Free Energy

Поделиться
HTML-код
  • Опубликовано: 29 окт 2021
  • Hello Geniuses in this video i'm gonna show you How to Get a 35v from hoverboard wheel . You Can Make At Home its very Simple
    Hope you enjoy this Simple idea
    If you enjoyed don't forget to leave a like and a comment !and Subscribe to join channel . and enable notifications
    / mextraf
    Previous video 👇👇
    • Repair broken plastics...
    🔥 WARNING!
    If you copy anything you see in these videos, you do so entirely at your own risk and thank you .
    #The_Bright_Angle
    #mextraf
    #free_energy
  • ХоббиХобби

Комментарии • 45

  • @MadMaxprojects
    @MadMaxprojects 4 месяца назад

    Super

  • @JjMn1000
    @JjMn1000 2 года назад +4

    THERE IS NO FREE ENERGY… Except if you put in energy and pay for the power to run the drill

  • @heyderaliyev8976
    @heyderaliyev8976 2 года назад

    Great 👍👍👍

  • @JaviersDIY
    @JaviersDIY 2 года назад

    Nice project

  • @StefanReich
    @StefanReich 2 года назад +11

    "Free" energy as long as you put in a lot of energy :)

  • @amazonicscircuitri3762
    @amazonicscircuitri3762 2 года назад

    You can now install a windmill for that, agree 👍

  • @sahinkatecnologyinvention4986
    @sahinkatecnologyinvention4986 2 года назад

    Mextraf successful great

  • @electronic7979
    @electronic7979 2 года назад +1

    Nice

  • @youtubetv7000
    @youtubetv7000 2 года назад

    SUPER!

  • @valtersouzaribeiroribeiro9534
    @valtersouzaribeiroribeiro9534 2 года назад

    Parabéns muito bom

  • @user-mn4xv5cg3i
    @user-mn4xv5cg3i 2 года назад

    Молодец.иди возьми с полки пирожок.
    Сколько W,A выдаёт ваше чудо?

  • @Bianchi77
    @Bianchi77 2 года назад

    Like it, thanks for the video :)

  • @MrEleman
    @MrEleman Год назад

    Маловато. Учитывая готовые неодимовые магниты и большой размер. Нужна доработка по другой схеме.

  • @k.s.s.n1777
    @k.s.s.n1777 2 года назад

    நன்றாக இருக்கிறது👌👏💐

  • @rajendranparakkal7335
    @rajendranparakkal7335 2 года назад

    ഐഡിയ സൂപ്പർ താങ്ക് യു സാർ

  • @kanguruster
    @kanguruster 2 года назад +4

    Overlay says "3.3k uF 100V capacitor" (actually it uses "uf" and "v" but I don't think poor capitalisation makes that much difference) but the video is of a 16V cap. This is the second video I've seen of Mextraf's that does this. I'm only an amateur so is there something I'm not understanding about this?

    • @Mextraf
      @Mextraf  2 года назад

      K = 1000 --> 3.3 x 1000 = 3300
      I use a 16V 3300uf capacitor , because it was available to me And i wrote 3.3k and 100 volts so that the capacitor does not explode on whoever will apply this idea !!

    • @kanguruster
      @kanguruster 2 года назад

      @@Mextraf Thanks for thinking about the safety of your viweres. Good job!

    • @tookitogo
      @tookitogo 2 года назад +4

      ​@@Mextraf 1. Stick to standard notation. Nobody uses k with capacitors, since the values practically always are less than 1 farad (and never, ever go up to the thousands -- a kilofarad would be _insanely_ huge). (Only supercaps have >1F capacitances, but still within single digits, and only at low voltages!) So if you have a thousand of a much smaller division, like uF, you just move up to the next prefix. Here, that'd be 3.3mF (millifarad). You wouldn't say 4.7kpF, you'd simply say 4.7nF.
      2. Don't be so sloppy with capitalization. Kilo is k (not K), farad is F (not f), etc. It matters, because some letters (like m) mean different things depending on capitalization: 1M ohm and 1m ohm are both real-world values that actually get used, and they mean wildly different things. (They differ by a factor of 1 billion.)

  • @davidmorris-jones210
    @davidmorris-jones210 2 года назад

    The capacitor was rated only 16 volts not 100 & the voltage generated is exceeding 16 volts. That cap will blow.

  • @user-sv8uv1oq1d
    @user-sv8uv1oq1d 2 года назад

    Идея интересная чтобы использовать преобразователь

  • @awishkaakalanka7751
    @awishkaakalanka7751 2 года назад

    😍💙🙏

  • @ChuckYoung75
    @ChuckYoung75 2 года назад

    Or you can hook that drill battery to the booster and run the led.

  • @binloveds
    @binloveds 2 года назад

    I do not have any experience with electronics but could electric cars be set up to charge as you drive with this kind of set up?

    • @1boobtube
      @1boobtube 2 года назад

      binloved no that would only work if you used it for braking.

  • @idontsleepidream
    @idontsleepidream 2 года назад

    Soooooo... not free energy, at all. Lol. Got it

  • @sanasafg1887
    @sanasafg1887 Год назад

    ok

  • @user-db4xh4yb2p
    @user-db4xh4yb2p 2 года назад

    16v!!!

  • @arielbene2013
    @arielbene2013 2 года назад

    Is the drill battery charging also free??,,,,,,,,

    • @rogerbarton497
      @rogerbarton497 2 года назад

      He bolts the wheel back on to his hoverboard and scoots round the neighbourhood for a couple of hours to charge the drill.

  • @alejandrovillan6358
    @alejandrovillan6358 2 года назад +1

    Sirve para cargar celulares?

    • @Teknopottu
      @Teknopottu 2 года назад

      Step down converter set to 5V

  • @Nonononono_Ohno
    @Nonononono_Ohno 2 года назад

    Free energy. Feel free to rotate my generator wheel.

  • @patty1991
    @patty1991 2 года назад

    😁 dynamo, Inverter 230v, motor 😎win
    😀 or: Akku, Inverter 230v, charger, motor

  • @mangjay80
    @mangjay80 2 года назад

    For wind turbine

  • @electronicajean727
    @electronicajean727 2 года назад

    como sacar placa CPU conector hembra 24 pines

  • @jackarrows1436
    @jackarrows1436 2 года назад

    🎃💉

  • @kanguruster
    @kanguruster 2 года назад

    Got to love the point-to-point wiring rather than racing off to a PC to design a file to send to JLCPCB!

  • @shaunmorrissey7313
    @shaunmorrissey7313 2 года назад +1

    There is no such thing as free energy

    • @rogerbarton497
      @rogerbarton497 2 года назад

      Depends how you wire up your electricity meter 😉

  • @petergabler9610
    @petergabler9610 2 года назад

    Unfug

  • @MadMaxprojects
    @MadMaxprojects 4 месяца назад

    Plese i need your help can we talk ?

  • @faragihicham7216
    @faragihicham7216 2 года назад

    Nice