.
@@christinehand2687 although it is a Toshiba, smart TV, it is 10 years old. When I purchased the klipsch speakers & subwoofer, I never found a menu option under sound for Bluetooth connecting
Hi Timothy! We build our products with premium, durable materials and have several techniques built within the antenna to specifically prevent corrosion and moisture issues. We also back our products with a lifetime warranty on all parts, so if for some reason there ever is an issue, we will make it right for you with no problems. If you would like a more thorough explanation, give one of our experts a call at 877-825-5572. They are available 7 days a week to help!
I use two command hooks to attach my antenna to the wall. The antenna is light weight and I can always move it without worrying about what’s behind the wall when drilling.
Great idea, will definitely give a try. In my condo, I'm not allowed to mount the antenna outdoors, so after a lot of trial and error, I found that mounting the antenna touching the ceiling above the in-window air conditioner unit, it provides the best signal on all the channels. Interestingly the metal air conditioning unit is likely affecting the signal positively, because if I mount it anywhere else, I can only get about half the channels. It might be acting as a ground plane, concentrating the signal more. Thought I share this little tip.
Hello, we are here! Call 877-825-5572 for support M-F from 9am to 7pm CST. I'm not sure if there was an issue with the phone lines during the winter storm last night. Sorry for the inconvenience. Give us a call today!
@@ADirect good. That's what I want. My current antenna needs the amplifier box so when a storm knocks over our, the antenna won't work. This one should work with a portable tv
Is the Max-V much different than the 2-Max? I am looking for a more reliable indoor antenna than what I have. I am within 20 miles of most of the towers I want near Green Bay. My current one made by Amazon is one of those flat antennas. I can get most of the channels, but sometimes I lose signal. I keep seeing the 2-Max as one of the most reliable indoor antennas and now I see you have the Max-V. The VHF signals like Fox and CW seem to be the biggest challenge. I use it with Tablo and then I can DVR the channels and watch on any TV in the house.
Hi T.J., The MAX-V is the same antenna as the 2MAX. There are limited installation components, so you only buy what you need for your antenna setup. Meaning, the antenna comes with a wall bracket and adjustable mounting hardware for a mast - you would need to purchase a mast, coaxial cable, and if you would like to use the antenna indoors, we have a base stand that is sold separately as well. We love Tablo! Here are links to pages to help you: ClearStream MAX-V antenna store.antennasdirect.com/clearstream-max-v-uhf-vhf-indoor-outdoor-hdtv-antenna.html Masts and indoor base stand: store.antennasdirect.com/antenna-mounts.html Coaxial cable: store.antennasdirect.com/coaxial-cable.html We can also perform a free signal analysis at your location, so you can be sure you are purchasing the right antenna. VHF signals will depend on distance to the towers and also the frequency it is broadcasting- might be low-VHF and not Hi-VHF. We can determine this for you. Our tech support is the best in the business! It should only take about 10 mins for the analysis. We are available 7 days a week at 877-825-5572.
@@AntennasDirect Thanks, that's very helpful. It looks like Fox, CBS, and ABC are all Hi-V when I use an online tool. Everything else is UHF. I'll take a look at the supplies I need, I may have the right coaxial cable. Then I'll probably be getting this antenna.
They definitely make great antennas. The only suggestion I have for the company, is if they use an amplifier/booster on certain models, to mount it at the back of the antenna, instead at the end of the cable which plugs into the TV. The reason for this, is to pre-amplify the clean signal coming out of the antenna without any signal loss introduced by the long cable. In other words, it's best to pre-amplify the signal before sending it down the cable than the other way around. The only downside is that they have to include a power injector for the the coax cable to power the amplifier/booster at the back of the antenna, but the results are well worth it.
Hi Bill, We do not preamplify our antennas. The main reason is that there are those antenna users who don't need preamplification, so there is no reason to add additional cost to users that may or may not need it. If preamplification is needed, we sell preamplifiers separately and also provide an illustration that shows the proper installation. Thank you for your feedback and leaving a comment on our page. Much appreciated!
@@ADirect < I guess what I was trying to suggest, is that in case an amplifier is used (factory or user supplied), it's best to boost the signal right at the base of the antenna, rather at the TV set. The reason for this, is to amplify the clean signal coming out directly from the antenna without a signal loss induced by a relatively long coax cable. In other words, it's best to amplify the signal before sending it down the cable rather than at the TV set. The only downside is that they have use a power injector through the the coax cable to power the amplifier/booster, but the clean and strong signal is worth it.
Hi Casey, what is most important is that the elements are tuned to receive the right frequencies in North America and this is why we hold a patent on our element designs. Whether you decide to use an Antennas Direct loop or a bowtie antennas, you will receive great performance.
@@AntennasDirect I dropped my 4 disc ClearStream antenna 3 ft onto a hard carpet floor will that damage any of the internals on my antenna? I don't watch a lot of TV because most of the TV signals coming from the Seattle TV stations are mind control programming to deceive the masses.
@@unitedstatesirie7431 No damage should occur with the antenna. ClearStream antennas are so robust, the can withstand 70+ mph winds. Thank you for sending us a message.
Can this be installed upside down? I assume yes, but might as well ask. I have a good indoor spot in a roof peak for this but only if the VHF mast is at the bottom.
Hi Casey, yes you can hang the antenna upside down. Please make sure there are no obstructions between your roof peak and the towers before installing the antenna. You will want to test that area when you plan to install by temporarily positioning the antenna in the roof peak and run a cable to your TV and scan for channels. TV signals can be a little tricky at times, so you always want to make sure you test the area first before permanently installing the antenna.
I just installed your ClearStream MAX-V antenna for a friend based on the recommendation of the "Antenna Man" on RUclips. It seems to be working OK. Technical question: The VHF element is a single piece of aluminum covered with a black coating. Since it's a single piece, it doesn't appear to be a typical dipole. Can you tell me how the VHF element works, and how it is RF coupled to the feed point, since there is no electrical hookup. Thanks, Bob
Hi there, I think almost all TV models are a little different, but here is the general idea of how to get to menu to add a channel... under settings, select preferences, select channels, select antenna, and there should be a setting that says "add digital channels". If you cannot find this, please call our support team at 877-825-5572 and give them the TV model and they will look it up for you. Thanks!
Hi Genia, we are here to help you! Please call us at 877-825-5572 and support will walk you through the app so you can aim your antenna. Thank you for leaving a message.
Hi Genia, you can give our customer service a call at 877-825-5572. They can perform a free signal analysis for your location and help you locate the best place to install your antenna.
Hi Brenda, Once you connect your digital converter box to your television, you may need to set your television to channel 3 or 4 or possibly to an input setting specific to using video input or the S-video input on your television, such as “Video 1” or something similar. You will need to look at the converter box instructions. Once everything is connected and both converter box and TV are turned on set the TV in the menu to the correct channel or input, the digital TV menu should appear. You will then need to perform a “channel search” or "channel scan". If the channel search process doesn’t find any channels, your antenna is in a place where the signals are coming from the towers so you will need to move the antenna to antenna location and perform the channel search again. If you are still not receiving TV channels, please call our support line at 877-825-5572 and speak to a rep. They can check your location and see if there are obstructions, like tall trees or buildings blocking the signals and advise your where the antenna needs to be placed in order to receive TV signals. Thank you for sending us a note.
Antennas like this aren't good for low vhf channels (RF 2 - 6). The horizontal elements have to be longer, like the old rabbit ears. The FCC has moved some channels to this area.
Epiphoney, to receive low VHF channels (RF 2 - 6) you would need horizontal elements that are approx 10 feet long, so old rabbit ears will not receive these low frequencies. Our elements have been known to pick up the high end of low VHF at a very short-range, but the environmental circumstances need to be perfect.
@@AntennasDirect I can receive NYC RF 3 from 20 miles away in NJ with rabbit ears but not with the max-v. That is my experience. I do have to go outside my window.
I have this exact antenna hanging in an upstairs window in my house on a heavy duty suction cup hook. It works great! It replaced a Channel Master Flatenna which worked pretty well but didn't have the long VHF element needed to pick up everything. Now I get the local NBC, CBS, FOX, and ABC (which is the one Flatenna struggled with). Plus I get several others including MeTV and Antenna TV (my 2 favorites). Everything is clear with no signal drop or pixelation. With a decent amount of trees in my area, I am very impressed. I have it running into an Air TV Anywhere so I can watch these free channels on my phone via the Sling app.
This is awesome! We're so glad to hear it, thanks for sharing!
i have this antenna and my towers are 30-50 miles away. i had to put this on a 15' pole and then face the back of the antenna towards the towers instead of the front. it gets better reception that way for some reason. i wanted to mention this in case you were having issues and want to get better reception and/or more channels.
Thank you for leaving a comment. It really depends on your location and where the towers are located. Along with other factors such as terrain and other obstacles between your home and the towers. What you experienced wouldn't necessarily happen for everyone, but it's always great to provide your experience, just in case. We appreciate you!!
Truth and Quality.
Practical and Useful Information.
Don't mean to be picky.
Mounting antenna down slope on the roof , below the highest point of the roof and mounting antenna with out regard to location is not a good picture to show to people.
Reason:
Many people are sloppy and just stick the antenna anywhere.
When they see the same in pictures then they think is Ok to just stick em up in a haphazard manner and in poor to bad locations.
No thinking required , just stick em anywhere.
Hi Gene,
Thank you for your feedback. I will send your comments over to our video team.
The Truth is many people are only concerned about image and have no interest in , Truth , Practical and Useful.
I don't have this Antenna , but i have 2 other ClearStream Antennas , that i use indoors , i am very happy with these Antennas from Clear stream one is 2MAX very good , and i got another which it maybe a close out , i got from a closeout retail store , this company has got my maybe future business , if i should need another TV Antenna .
They definitely got the magic sauce for TV antennas. :D The only suggestion I have for the company, is if they use an amplifier/booster on certain models, to mount it at the back of the antenna, instead at the end of the cable which plugs into the TV. The reason for this, is to pre-amplify the clean signal coming out of the antenna without any signal loss introduced by the long cable. In other words, it's best to pre-amplify the signal before sending it down the cable than the other way around. The only downside is that they have to include a power injector for the the coax cable to power the amplifier/booster at the back of the antenna, but the results are well worth it.
How do I know if this antenna will work inside of my apartment unit? I live in Ohio, and I want to know how many channels would I receive with the antenna.
Hi Sara, please call our support team at 877-825-5572 or chat with a rep online at antennasdirect.com and they will perform a free signal analysis in your area to make an antenna recommendation based on your location. If you want to check the number of channels available in your area , click this link and enter your zip code www.antennasdirect.com/transmitter-locator.html. Scroll down to see the number of channels available to you.
How do I get the sound to play on my Klipsch Bluetooth wireless speakers? Other Ports for Roku & Firestick work great for sound. Looks like I’m going to have to return and purchase from another company that sells Antennas, that connect to wireless speakers.
The antenna connects to the coaxial
Connector on your TV and the Bluetooth speaker will play sound via the TV.
@@christinehand2687 although it is a Toshiba, smart TV, it is 10 years old. When I purchased the klipsch speakers & subwoofer, I never found a menu option under sound for Bluetooth connecting
price more than doubles in less than 2 years from this ad! unbelivable!
what ?
Is there a chance for corrosion or moisture ingress between the base and connections? The way it seals doesn’t look water tight.
Hi Timothy! We build our products with premium, durable materials and have several techniques built within the antenna to specifically prevent corrosion and moisture issues. We also back our products with a lifetime warranty on all parts, so if for some reason there ever is an issue, we will make it right for you with no problems. If you would like a more thorough explanation, give one of our experts a call at 877-825-5572. They are available 7 days a week to help!
I use two command hooks to attach my antenna to the wall. The antenna is light weight and I can always move it without worrying about what’s behind the wall when drilling.
That's awesome!
Great idea, will definitely give a try. In my condo, I'm not allowed to mount the antenna outdoors, so after a lot of trial and error, I found that mounting the antenna touching the ceiling above the in-window air conditioner unit, it provides the best signal on all the channels. Interestingly the metal air conditioning unit is likely affecting the signal positively, because if I mount it anywhere else, I can only get about half the channels. It might be acting as a ground plane, concentrating the signal more. Thought I share this little tip.
The telephone number advertised for Help disconnects upon inputting the number. So much for support!
Hello, we are here! Call 877-825-5572 for support M-F from 9am to 7pm CST. I'm not sure if there was an issue with the phone lines during the winter storm last night. Sorry for the inconvenience. Give us a call today!
Does this use a power cord like some of the pre-amped antennas? Id rather have 1 that only needs the coax
@edwardstettler the ClearStream MAX-V uses a coaxial cable only.
@@ADirect good. That's what I want. My current antenna needs the amplifier box so when a storm knocks over our, the antenna won't work. This one should work with a portable tv
Is the Max-V much different than the 2-Max? I am looking for a more reliable indoor antenna than what I have. I am within 20 miles of most of the towers I want near Green Bay. My current one made by Amazon is one of those flat antennas. I can get most of the channels, but sometimes I lose signal. I keep seeing the 2-Max as one of the most reliable indoor antennas and now I see you have the Max-V. The VHF signals like Fox and CW seem to be the biggest challenge. I use it with Tablo and then I can DVR the channels and watch on any TV in the house.
Hi T.J., The MAX-V is the same antenna as the 2MAX. There are limited installation components, so you only buy what you need for your antenna setup. Meaning, the antenna comes with a wall bracket and adjustable mounting hardware for a mast - you would need to purchase a mast, coaxial cable, and if you would like to use the antenna indoors, we have a base stand that is sold separately as well. We love Tablo!
Here are links to pages to help you:
ClearStream MAX-V antenna store.antennasdirect.com/clearstream-max-v-uhf-vhf-indoor-outdoor-hdtv-antenna.html
Masts and indoor base stand: store.antennasdirect.com/antenna-mounts.html
Coaxial cable: store.antennasdirect.com/coaxial-cable.html
We can also perform a free signal analysis at your location, so you can be sure you are purchasing the right antenna. VHF signals will depend on distance to the towers and also the frequency it is broadcasting- might be low-VHF and not Hi-VHF. We can determine this for you. Our tech support is the best in the business! It should only take about 10 mins for the analysis. We are available 7 days a week at 877-825-5572.
@@AntennasDirect Thanks, that's very helpful. It looks like Fox, CBS, and ABC are all Hi-V when I use an online tool. Everything else is UHF.
I'll take a look at the supplies I need, I may have the right coaxial cable. Then I'll probably be getting this antenna.
@@t.j.schmidt9877 Great!
They definitely make great antennas. The only suggestion I have for the company, is if they use an amplifier/booster on certain models, to mount it at the back of the antenna, instead at the end of the cable which plugs into the TV. The reason for this, is to pre-amplify the clean signal coming out of the antenna without any signal loss introduced by the long cable. In other words, it's best to pre-amplify the signal before sending it down the cable than the other way around. The only downside is that they have to include a power injector for the the coax cable to power the amplifier/booster at the back of the antenna, but the results are well worth it.
Hi Bill, We do not preamplify our antennas. The main reason is that there are those antenna users who don't need preamplification, so there is no reason to add additional cost to users that may or may not need it. If preamplification is needed, we sell preamplifiers separately and also provide an illustration that shows the proper installation. Thank you for your feedback and leaving a comment on our page. Much appreciated!
@@ADirect < I guess what I was trying to suggest, is that in case an amplifier is used (factory or user supplied), it's best to boost the signal right at the base of the antenna, rather at the TV set. The reason for this, is to amplify the clean signal coming out directly from the antenna without a signal loss induced by a relatively long coax cable. In other words, it's best to amplify the signal before sending it down the cable rather than at the TV set. The only downside is that they have use a power injector through the the coax cable to power the amplifier/booster, but the clean and strong signal is worth it.
Do circular UHF elements perform better than bowtie ones on DB2E and DB4E?
Hi Casey, what is most important is that the elements are tuned to receive the right frequencies in North America and this is why we hold a patent on our element designs. Whether you decide to use an Antennas Direct loop or a bowtie antennas, you will receive great performance.
@@AntennasDirect I dropped my 4 disc ClearStream antenna 3 ft onto a hard carpet floor will that damage any of the internals on my antenna?
I don't watch a lot of TV because most of the TV signals coming from the Seattle TV stations are mind control programming to deceive the masses.
@@unitedstatesirie7431 No damage should occur with the antenna. ClearStream antennas are so robust, the can withstand 70+ mph winds. Thank you for sending us a message.
i love this antenna it works good
Can this be installed upside down? I assume yes, but might as well ask. I have a good indoor spot in a roof peak for this but only if the VHF mast is at the bottom.
Hi Casey, yes you can hang the antenna upside down. Please make sure there are no obstructions between your roof peak and the towers before installing the antenna. You will want to test that area when you plan to install by temporarily positioning the antenna in the roof peak and run a cable to your TV and scan for channels. TV signals can be a little tricky at times, so you always want to make sure you test the area first before permanently installing the antenna.
Great video!!👏🏼 Cut that cord!!👍🏼
I just installed your ClearStream MAX-V antenna for a friend based on the recommendation of the "Antenna Man" on RUclips. It seems to be working OK. Technical question: The VHF element is a single piece of aluminum covered with a black coating. Since it's a single piece, it doesn't appear to be a typical dipole. Can you tell me how the VHF element works, and how it is RF coupled to the feed point, since there is no electrical hookup. Thanks, Bob
Hi Bob, the VHF element is engineered to work via electromagnetic coupling which is our patented protected. Thanks for sending us a message!
How do i add channels
Hi there, I think almost all TV models are a little different, but here is the general idea of how to get to menu to add a channel... under settings, select preferences, select channels, select antenna, and there should be a setting that says "add digital channels". If you cannot find this, please call our support team at 877-825-5572 and give them the TV model and they will look it up for you. Thanks!
Perform a channel rescan. What kind of TV do you have?
I have the antenna and app I don't know how to work the app to see where ny antenna goes. I'm on a first floor apartment. So it's indoor only.
Hi Genia, we are here to help you! Please call us at 877-825-5572 and support will walk you through the app so you can aim your antenna. Thank you for leaving a message.
Hi Genia, you can give our customer service a call at 877-825-5572. They can perform a free signal analysis for your location and help you locate the best place to install your antenna.
I bought the max v and a converter. Hooked it up to tv and can not get any channels. I am in the bottom of Missouri. Help
Hi Brenda, Once you connect your digital converter box to your television, you may need to set your television to channel 3 or 4 or possibly to an input setting specific to using video input or the S-video input on your television, such as “Video 1” or something similar. You will need to look at the converter box instructions. Once everything is connected and both converter box and TV are turned on set the TV in the menu to the correct channel or input, the digital TV menu should appear. You will then need to perform a “channel search” or "channel scan". If the channel search process doesn’t find any channels, your antenna is in a place where the signals are coming from the towers so you will need to move the antenna to antenna location and perform the channel search again. If you are still not receiving TV channels, please call our support line at 877-825-5572 and speak to a rep. They can check your location and see if there are obstructions, like tall trees or buildings blocking the signals and advise your where the antenna needs to be placed in order to receive TV signals. Thank you for sending us a note.
Everyone needs to dump their cable company they're ripping you off
True! And get a TV antenna from Antennas Direct. It's the perfect companion with streaming Netflix, Hulu and Amazon Prime.
I can't believe the box doesn't even say to buy this with a coaxial cable.
_🙄_
On the front of the box in the lower left-hand corner it says Coaxial Cable and Mast Not Included.
@@ADirect Ah, I see.
Antennas like this aren't good for low vhf channels (RF 2 - 6). The horizontal elements have to be longer, like the old rabbit ears. The FCC has moved some channels to this area.
Epiphoney, to receive low VHF channels (RF 2 - 6) you would need horizontal elements that are approx 10 feet long, so old rabbit ears will not receive these low frequencies. Our elements have been known to pick up the high end of low VHF at a very short-range, but the environmental circumstances need to be perfect.
@@AntennasDirect I can receive NYC RF 3 from 20 miles away in NJ with rabbit ears but not with the max-v. That is my experience. I do have to go outside my window.
@@epiphoney glad you are able to receive it.