The dowel pointy finder thingies and the plug cutters seem good to me. A good box doesn’t mean a quality product…just a quality box. As for not sanding above 240 grit…I did a piece to 600 grit once and when the client touched it they let out an involuntary squeak. Great vid as always brother 👌
Thats what the electronics unboxing videos say ;) its probably not true. Lol, i loled at the "involuntary squeak" 😂 I wanna take a board and sand up to each of the grits and see the difference :)
@@WhosTheVoss definitely worth doing once. If you go as high as 600 I promise you it’ll feel amazing. You won’t be able to stop touching it. Just make sure your wife doesn’t walk in and catch you essentially fondling a board coz that might be hard to explain away.
As a beginning RUclipsr and poor woodworker so to speak tank you for showing temu actually has some good affordable tools I have got a lot of measuring tools that woodpecker charges very $100 and I got for less than then $20 and they are just as good in my opinion
Thanks buddy :) Temu is like Harbor Freight in my opinion, some things are good, some are not-so-good. Most of it is just fine for the ocasional use :)
You have a new subscriber. I followed your videos for a while and now I've decided to subscribe. I receive a lot of pop-up commercials from Temu, but I haven't bought anything from them yet. (fear from the unknown?
I dont have a lot of experience with miter saws, honestly any of them you can buy in a store would be a good pick, you might need to square it up with a combination square but even the cheap ones cut through your board the same as an expensive one, you just get bells and whistles with the $$$$$ saws. Watch for ones on sale at the box store, be careful with Faceook Marketplace gems, my saw is 10+ years old, so is my dads and you wouldnt know truely how much wear and tear they have been through, id scout for a new one
I got that double cyclone setup. They had them in a package it works quite well. I no dust accumulating in my shop vac since I installed it about two months ago. It's nice that the second cyclone has clear bottle.
I tried to showcase different tools and how to use them since they were mostly inexpensive and the majority of them I didn't own :) overall not bad stuff, some of it was cheap, but I also didnt pay a lot :P
Does the enclosed face cover sit comfortably with glasses? I do a little lathework but I have glasses. I have the second face sheild you have but I still get hit in the mouth with chunks occasionally 😅
I am new to your channel and I would like to know where you are from. I am a little new to wood working and doing you tube videos and are you on Facebook and I really like your videos. 😊
Wellllll, i use the sand hammer and drill press sanders quite often. The drill bits dull pretty dang quick, and I only use the planer for round overs. Although it was cheap, it held up okay :) a wee bit below Harbor Freight quality. I dont use any of this everyday or even every week, but it hasn't hit the trash can yet :)
I would strongly advise against buying things like plug cutters and sandpaper from them, even for so little. For that price you're going to be getting metal that goes dull in three applications, and I'd be willing to bet that that sandpaper will wear out even faster. I'll never buy anything from Temu because that whole "you get what you pay for" thing our parents drilled into us is very true. Especially in the shop.
If it's a "use it once or twice tool" this wouldn't be a bad spot to grab it, havnt used any of it in-depth to get a feel for if its good quality or not. This video was mainly to showcase what items are out there people might not own/know about :)
I've bought many things from them. A lot of it is just what you paid for. No more. Sometimes less😢. I have sent a lot of things back. Its a hit miss. One thing. Keep all packaging incase you have to send it back.
I tried to showcase different tools and how to use them since they were mostly inexpensive and the majority of them I didn't own. You do get what you pay for most definitely:P
@@WhosTheVoss mine I have already purchased but then they just not shipping my orders then canceled. Only happened to more expensive items that on sale or one of those free offers.
💰 Download TEMU App to get 30% off 【APP new users only】 : temu.to/m/uypfb8uk6ul
🛍️ Or search my code【 dmn9345 】on the TEMU App to claim
The dowel pointy finder thingies and the plug cutters seem good to me. A good box doesn’t mean a quality product…just a quality box. As for not sanding above 240 grit…I did a piece to 600 grit once and when the client touched it they let out an involuntary squeak. Great vid as always brother 👌
Thats what the electronics unboxing videos say ;) its probably not true. Lol, i loled at the "involuntary squeak" 😂 I wanna take a board and sand up to each of the grits and see the difference :)
@@WhosTheVoss definitely worth doing once. If you go as high as 600 I promise you it’ll feel amazing. You won’t be able to stop touching it. Just make sure your wife doesn’t walk in and catch you essentially fondling a board coz that might be hard to explain away.
As a beginning RUclipsr and poor woodworker so to speak tank you for showing temu actually has some good affordable tools I have got a lot of measuring tools that woodpecker charges very $100 and I got for less than then $20 and they are just as good in my opinion
Thanks buddy :) Temu is like Harbor Freight in my opinion, some things are good, some are not-so-good. Most of it is just fine for the ocasional use :)
Always next level information coupled with a great entertainment component. Thanks for all you do, Temu in the next one. Yeah...I went there!
I tried to showcase different tools and how to use them since they were mostly inexpensive and the majority of them I didn't own :) thanks buddy!
Love everything about this video, your wit and sense of humor. ThankYou
🤣 thanks buddy!!
“It’s a bag in a bag! That’s exciting!” I laughed too hard at that.
Everything was a bag in a bag! 😂
My cyclone was the same size as my shop vac hose. I made a couping out of a cutoff Oz gateraid bottle and a heat gun worked great!!!
Nice! :)
You have a new subscriber. I followed your videos for a while and now I've decided to subscribe. I receive a lot of pop-up commercials from Temu, but I haven't bought anything from them yet. (fear from the unknown?
Its like the Harbor Freight of online shopping, some of it is "cheap"ly made, but to use it and experiment with it, its not a bad buy
OT but what would a good "cheap" miter saw to get? one that is accurate, cuts square and is easy for a beginner to calibrate if needed....
I dont have a lot of experience with miter saws, honestly any of them you can buy in a store would be a good pick, you might need to square it up with a combination square but even the cheap ones cut through your board the same as an expensive one, you just get bells and whistles with the $$$$$ saws. Watch for ones on sale at the box store, be careful with Faceook Marketplace gems, my saw is 10+ years old, so is my dads and you wouldnt know truely how much wear and tear they have been through, id scout for a new one
You made this video fun to watch and earned a subscription! 🤩
Woohoo! Welcome to the community :)
Best part of the video 14.10 - 14.16
🤣🤣 heck yeah it is!!
I got that double cyclone setup. They had them in a package it works quite well. I no dust accumulating in my shop vac since I installed it about two months ago. It's nice that the second cyclone has clear bottle.
Nice! Im excited to install it and clean my shop vacuum filter less :)
A+ RUclipsr
Thanks for the kindness buddy :)
I like tools just bcuz I think they’re cool, also! 😆 The chamfer plane looks pretty cool! 👍 Great video- we even got serenaded! 👏🤘🌟
Chamfer plane was pretty cool, I sanded the red off the bottom because it left red paint on the wood -__- but its a fun little gadget
best ad video about tools ive seen
u have a talent
I tried to showcase different tools and how to use them since they were mostly inexpensive and the majority of them I didn't own :) thanks buddy
I bought a bunch of hand saws and small squares from them. They are great!
I tried to showcase different tools and how to use them since they were mostly inexpensive and the majority of them I didn't own :) overall not bad stuff, some of it was cheap, but I also didnt pay a lot :P
I’ve ordered several different things and no issues
This was my first time ordering, I found a miniature cross bow I want ;) lol
Does the enclosed face cover sit comfortably with glasses? I do a little lathework but I have glasses. I have the second face sheild you have but I still get hit in the mouth with chunks occasionally 😅
I dont think it made the final cut but I had the oversized glasses underneath the face shield and it fit just fine :)
I tried to go on TEMU once but I couldn't even get on there cuz there was so many pop-ups I don't put up with it I won't order from there
Their pop up game is ridiculously strong. 9 times out of 10 i "win", i just close it and find what I originally came to look up :P
Thanks for another entertaining and informative video ! Question : How long did it take to receive your temu order ?
It arrived in about a month, I didnt even know it was coming until UPS notified me :P
Looking forward to the cyclone setup! and i hope to see some of this interlocking thing!
Thanks buddy, im excited for the cyclone set up as well
I am new to your channel and I would like to know where you are from. I am a little new to wood working and doing you tube videos and are you on Facebook and I really like your videos. 😊
Im from central Illinois :) Happy building!
Loved this video!! On the flashlight, is the magnet maybe for storing it, just stick it to your toolbox so it's always handy?
Could be for storage, im not going to lie, Ive lost sleep over the magnet placement. Lol
its also for sticking this to whenever u want to a car while ur under it
16:00 Im going to make my dad use this first 🤣😂😂🤣
He fractal burns, he's livin life on the edge anyways lol
@@WhosTheVoss 🤣
Looking forward to seeing the cyclone setup. I have something I rigged together. It “works”, but not nearly as well as I’d like.
Im excited for it as well, doing the research now :)
Not gonna lie…I’m digging those mini screwdrivers.
🤣 they are adorable!
@@WhosTheVoss they are handy tools got them for my daughter's sewing machine for the cramp spots
I have one of those hand sanding hammers.
Ya know, I use it more that I thought I would. Glad I got one :)
Thanks bro for info…
Thanks buddy ;)
It’s been a few months, are they still working? 😂 I am always curious how long they last.
Wellllll, i use the sand hammer and drill press sanders quite often. The drill bits dull pretty dang quick, and I only use the planer for round overs. Although it was cheap, it held up okay :) a wee bit below Harbor Freight quality. I dont use any of this everyday or even every week, but it hasn't hit the trash can yet :)
I would strongly advise against buying things like plug cutters and sandpaper from them, even for so little. For that price you're going to be getting metal that goes dull in three applications, and I'd be willing to bet that that sandpaper will wear out even faster. I'll never buy anything from Temu because that whole "you get what you pay for" thing our parents drilled into us is very true. Especially in the shop.
If it's a "use it once or twice tool" this wouldn't be a bad spot to grab it, havnt used any of it in-depth to get a feel for if its good quality or not. This video was mainly to showcase what items are out there people might not own/know about :)
Unfortunately, a lot of what is on Amazon is from them or a similar site, for three to four times the price.
@@MissMolly3377 in south east asia its more little cheaper..
It's been over a year of using my hole cutting tools for my impact drill and must say they are still doing fine thank you temu
Nowadays everything is from China. Their products are getting better and better. Prices stay low compared to the western corrupt multinationals
you convinced me.
They are right there with the quality of harbor freight tools, good for hobbiest, not a professional tool, but i didnt pay professional prices either
Never had a problem with their products .........
I didnt have great luck with their drill bits, id change my answer about those. But everything else works pretty good
I've bought many things from them. A lot of it is just what you paid for. No more. Sometimes less😢. I have sent a lot of things back. Its a hit miss. One thing. Keep all packaging incase you have to send it back.
I tried to showcase different tools and how to use them since they were mostly inexpensive and the majority of them I didn't own. You do get what you pay for most definitely:P
you look like a blond version of Ed sheeran
🤣 i hear that everyday. I do have red hair, it sun fades in the summer ;)
I got a vacuum cleaner from temu and it sucked.
Liiiike vacuum sucked or bad sucked ;)
TEMU cheated me. I wish I did not singed up with them.
They are like harbor frieght; some stuff is alright, some is garbage 🤷♀️
Should have had a epilepsy warning before your amazing solo. lol
I said "watch out kesha"; she has epilepsy :P
14:53 not a "chuck." A "chuck key."
Thats why the little pop up counts into the negative for "chuck key" :P lol
@@WhosTheVoss I did not notice the reverseness.
their stuffs mostly junks. They automatically canceled my orders on items that on sale. OUt of 10 items bought returned 8
It does seem like when i save a link, its usually is expired and sold out before I get around to buying it :P
@@WhosTheVoss mine I have already purchased but then they just not shipping my orders then canceled. Only happened to more expensive items that on sale or one of those free offers.
For me no temu .
Some things are okay, most is cheapy junk. Gotta find those gems ;)
TEE-Mu, not TEMu
👍
It is teh-moo, they had a Superbowl commercial this year and we all said what? 😂