@@ONLY_EXOTICSS i could just turn off my pc and on again but im trying to save my progress that im working on before the screen went dark.. unfortunately there are no autosaves
How to fix if the monitor on is not showing any display,these are the cases when the monitor on is showing something but what happened when it is turning on and automatically going into sleep mode.
It's not Microsoft's issue. Computers are not simple toys. If you don't know how to fix it, take it to a professional. Anyone can go to a store and buy one, but not everyone is cut out to maintain one.
@@coffee4ninjas Try turning off sleep mode and then try Hibernate instead, it's pretty much the same thing. Also make sure if you have a graphics card that it's seated properly in the pci express slot. Shut down the computer before opening it up.
@@mrfreeman1763 thank you. I sent it to Service center and it turns out the problem is the ram. They use a Eraser (literaly pencil Eraser) to clear my Ram. And then it fixed the problem. After bringing it back from the SC , I only encounter the problem 1 times in 3 month. (before it's 1,2 times in 1 week)
I do not recommend to change most of the settings mentioned in this video. This is clearly just a trial and error and mixing many non related stuff together. Following all of these procedures will only make your computer to never go sleep or wake up all the time and wasting lot of power. Even the smallest bump will make mouse move and wakes computer. Some high DPI devices or keyboards with touchpad can wake computer all the time, even several times a day. You can return from holiday and find your computer running all the the time you were away (could be weeks) and wasting electricity. Never disable sleep mode completely, as this will not solve your monitor not waking up and only WILL lead to waste power and wear your computer parts. It will not help with monitors not waking up. There are known problems with HDMI not waking up, mostly related to driver issue or Windows issue you cannot solve by fiddling around non related settings.
This video is not about fixing your monitor and will not help if something is wrong with the monitor itself. So if nothing is wrong with your monitor just restart your computer and everything should come online. If they don’t then you have other problems.
There is one more thing that needs to be checked, the connection cable that connects the monitor and your device. 2 months earlier, I had brought back a 24-inch monitor and tried connecting to my business laptop, it did not work. After a few days of trial & error checking, I just replaced that mentioned cable to a new one. It resolved my issue.
Hi Brian.☺ Just want to leave a comment here thanking you - so much! - for your channel. Speaking for us "older folks" you are my first "go to" for ANY computer issue!! And, (not what most of your young male tech fans would think) I understand almost all of what your videos explain! Thank you, thank you. from Beth, almost 80. p.s. also grateful for your recommendation of Glary utilities, maintenance section. ♥☺♥
I would like to add that you turn off ErP ready in the BIOS if you turned it on recently. ErP is a standard of power saving features that some hardware may not be fully compatible with. I actually only experienced this issue trying to wake up where the system power light stopped blinking and the GPU LED lighting turned on (MSI RTX 4080) but the display continued to say I had no signal. My display is a TV set that I turn off when not in use so when I'm ready to wake my PC, I turn it on and of course it is awake and looking for a signal. My integrated CPU graphics was already disabled in control panel by this point and I honestly never heard of the Win+Ctrl+Shift+B option so if I see any issues in the future, I'll try to remember that as well, but for my I think the ErP standard was the culprit and worth mentioning at least in your textual steps if you can't splice in a segment into your video to cover this.
How exactly will toy see any of this if the monitor won't wake up? however, a good tip to be sure the PC is properly set up to not go to sleep. Except for true laptop of course
What this video means is your screen is fine, just occasionally when your pc is supposed to wake up from sleep mode the computer kicks on but the screen doesn't respond. If your laptop screen is busted, take it to a repair shop. Laptops are a pain to work on, even if you're good at normal computers, they are so fragile and finnicky that you will mar and damage it trying to get it apart. Most of the time with a laptop screen not responding the problem is an internal ribbon cable is either worn out or disconnected. Just take it to a pro. That aside, this is mainly for PC's (Desktop) with a graphics card installed or gaming laptops: Obviously you should check all the basics. Check the cable connections, if you're using a screen with multiple inputs, make sure you have the right one selected, try changing to a different input and then go back. Keep in mind that all cables are not the same, if you're trying to do a high resolution/high framerate, you need a cable that is able to actually handle the load. If that stuff doesn't work, force the computer to shut off by holding the power button down until it shuts off, normally only takes a few seconds of pressing the button. Give it 5 seconds and then press the power button to turn it back on, if the screen works now, then you have an intermittent problem. That's what this video is covering. NEVER UNPLUG A RUNNING COMPUTER unless you can't get it to shut down otherwise (Laptop excluded). Always try to shut it down in the operating system, if that can't be done, hold the power button down for a few seconds until it shuts off. Only if that doesn't work should you force the power off. Even in that case, there is an I/O switch on the back next to the power cord (Desktop only), flip that to the 0 position and then back to the 1 position after 5-10 seconds. Then press the power button and see if the screen responds when the operating system boots up. If you just installed a new graphics card and are having issues, make sure you update your BIOS. New graphics cards have new technology and your mother board doesn't know what to do with it. Even if you don't have issues, check for a motherboard BIOS and Chipset update anyways, you can get more performance and obviously security with updates. If you don't feel comfortable, take it to a shop or ask a friend who is good with computers. This mainly applies to mainstream motherboards, typically if the computer was built by yourself or someone you know, if it's a manufactured PC (iBuyPower, Alienware, etc) then it will likely have a generic motherboard that will be difficult to update, if it's even still supported. If you are changing to a new card and it's a different platform, such as going from Nvidia to AMD or the other way around, then you need to look up a guide on how to remove the old drivers and install the new drivers. This will stop the drivers from interfering with each other. If you are staying with the same platform but upgrading to a new card, just make sure you have updated the graphics drivers and the BIOS and chipset. If your only real issue is the intermittent problem with the screen not responding (really it's the graphics card failing to send a signal) then consider not using sleep mode and just try hibernate instead, it's basically the same thing. When you're away from your computer for long periods of time such as leaving for work/going to bed, consider just shutting it off all together. Sleep mode uses the RAM and Hibernate uses the SSD/HDD, it's possible your system is having trouble just with sleep mode, so try hibernate instead. The intermittent issue is a rabbit hole with many possible outcomes, it is possible it is completely out of your control and is just a minor annoyance you will learn to live with. Not a big deal to have to force the computer to shut down and restart once in a while. At this point I think it's a problem with the graphics card manufacturers, because I never had this issue with this PC until I switched to an RTX 3080 from a GTX 1080ti.
My Monitor wakes from restart and power off/on. The issue is from waking from sleep, pc will wake up but monitor is still black.I also did a fresh windows install with no help!
I was following your video but my pc just goes back into sleep mode as I’m on it & can’t get it to turn back on when I move the mouse or press a button
Simply unplug the projector from the back and hold the power button for 10 seconds or so and let go. Leave it unplugged for about 30 seconds and plug it back in and restart the pc. That's what i did with my benq led monitor. It must have put it back to default.
Only you had the solution ..... Thanks. The guys video does not solve the problem asked. If the monitor is not coming up, how can I do all the process in the video.
@@adeolacoded2321 You just misunderstood the point of the video. It's aimed at people with working monitors that don't come on when waking from SLEEP MODE. It doesn't mean the monitor won't ever turn on.
Hi, I have a gigabyte m27q monitor. During the memtest86, it goes to deep sleep and not wake up. Since the memtest can be done by booting the flash, does all work for it too?
thanks for this. my laptop is pretty inconsistant when waking up from sleep (i used bluettoh keyboard and mouse, and connected to a monitor). hopefully this will fix it
So i have a different issue sometimes my Monitors go into auto power save mode and wont wake up and i have to turn off my pc. Other issue i have is my monitor will go black but the pc is on while i am idle and I can go back and by moving the mouse. The thing is its annoying. Is there any fix?
I don't know if this is related, but if when I'm turning my PC off and I accidentally press "power saving mode" I can't wake it up with my mouse, keyboard or pressing the power button like some suggest. I have to press the power button down for a few seconds like I'm doing a hard reset and when it boots up again I have to go through bios because it thinks something went wrong. How can I wake the PC up from that mode without all the hassle?
Can it be fixed by the Bios as we are setting up an oldesh motherboard testing it shows the bios screen section but after say 2 mins its goes to sleep/power saving mode and will not reawake the setup/monitor.
My monitor goes to sleep and won't wake every Sunday morning! What is that about? I Can't even turn the tower off. I have to turn the power strip off, wait a minute, turn it back on an restart.
Hello and thank you for this video. My monitor won't start together with the pc (running win 10 home). I need to press its (the monitor's button) twice. This is to say there's a signal coming (this is not a "no signal" circumstance) from the pc. It is the monitor that won't synchronise with the pc. Aforementioned happens only on start up of pc (pc going from off to on), not while pc has been hibernating. any help will be much appreciated. Thank you again.
Tried all your remedy's except for the reg edit.. ( there was no folder under that name in my registry with windows 10.) , but after trying all your fix-iits .. my monitor will not awake when mouse or keyboard is touched.. I have to manually turn ON the monitor to see .
CAN SOMEONE PLASS HELP ME So pc went from standby mode i tried moving my mouse for like the past 2 mins and then went to a black screen and the power button light was going on and on while im moving my mouse
So my computer screens refuse to turn on, even after restarts. Sometimes power cycling the computer several times works in getting the screen turned on. When that doesn't work I need to unplug my computer, wait for it to full run down and then turn it back on.
I put my pc in sleep mode by accident when shutting down my PC now I get DVI no signal. I have tried to hold the start swich for 5-30 seconds to reset it no joy. Then I used HDMI lead into tv still no joy. I open up cleaned out dust fans are working can't see anything wrong that I can see checked the slots. I dont think it's the lead because HDMI won't work either PC boots up just DVI no signal. Does anyone have any ideas on a fix?
hello plz can you help me i'm using 2 monitors and the main one is using vga to hdmi cable and the 2nd is coneccted to the other port i've recognized that movies and games became so much dark i search this again and again until i found what is called the (RGB) in nvidia control panel i change it to YCbCr444 and colors are back to normal but when i install a new game the first monitor in going to sleep id why plz can you help
I accidentally knocked the plug of my outlet and when i turned it back on it bought me to the automatic repair screen, but none if the troubleshooting options work. PLEASE HELP!!
Thank you so much, Britec09! I cannot express how frustrating this issue has been for me these past months. My issue is resolved now because of your walkthrough. Many thanks and God bless ❤
I don't see any HID Keyboard Devices (and HID mouse) in my device manager. I believe this because if it I cannot wake my laptop from sleep. Is there anyone who can help?
I'm using AOC 24G2U5 and when I connected it with Display Port it wont wake up from sleep. When I connect it with HDMI I dnt have that problem. I have 1660 super and I changed DP cable and still the same problem.
thanks for this video it works. i was this problem on b550 with 5600x cpu light error .. now all works come back from sleep pc working fine :) +like for you
Everytime i shutdown and turn on my pc, my monitor picture settings like (brightness, contrast) resets to its defaults no matter i changed the settings they resets after i turn on the pc any fix for this? Pls
Wait wait minute i have difrent problem when i turn my pc evrything works but one problem no screen only black and text no video onput or enter sleep mode it doesn't weak ups and i can't turn on screen how i can change steings or weak him up if i can't not see screen ha ?
![[Fixed] Windows DOESN'T WAKE UP from Sleep (BLACKSCREEN)](http://i.ytimg.com/vi/wMgIc400c0E/mqdefault.jpg)
HOW AM I GONNA DO THIS IF MY PC MONITOR IS NOT WAKING UP??????
Exactly 💯
same problem exactly
@@jamessu6013 just unplug your pc n plug it back in n turn it on it worked for me
@@ONLY_EXOTICSS i could just turn off my pc and on again but im trying to save my progress that im working on before the screen went dark.. unfortunately there are no autosaves
@@jamessu6013 I think it stil saves bro
How to fix if the monitor on is not showing any display,these are the cases when the monitor on is showing something but what happened when it is turning on and automatically going into sleep mode.
Why is it so hard to wake monitor up from sleep mode. MS is literally doing nothing to fix this.
because there are some people who got problems like me. My computer goes to sleep. When I wake it up, everthing wakes but the monitor wont.
@@coffee4ninjas reporting for duty with black screen on wake up here too
It's not Microsoft's issue. Computers are not simple toys. If you don't know how to fix it, take it to a professional. Anyone can go to a store and buy one, but not everyone is cut out to maintain one.
@@coffee4ninjas Try turning off sleep mode and then try Hibernate instead, it's pretty much the same thing. Also make sure if you have a graphics card that it's seated properly in the pci express slot. Shut down the computer before opening it up.
@@mrfreeman1763 thank you. I sent it to Service center and it turns out the problem is the ram. They use a Eraser (literaly pencil Eraser) to clear my Ram. And then it fixed the problem. After bringing it back from the SC , I only encounter the problem 1 times in 3 month. (before it's 1,2 times in 1 week)
Turning off sleep mode to solve the problem of the display not turning on after waking up is like just not having sex as a contraceptive.
I thought that option was a bit ridiculous.
No help still monitor goes to sleep mode :((
I do not recommend to change most of the settings mentioned in this video. This is clearly just a trial and error and mixing many non related stuff together. Following all of these procedures will only make your computer to never go sleep or wake up all the time and wasting lot of power. Even the smallest bump will make mouse move and wakes computer. Some high DPI devices or keyboards with touchpad can wake computer all the time, even several times a day. You can return from holiday and find your computer running all the the time you were away (could be weeks) and wasting electricity.
Never disable sleep mode completely, as this will not solve your monitor not waking up and only WILL lead to waste power and wear your computer parts. It will not help with monitors not waking up. There are known problems with HDMI not waking up, mostly related to driver issue or Windows issue you cannot solve by fiddling around non related settings.
Unless you have a spare monitor, how would you check these things if the monitor isnt waking up?
You answered your own question.
This video is not about fixing your monitor and will not help if something is wrong with the monitor itself. So if nothing is wrong with your monitor just restart your computer and everything should come online. If they don’t then you have other problems.
4:50 so basically to solve the NOT waking up is to NOT let the computer to sleep. LOL!
There is one more thing that needs to be checked, the connection cable that connects the monitor and your device. 2 months earlier, I had brought back a 24-inch monitor and tried connecting to my business laptop, it did not work. After a few days of trial & error checking, I just replaced that mentioned cable to a new one. It resolved my issue.
Hi Brian.☺ Just want to leave a comment here thanking you - so much! - for your channel. Speaking for us "older folks" you are my first "go to" for ANY computer issue!! And, (not what most of your young male tech fans would think) I understand almost all of what your videos explain! Thank you, thank you. from Beth, almost 80. p.s. also grateful for your recommendation of Glary utilities, maintenance section. ♥☺♥
Amen bayhome43
I would like to add that you turn off ErP ready in the BIOS if you turned it on recently. ErP is a standard of power saving features that some hardware may not be fully compatible with. I actually only experienced this issue trying to wake up where the system power light stopped blinking and the GPU LED lighting turned on (MSI RTX 4080) but the display continued to say I had no signal. My display is a TV set that I turn off when not in use so when I'm ready to wake my PC, I turn it on and of course it is awake and looking for a signal. My integrated CPU graphics was already disabled in control panel by this point and I honestly never heard of the Win+Ctrl+Shift+B option so if I see any issues in the future, I'll try to remember that as well, but for my I think the ErP standard was the culprit and worth mentioning at least in your textual steps if you can't splice in a segment into your video to cover this.
How exactly will toy see any of this if the monitor won't wake up? however, a good tip to be sure the PC is properly set up to not go to sleep. Except for true laptop of course
you unplug and plug back in
Wrong it's a laptop without a removable battery.
My monitor screen shows nothing.I have powered off and turned the monitor on again but I still have a black screen.
what does the csenabled key change ?
What this video means is your screen is fine, just occasionally when your pc is supposed to wake up from sleep mode the computer kicks on but the screen doesn't respond. If your laptop screen is busted, take it to a repair shop. Laptops are a pain to work on, even if you're good at normal computers, they are so fragile and finnicky that you will mar and damage it trying to get it apart. Most of the time with a laptop screen not responding the problem is an internal ribbon cable is either worn out or disconnected. Just take it to a pro.
That aside, this is mainly for PC's (Desktop) with a graphics card installed or gaming laptops:
Obviously you should check all the basics. Check the cable connections, if you're using a screen with multiple inputs, make sure you have the right one selected, try changing to a different input and then go back. Keep in mind that all cables are not the same, if you're trying to do a high resolution/high framerate, you need a cable that is able to actually handle the load. If that stuff doesn't work, force the computer to shut off by holding the power button down until it shuts off, normally only takes a few seconds of pressing the button. Give it 5 seconds and then press the power button to turn it back on, if the screen works now, then you have an intermittent problem. That's what this video is covering.
NEVER UNPLUG A RUNNING COMPUTER unless you can't get it to shut down otherwise (Laptop excluded). Always try to shut it down in the operating system, if that can't be done, hold the power button down for a few seconds until it shuts off. Only if that doesn't work should you force the power off. Even in that case, there is an I/O switch on the back next to the power cord (Desktop only), flip that to the 0 position and then back to the 1 position after 5-10 seconds. Then press the power button and see if the screen responds when the operating system boots up.
If you just installed a new graphics card and are having issues, make sure you update your BIOS. New graphics cards have new technology and your mother board doesn't know what to do with it. Even if you don't have issues, check for a motherboard BIOS and Chipset update anyways, you can get more performance and obviously security with updates. If you don't feel comfortable, take it to a shop or ask a friend who is good with computers. This mainly applies to mainstream motherboards, typically if the computer was built by yourself or someone you know, if it's a manufactured PC (iBuyPower, Alienware, etc) then it will likely have a generic motherboard that will be difficult to update, if it's even still supported.
If you are changing to a new card and it's a different platform, such as going from Nvidia to AMD or the other way around, then you need to look up a guide on how to remove the old drivers and install the new drivers. This will stop the drivers from interfering with each other. If you are staying with the same platform but upgrading to a new card, just make sure you have updated the graphics drivers and the BIOS and chipset.
If your only real issue is the intermittent problem with the screen not responding (really it's the graphics card failing to send a signal) then consider not using sleep mode and just try hibernate instead, it's basically the same thing. When you're away from your computer for long periods of time such as leaving for work/going to bed, consider just shutting it off all together. Sleep mode uses the RAM and Hibernate uses the SSD/HDD, it's possible your system is having trouble just with sleep mode, so try hibernate instead.
The intermittent issue is a rabbit hole with many possible outcomes, it is possible it is completely out of your control and is just a minor annoyance you will learn to live with. Not a big deal to have to force the computer to shut down and restart once in a while. At this point I think it's a problem with the graphics card manufacturers, because I never had this issue with this PC until I switched to an RTX 3080 from a GTX 1080ti.
>>>> your pc is supposed to wake up from sleep mode, the computer kicks on but the screen doesn't respond.
Thank you, Brian. Changing PCI Express, link power state to OFF did the trick for me. 👍
My Monitor wakes from restart and power off/on. The issue is from waking from sleep, pc will wake up but monitor is still black.I also did a fresh windows install with no help!
Did you find any solution....?
Please reply....... Same problem with my new pc
2 years late, still works, thanks
I was following your video but my pc just goes back into sleep mode as I’m on it & can’t get it to turn back on when I move the mouse or press a button
So I got a brand new monitor with a pc and it says standby mode,does it need charge or some time to start?
Please help i did this stuff and now when i press sleep it just straight up shuts down
Simply unplug the projector from the back and hold the power button for 10 seconds or so and let go. Leave it unplugged for about 30 seconds and plug it back in and restart the pc. That's what i did with my benq led monitor. It must have put it back to default.
Only you had the solution .....
Thanks.
The guys video does not solve the problem asked. If the monitor is not coming up, how can I do all the process in the video.
@@adeolacoded2321 You just misunderstood the point of the video. It's aimed at people with working monitors that don't come on when waking from SLEEP MODE. It doesn't mean the monitor won't ever turn on.
turning off hibernation did the magic, thxxx
My build (Win10Pro 20H2) doesn’t have CSEnabled - is there an alternative in Registry?
same here, and i still cant find a solution
Hi, I have a gigabyte m27q monitor. During the memtest86, it goes to deep sleep and not wake up. Since the memtest can be done by booting the flash, does all work for it too?
I cant see anything to do this... its black and i cannot get it out of sleep. Help.
I try every step, sleep mode still not working, why ? Are there any other possibilities ?
thanks for this. my laptop is pretty inconsistant when waking up from sleep (i used bluettoh keyboard and mouse, and connected to a monitor). hopefully this will fix it
Can’t do this if the sceen is not showing, and unplugging everything even the pc for 10 mins didn’t do anything
So i have a different issue sometimes my Monitors go into auto power save mode and wont wake up and i have to turn off my pc. Other issue i have is my monitor will go black but the pc is on while i am idle and I can go back and by moving the mouse. The thing is its annoying. Is there any fix?
Hi I think my PC go into sleep mode but it Whan waking up but the botton led show it looks like is on standby led gos on and of
Try to switch to hdmi cable if you use dp
I don't know if this is related, but if when I'm turning my PC off and I accidentally press "power saving mode" I can't wake it up with my mouse, keyboard or pressing the power button like some suggest. I have to press the power button down for a few seconds like I'm doing a hard reset and when it boots up again I have to go through bios because it thinks something went wrong. How can I wake the PC up from that mode without all the hassle?
Is there a way to fix a hibernating computer that wont turn on without doing the restart each time?
Can it be fixed by the Bios as we are setting up an oldesh motherboard testing it shows the bios screen section but after say 2 mins its goes to sleep/power saving mode and will not reawake the setup/monitor.
😅....I Got a black screen.....also....i do not see anything..,...great start to this video
Thank you!!! This was driving me insane.
Thanks brother it worked !!!
Finally, I have been cursing MSI Monitors for months, Thxs a ton
Hey im still having this issue my main monitor just doesnt wake up
Windows power settings determine the application of PC's sleep mode.
Hi Britec, please make a video on booting up to see a striped orange monitor screen and how to fix that. Thanks.
"is set to 'never'" well i just learned something new. oh btw setting it to "0" also sets it to never.
Thanks for this easy way to solve the problem of randomly waking up from hibernation or sleep mode.
My monitor goes to sleep and won't wake every Sunday morning! What is that about? I Can't even turn the tower off. I have to turn the power strip off, wait a minute, turn it back on an restart.
This is happening on my Windows 7 - monitor stays asleep when PC wakes up... any suggestions?
Computer won't wake from sleep mode... how the hell do you get to device manager while in sleep mode? ffs
Perfect video. Thank you!! This was driving me nuts!
Mine was working fine on the Monitor when i did your steps it stoped completely ? 😡
I accidentally click sleep mode☹️ how can I open my computer?
How do you go to start if the screen is black?
Is this applicable to a laptop, mine when screen timeout i cannot wake the screen it stay black but i can hear the movie playing or youtube.
this dosent help how can i see my screen when its not working basically in sleep mode t
Thanks, looks like I fixed it finally!
Most excellent description of where the clues are and how to correct the problem. Thank you
this problem can be a proper pain in the backside, a lot of users just turn it off, I didn't know the driver could be the problem, Thanks
How tf am I supposed to do any of this my monitor is working but pc is running
How fix if the screen is black
Yea like I'm gonna click device manager with a black screen
Hello and thank you for this video.
My monitor won't start together with the pc (running win 10 home). I need to press its (the monitor's button) twice. This is to say there's a signal coming (this is not a "no signal" circumstance) from the pc. It is the monitor that won't synchronise with the pc. Aforementioned happens only on start up of pc (pc going from off to on), not while pc has been hibernating.
any help will be much appreciated.
Thank you again.
i got pc . green light/ fans on ..no monitor ..changed power supply and ram..still no monitor any help will be great..thanks ..
Thank you so much.
You're welcome!
@@Britec09 Above video had been helpful, thank you. I had posted above to a discussion on Microsoft Community, hope it would help others as well.
Tried all your remedy's except for the reg edit.. ( there was no folder under that name in my registry with windows 10.) , but after trying all your fix-iits .. my monitor will not awake when mouse or keyboard is touched.. I have to manually turn ON the monitor to see .
CAN SOMEONE PLASS HELP ME So pc went from standby mode i tried moving my mouse for like the past 2 mins and then went to a black screen and the power button light was going on and on while im moving my mouse
Bro it's black screen how the hell am I suppose to do that?
what if your monitor fails to display the screen. Then none of these fix the problem.
Is the monitor not turning on how can I get to that screen I wouldn't be looking for a solution if I can just turn on dude
So my computer screens refuse to turn on, even after restarts. Sometimes power cycling the computer several times works in getting the screen turned on. When that doesn't work I need to unplug my computer, wait for it to full run down and then turn it back on.
This is useless, none of us can turn on the pc how are we supposed to change all these settings
I put my pc in sleep mode by accident when shutting down my PC now I get
DVI no signal. I have tried to hold the start swich for 5-30 seconds to reset it no joy.
Then I used HDMI lead into tv still no joy. I open up cleaned out dust fans are working
can't see anything wrong that I can see checked the slots. I dont think it's the lead because HDMI
won't work either PC boots up just DVI no signal. Does anyone have any ideas on a fix?
Found any fixes yet?
How can we do this if there is no display on screen😭 (black screen)
hello plz can you help me i'm using 2 monitors and the main one is using vga to hdmi cable and the 2nd is coneccted to the other port i've recognized that movies and games became so much dark i search this again and again until i found what is called the (RGB) in nvidia control panel i change it to YCbCr444 and colors are back to normal but when i install a new game the first monitor in going to sleep id why plz can you help
As soon as i clicked this video, my pc woke up wtf
@SilverApplesauce yea ik this was 6 months late but i used my phone ok
How the hell am I supposed to do this of my monitor isn't waking up??
I accidentally knocked the plug of my outlet and when i turned it back on it bought me to the automatic repair screen, but none if the troubleshooting options work. PLEASE HELP!!
Thank you so much, Britec09! I cannot express how frustrating this issue has been for me these past months. My issue is resolved now because of your walkthrough. Many thanks and God bless ❤
I cant do it because it’s black screen
how tf im gonna see something if my monitor is on stanby mode
God damnit I said when my screen is black NOT WHEN MY SCREEN IS STILL WORKING
I don't see any HID Keyboard Devices (and HID mouse) in my device manager. I believe this because if it I cannot wake my laptop from sleep. Is there anyone who can help?
I'm using AOC 24G2U5 and when I connected it with Display Port it wont wake up from sleep. When I connect it with HDMI I dnt have that problem. I have 1660 super and I changed DP cable and still the same problem.
thanks for this video it works. i was this problem on b550 with 5600x cpu light error ..
now all works come back from sleep pc working fine :) +like for you
Did all of this and still nothing
How do I right click when my fuckin monitor is on a black screen. -.-
Everytime i shutdown and turn on my pc, my monitor picture settings like (brightness, contrast) resets to its defaults no matter i changed the settings they resets after i turn on the pc any fix for this? Pls
There is no power management option shown in my computer...instead it shows a resources tab....what should i do...please help....
How am i gonna do this when my monitor is not working ffs?
Thanks allot for your video, you fixed my problem with sleep mode.👍🙏
how can u do the all setting when monitor is always black?
So impressed, I didn't know Michael Caine knew so much about computers!
There is no "additional power settings" on my latptop. It's a HP laptop running windows 11.
Bro my pc automaticli get into sleep mod
This has been happening with my 3-month-old PC for the past couple of days.
Still is.
Thank you for the video, but it is not how to fix the monitor from not waking up. It is how to prevent the monitor from going to sleep.
This always happens to me, so I just restart my pc..LOL 😀. Thanks for the video mate.
No problem 👍
Great video and information!
Could you make a video how to make Miracast working on PC? I just cannot get it work
Please make a video on troubleshooting for BSOD (BLUE SCREEN ISSUES)
How could I change the setting of it's not even waking up yet😭
Great video bro really appreciate your efforts
Mine dont wanna wake up 😢,it just flesh a light on the power button, i tried long oressing and normal press but still it does wake up
that may be because your pc is broken or your monitor backlight is dead.
Wait wait minute i have difrent problem when i turn my pc evrything works but one problem no screen only black and text no video onput or enter sleep mode it doesn't weak ups and i can't turn on screen how i can change steings or weak him up if i can't not see screen ha ?