Niiiice. Just ordered my 20t (went with Robinson Racing RRP8720 for those wondering, since the 3s Arrma 20t is sold out everywhere) and Hot Racing Adjustable motor mount. Being a newbie I was hoping there was a how to video out there and sure enough, there is. Thanks for the info, look forward to your future vids.
I'm glad this helped u out, I have a few How To vids n more coming since its winter here in Detroit, I got to get the hot racing motor mount, they were sold out last I checked
Im going to get the Typhon as my first rc car. I was worried about changing to a bigger pinion as i know absolutely nothing about things like that. Im now alot more comfortable with doing this myself. Thanks bro!
@@STEVOD313 sorry to ask another question but does changing the pinion void the warranty? I've also heard the spectrum supplied is poor? Is it easy to change it over?
Good tip on the guerilla tape....I lost drive on my typhon 3s and need to get in there and see what broke. Your vid is going to help with tear down. Thanks for posting it!
@@STEVOD313 got it torn down and the plastic spur gear teeth are chewed smooth by the metal pinion. The buggy is all stock. Any idea on a metal replacement?
@@STEVOD313 lots of problems...got the HR metal spur gear installed but I think the original problem was with the motor as the main shaft is wobbling around and not making happy sounds bench testing under power. I think the motor went bad first causing the shaft to wobble and then the metal pinion ate the plastic spur gear. Boom then she no go no mo.
@@hoofixrman Sounds like a bearing in the motor failed, someone else told me they had this issue too n I told them to contact horizon hobby cus its under warranty n they did n they r getting a new motor sent out to them, so thats what id do
@@rockyrc9942 Awesome n welcome to the hobby! If ur around tonight at 9:30pm eastern standard time I do a live rc hangout, I do it every friday at the same time, theres a lot of good rc channels that join n also we answer any questions u might have n talk rc. Its a good time, hope to see u there
STEVO D 313 ya it never ends. The wife nearly had a heart attack the other day when she went into one of or spare rooms there was truck parts everywhere.
😁 everyone these day...I am just going to put one of those cheap $20.00 20KG servos in here! I found that the arrmas after you use em a bit those modulus can be a pain to get apart because small dirt debrise gets in the sliding parts and they get jammed together hard as heck to slide apart from it. anyhow you got her all done up so that's good!
@@rcplayer7581 its probably the one I just put into my big rock, ive got a video on it, amazon specials we call them 20kg servos n comes with aluminum servo horn
Ya I thought I had less money then I had n got the sway bars with just the one thickness sway bar, It might be the medium or stiffest but should be an improvement when I install it
Right on Stevo D 313 just what i needed thank you very much for showing us step by step and the importance of how to install a pinion i bought the 20t as well but havn't put it in my typhon yet cant wait too see what it do 👊🏾👊🏾
Heck ya thats awesome, I was hoping this video would help people out n im glad its gonna help u, just know the first time u gotta take it apart it might fight u but just dont give up u will get it eventually
You know I love you bro no matter what. You been my true real brother for 20+ years. Your family! Glad to see you again. Anywho got the arrma limitless coming in today powering it with a new castle xlx esc and tp power 4070cm. Should be a blast. Ordered the new Futaba 7pxr radio excited about that. Gonna replace my DX5PRO. Been running up at freedom hill rite by my house we should hang sometime blast the builds around!
Sitting at home waiting on UPS to bring my limitless. Got the xlx esc yesterday. Got custom made wheelie bar and xlx mount for the limitless some other stuff coming. Shipping delays are killing me rite now.
I couldn't get me Senton motor 'module' off, gave up in the end lol. May be I just needed to be a bit more aggressive with it! That's gonna be pretty quick now!
@@STEVOD313 The first time I took my Granite loose it took me a mini pry bar and an hour of working with it till it came apart. The first time it went back together the wheels would barely turn, when I took it back apart and put it back together it was perfect. I have only ran mine on-road but I never thought about grit building up under the module
@@CallMeAdam2023 Ya man it took me a big ass screw driver n a smaller screw driver to get it loose, it was making me mad cus it was suppose to be easy but it wasnt easy for me, I thought I was doing it wrong or something but I see a bunch of guys had the same issue
I bought a robinson racing pinion gear, and it's hitting on the slot of the gearbox, and it's an 18th pinion gear, it's on the edge of the cover inside what's the best thing to do? It's not closing the cover to properly sit in place.
Stevo- I stripped the screw in the 15 pinion gear trying to take it off. I'm a novice with RC's. Any suggestions on how to get that screw out to upgrade to 25 pinion gear?
Ya Ive got a bin with pinions n separate them by what pitch n 3.175mm or 5mm shaft holes, cus I can use them on other trucks I have but ya labeling is always good to do
I'm trying to do this right now but the 20t holes on the motor cover are not lining up. If I am able to line up 1 hole, the esc/receiver is crooked and not level on the chassis. Don't know what I'm doing wrong
This is weird, I have a Granite 3s BLX I just bought about 3 weeks ago, I bought a 13t pinion because I wanted to switch the gearing. When I removed my cover the only holes I have are 15/20/26. When I look at the part for sale online they all have the 13t hole. I can't figure out why mine is the only one I have seen that doesnt have the 13t hole
mine both big rock n typhon have the same 15/20/26 this is why I got the 20 for my typhon n my plans is to get a 17-18 for my big rock since its a 15 tooth stock, but u need the hot racing motor mount plate to fit whatever pinion size u want, right now they r out of stock, I had 2 in my shopping cart n went to buy next day n they were out of stock, but ill be getting them when they r available again
@@STEVOD313 I dont have the money at the moment, but I found them www.amazon.com/dp/B07LCSTG6L/?coliid=I1DIP5MC3WOLP&colid=3RAOTFXLPY8GQ&psc=0&ref_=lv_ov_lig_dp_it Hopefully you get it before someone else sees the link
Youre going to want to set your ounch setting to 4 for this pinion. There will be a small amount of cogging off the line but great advantage top end. Awesome video very informative! Thanks!
@@STEVOD313 i dont know if i have a different esc but in the setting i get 1 beep, 2, 3, 4 then back to 1 so mine seems to be max at 4. Idk. Ill have to try again but thanks again for the awesome video.
I've heard a couple people say that hot racing bellcrank helps the steering slop a lot, I plan on getting one myself for my senton, my first upgrade is I just ordered a sealed bearing kit from Jim's bearings, well I guess it will be my second upgrade since I put a JX 20kg servo in all my rigs but I did that before I even powered it up for the first time. Next upgrade will be the hot racing bellcrank then the hot racing aluminum pivot ball set and maybe a t-bone front and rear bumper and then probably the hot racing front and rear hub carrier's and the front steering hubs, I plan on decking my senton out.
Ohhh Rustler Sway bars! I got that steering rack too!! Man, I wish I knew you needed a 20t pinion. I bought one by mistake cuz the Senton comes with the 20t not the 15.
My power module had so much mud and grit It was impossible to remove by hand. I had to wedge it out levering from the back a little at a time left and right to get it out. I still like that design though, I'd rather it be tight than loose! ;)
Haven't Alma granite 550 I want to switch the pinion in the slip gear but I don't know which ones to get for both I got two different size one size for the pinion one says for the slipper can you help me
Is that plastic piece on slipper needed, mine is missing also when finished installing since it’s stock predefined messing should it sound like it’s clicking when rolling
Hey bro,Im new to the rc 🌎 and just got a outcast 4s! the pinion gear came loose on me so truck wouldn't budge on 2nd run,So opened it up to tighten her back down which noticed had No locktight at all on grub screw.But my question is does it matter how far down on motor shaft I set the pinion gear? Is there a certain spot to tighten it down on motor shaft,Or does really not matter long as it threadlocked tight? Thanks in advance bro! ✌
Yes it matters, u have to make sure its in the spot were the spur gear lines up with it , otherwise u could be to high or low n not lining up with the spur
Thanks a lot bro I appreciate ur support n glad it helped. The 20 tooth really did make a difference in speed, it was quick before but now its an animal! LOL
Hi Steve. I went to change my 20 tooth to a 26 tooth today. When i tried to get the screw out that holds the pinion in place, I found that the allen key just turns inside it. I've no idea if I can get it out as there seems to be no way to get the screw out. Any ideas mate?
@@STEVOD313 btw I dig your vids so far on the arrma how tos and upgrades.. you seem like a kool bro.. keep em up sure it helps alot of people out. Btw I own 2 stadium trucks rusty the rustler lol my ecx amp (modified) with a castle 3800kv two monster trucks my redcat TRMT10E and my hpi savage xs.. and my latest purchase the Typhon 3s blx 1/8 scale buggy.. or should I say truggy?? Haha.. hope that dont make me sound like a tool.. sure you have a nice collection of rc yourself.. I just wanted to share what I had on the shelf lol.. and rc friends are always good to have.. most of my friends dont know about it or not interested in it or simply can't afford it cuz as you know it's not a cheap hobby..
@@RcbasherNcrasher13 Ya man thats a nice collection for sure n lots of $$$ to own nice rigs like that. The how to vids r coming since its winter n ive got a bunch of upgrades I never installed, I know the vids r not that interesting if u dont own that model but I am making them to help out the guys who do have them. Lots of upgrade vids coming for 4wd rustler, 2wd rustler, v3 kraton, UDR, Xmaxx, 2 ecx rigs, n more, so im sure if u have some of the same rigs these vids should help out, thanks for ur support bro
@@STEVOD313 yeah I order it from amain. Paid rush processing and overnight shipping with the before 10 a.m. delivery. You almost have to these days with the way these shipping delays are gettn worse & worse.
Cool man some much needed and very good upgrades brother 👌 I know that feeling when you finally free up some of those awkward motor mounts 😂 have you had to remove an arrma 6s motor mount yet 😨😂 make sure you have a good beer on hand ready to celebrate the moment if you ain't already dude hahaha 👍🤘😲💪
Oh for this stevo i got impatient ordered stock granite parts im ordering extenders and mx28s from tower today. For the br i missing thousands dollars rcs parts from moving mostly traxxas rigs but parts and futaba remote hurts brother
Great stuff Stevo 👌!!! That slipper/motor assembly is a bitch to pull off 😨. A big screwdriver definitely helps 👊. Was going to mention, the 3 slipper cover screws lock into the motor mount aluminum after the plastic. Not a bad idea to threadlock them too. You're going to haul complete ass with the 20T😱!!!! Simply no other way to do it 😍. The Typhon just plain rips😰😰😲. Great upload Bro 👊. Gonna help lots out there. 🍻🤘🤘😎💪👊👊
@@STEVOD313 don't sweat it Bro👊. Sadly, I miss comments regularly 😲. Happens despite even checking for them. Sometimes I see them 6-12 months later 😱....Lol. I'm hoping to get my Typhon back out again soon 😍. Thing just Rips something nasty 🏎️💨💨
Watching you take the motor out was highly entertaining. “When in doubt get a bigger screw driver” 😂 Plus the little extras you edited in were fun too. Sometimes when I have to tear down and rebuild a vehicle and it works, I feel like I can take on the world! Where do get the “blue” locktite? Is it just superglue?
no its a blue threadlocker that isnt permanent, so u can get it a part again, the red threadlockers is more permanent n requires heat to be able to remove again.If ur looking for some just look up blue threadlocker or blue locktight
Entertaining and informative vid bro! 😎 Good idea on the gorilla tape under the spur. Going to have to do that next time it's apart! Would you be interested in a sticker once I get them in? Finally got some made!😀💪👊🤘🤘
Oh shit i forgot i need lock tight.. ok well ill have to take the screws ti the motor mount and pinion later 😂 good thing i didnt take them out just now. I was onlyy doing this just to give the gig gear and ponion gear just a bit of space so it will roll better because it needs a bit of force to really roll it back and forwards. Pretty sure you just gonna break it in alot but its maybe also normal to have it like this but in kinda consernd lol
Not 1st but Never Last🎉❤️🎉Whooo hooo Bitch was like stop I want to stay🤣🤣🤣 I actually started watching this days ago!! And just been Busy🎉🎉🎉 Lock tight!! No Joke!!
IDK how I didnt see this comment, I thought u didnt watch it cus I didnt remember seeing ur comment, but I'm glad I see u were here n thanks for that HLL, u rock girl n I dont want beef well only for dinner lol
Hi Steve. I think youtube cut me outta you party. I checked to see if You were still on my site. Yep. I get your videos. Ax hasn't been getting them either.
Someone in your chat nights said you tube gets kinda stinky about copyrighted music. I'll try posting that I purchase the music I use. A buck or two is worth to me. Oh well it is what it is. Wow!! you're almost at 2K.
When you do this guys motor. It's alot easyer. And please get that hot racing motor mount it is so much better then that fixed Mount. Great Video BTW I did this all by myself. What a bitch sliding the motor out. Took me over a hour since I had to take breaks 😃
After 1hr n some change n rewind this video finally got it lol. Typhon 3s is flying the the street with the 20t pinion. Thanks for the help brah!!!
I'm glad to help n ya the 20 tooth pinion really makes it fly!
Thanks brother from the 313!!Got in my 20t pinion and my new HR adjustable Motor-mount back togerther!
Right on! Glad it helped
Nice , very good work , excellent upgrade !! Great video !!
Thanks Pascal I hope it helps someone
😊👍👍@@STEVOD313
Just got my Typhon today...What a blast. Huge differnce from messing around with wltoys. Thanks bro
Oh ya most definitely, different ball game lol congrats on ur new rig, enjoy!
I enjoyed that, I like seeing this modern stuff and it looks cool to work on 😎👊🏻
Ya man I know u were thinking about this buggy n id say I think u would enjoy it
TYPHOON is a storm. TYPHON is a monstrous serpentine giant and the most deadly creature in Greek mythology. 🐍 Great Video!
Wow I did not know that, then thats a perfect name for it
Loosen three screws,not one but three lol,cool upgrades,love the video👍👍👍👍👍
yes 3 🤣definitely 3 lol
Good video,worked for my 4s outcast! My non sealed bearings were toast, and it caused driveshaft to lock up.
ya idk why arrma doesnt use the rubber shielded bearings, glad u got ur outcast fixed
Thanks for all the info man most you are the most helpful when it comes to the big rock thanks much appreciated
Thanks bud im glad the video helped out
Niiiice. Just ordered my 20t (went with Robinson Racing RRP8720 for those wondering, since the 3s Arrma 20t is sold out everywhere) and Hot Racing Adjustable motor mount. Being a newbie I was hoping there was a how to video out there and sure enough, there is. Thanks for the info, look forward to your future vids.
I'm glad this helped u out, I have a few How To vids n more coming since its winter here in Detroit, I got to get the hot racing motor mount, they were sold out last I checked
Im going to get the Typhon as my first rc car. I was worried about changing to a bigger pinion as i know absolutely nothing about things like that.
Im now alot more comfortable with doing this myself. Thanks bro!
Anytime, i'm glad it helped n ur gonna love the Typhon its a great rig!
@@STEVOD313 Thanks man
@@STEVOD313 sorry to ask another question but does changing the pinion void the warranty? I've also heard the spectrum supplied is poor? Is it easy to change it over?
@@donuttime2507 Changing pinion should not void the warranty, the spektrum STX2 is not the best remote n its easy to upgrade to a better one
@@STEVOD313 Thanks bro. Im excited now. Thanks and take care.
Good tip on the guerilla tape....I lost drive on my typhon 3s and need to get in there and see what broke. Your vid is going to help with tear down. Thanks for posting it!
I hope u get it fixed up n im glad the video helped
@@STEVOD313 got it torn down and the plastic spur gear teeth are chewed smooth by the metal pinion. The buggy is all stock. Any idea on a metal replacement?
@@hoofixrman I think hot racing has one, not sure part number but just google it n u should find it
@@STEVOD313 lots of problems...got the HR metal spur gear installed but I think the original problem was with the motor as the main shaft is wobbling around and not making happy sounds bench testing under power. I think the motor went bad first causing the shaft to wobble and then the metal pinion ate the plastic spur gear. Boom then she no go no mo.
@@hoofixrman Sounds like a bearing in the motor failed, someone else told me they had this issue too n I told them to contact horizon hobby cus its under warranty n they did n they r getting a new motor sent out to them, so thats what id do
Hey man I got myself a typhon 3s a few weeks ago and seen how fast they can go with a 20t pinion thanks for the video
Glad I could help
@@STEVOD313 you helped me alot with the vids bro thank you just getting into the hobby
@@rockyrc9942 Awesome n welcome to the hobby! If ur around tonight at 9:30pm eastern standard time I do a live rc hangout, I do it every friday at the same time, theres a lot of good rc channels that join n also we answer any questions u might have n talk rc. Its a good time, hope to see u there
Miss'n you Broski. Had to get my StevO fix! Seems like yesterday. 👊🏁
Awesome a lot of steps to go through
ya its fun working on rc's so I dont mind
STEVO D 313 ya it never ends. The wife nearly had a heart attack the other day when she went into one of or spare rooms there was truck parts everywhere.
@@seansrcconstruction LOL oh no, that is hilarious though
😁 everyone these day...I am just going to put one of those cheap $20.00 20KG servos in here! I found that the arrmas after you use em a bit those modulus can be a pain to get apart because small dirt debrise gets in the sliding parts and they get jammed together hard as heck to slide apart from it. anyhow you got her all done up so that's good!
Ya I noticed some sand n grit in the slots n made it a pain to get apart but I finally got it
I think i paid 17 and came with nice horn for my outcast 30kg i think
@@rcplayer7581 its probably the one I just put into my big rock, ive got a video on it, amazon specials we call them 20kg servos n comes with aluminum servo horn
Appreciate the video my man, I just grabbed the 3s Typhon, I’m putting a 18T pinion on it, now I know I need the adjustable motor mount 💪🏾
ya I put the 20 in mine so I didnt have to have the adjustable motor mount n its an animal
Reminds me too loosen my sway bar fixings. That steering bellcrank looks nice!
Ya I thought I had less money then I had n got the sway bars with just the one thickness sway bar, It might be the medium or stiffest but should be an improvement when I install it
Great video bro. Gonna help out a lot of people
Thanks Ben thats what I was hoping for
I have to change mine that came with it for the Tyhpon 6s. Great Vid 313 👍👍👍👍👍👍👍
Thanks big Lou, ya man the 6s is gonna fly
Right on Stevo D 313 just what i needed thank you very much for showing us step by step and the importance of how to install a pinion i bought the 20t as well but havn't put it in my typhon yet cant wait too see what it do 👊🏾👊🏾
Heck ya thats awesome, I was hoping this video would help people out n im glad its gonna help u, just know the first time u gotta take it apart it might fight u but just dont give up u will get it eventually
@@STEVOD313 Right on brotha will do 👍🏽👍🏽
Helped me out tonight!! Thanks big guy
Awesome thats good to hear, thanks for checking it out
I'll have to buy one now so I can change the pinion. 😉😉 Great step by step !👍
Ya man its quick with the 15 tooth, the 20 is gonna be insane
Very informational my friend. I love it, 😂always putting a smile on my face Stevo, keep up the good work! Much support always👊💯🔥😎
Hey theres my boy! Its almost the weekend! Thanks bro Im hoping it helps people in the future
StevoD in the work bench. OMG lord Jesus. Haha that was funny.😎👍
LOL Ya Gabe it was fighting me but I won 🤣
Good job and nice upgrades 👍 That looked like a little bit of work getting it back together hehe
Ya she fought me but it got done lol
You know I love you bro no matter what. You been my true real brother for 20+ years. Your family! Glad to see you again. Anywho got the arrma limitless coming in today powering it with a new castle xlx esc and tp power 4070cm. Should be a blast. Ordered the new Futaba 7pxr radio excited about that. Gonna replace my DX5PRO. Been running up at freedom hill rite by my house we should hang sometime blast the builds around!
I'm subbed up to ur channel now, but still trying to figure out who this is?
@@STEVOD313 Mustang mike
@@detroitrcwurks998 Machanic Mike? One I bought mustang off of? Old roommate in house off 9 mile?
@@STEVOD313 yes sir lol
Sitting at home waiting on UPS to bring my limitless. Got the xlx esc yesterday. Got custom made wheelie bar and xlx mount for the limitless some other stuff coming. Shipping delays are killing me rite now.
No grease on the pinion and spur before closing?
cool, although whenever im trying to pull the gear off, it won't budge, is there something i need to do?
Awesome brotha, working on RCs is fun!
Workshop Wednesday lol
Sunday = Stevo's rest day!
Monday = Mail Call
Tuesday = Tamiya
Wednesday = Workshop
Thursday = Traxxas
Friday = Arrma
Saturday = Live show.
What do you think ? lol
@@jdpaslRC LOL ya one day of the week for everything lol
@@STEVOD313 then you will be biggest legend on RUclips!!!
I clean my transmission after every two runs..Good stuff bro.
Ya im sure its gonna be easier to pull apart now that Its been apart
@@STEVOD313 First time apart I used a flat head too lol
@@philthyco1 ya man that thing was on there tight bro, it was digging into my fingers n ya a screwdriver was definitely needed lol
@@STEVOD313 Once you do it as many times as I have it becomes second nature lol
Awesome brotha👍 cheap 20KG servos works great.i just order 4 of them for my new trucks.
Ya I have a few of them, back when they had a 48 hour sale on Amazon for the $4.50 each, so I figured I would pick a few up for that price
That Typhon is a wicked car...! Nice mail call and upgraded.! You might need a tiny fan to cool things down in the shop.. LOL
LOL Ya ive got one n needed it this time this thing had me sweating LOL
I couldn't get me Senton motor 'module' off, gave up in the end lol. May be I just needed to be a bit more aggressive with it! That's gonna be pretty quick now!
Ya bro I was about to give up on it myself, in the end it took 2 screwdrivers to get it loose, one to pry tab up n the other to ply it out
@@STEVOD313 The first time I took my Granite loose it took me a mini pry bar and an hour of working with it till it came apart. The first time it went back together the wheels would barely turn, when I took it back apart and put it back together it was perfect. I have only ran mine on-road but I never thought about grit building up under the module
@@CallMeAdam2023 Ya man it took me a big ass screw driver n a smaller screw driver to get it loose, it was making me mad cus it was suppose to be easy but it wasnt easy for me, I thought I was doing it wrong or something but I see a bunch of guys had the same issue
badass steveo looking forward to the hot racing install.
Ya I hope they get back in stock soon cus I got the last one n its going in the big rock n next ones going in the typhon
I bought a robinson racing pinion gear, and it's hitting on the slot of the gearbox, and it's an 18th pinion gear, it's on the edge of the cover inside what's the best thing to do? It's not closing the cover to properly sit in place.
Stevo- I stripped the screw in the 15 pinion gear trying to take it off. I'm a novice with RC's. Any suggestions on how to get that screw out to upgrade to 25 pinion gear?
Superb video mate and many thanks #SteveoD from the 313!!
Thanks so much bro i'm glad u liked the video, n thank u for watching!
Awesome Brother, ,, still waiting for my typhon
Oh dang, ya my hobbyshop said they were on back order, but hopefully u get urs soon
@@STEVOD313 amain says its on the mail last night
@@operation11charlieinc awesome
Nice work bro! You reminded me that I need to order some better steering bell cranks for my Notorious. Sometimes wrenching is a struggle lol.
LOL ya being so new it was super tight n wanted to fight me but I won cus its done 🤣
Hey do u remember what size tools u used?
So my pull tab just snapped in half when I was trying to pull the motor.
Just what I needed, thanks.
Tag with string on the spare pinion write the size and truck.
Ya Ive got a bin with pinions n separate them by what pitch n 3.175mm or 5mm shaft holes, cus I can use them on other trucks I have but ya labeling is always good to do
Oh yea nice man nice. 👍 now that I remember lol badass rings 😎👍
Thanks bro, they r my knuckle busters lol
@@STEVOD313 👊
Hey bro what is the difference between the 48 p Pinion gear and 0,8 mod ?? Because i dont know what it fit in my arrma 3s. ✌🏻
Nice. Thanks for the information.
Thanks for watching, I hope the video will help some people
I'm trying to do this right now but the 20t holes on the motor cover are not lining up. If I am able to line up 1 hole, the esc/receiver is crooked and not level on the chassis. Don't know what I'm doing wrong
There should be 4 holes on the motor, sometimes if u try a different two holes it should line up
Very nice toolbox big thumbs up my friend XD
Thanks my friend
I have literally tired so many things to get the motor assembly out and I just can’t get it
This is weird, I have a Granite 3s BLX I just bought about 3 weeks ago, I bought a 13t pinion because I wanted to switch the gearing. When I removed my cover the only holes I have are 15/20/26. When I look at the part for sale online they all have the 13t hole. I can't figure out why mine is the only one I have seen that doesnt have the 13t hole
mine both big rock n typhon have the same 15/20/26 this is why I got the 20 for my typhon n my plans is to get a 17-18 for my big rock since its a 15 tooth stock, but u need the hot racing motor mount plate to fit whatever pinion size u want, right now they r out of stock, I had 2 in my shopping cart n went to buy next day n they were out of stock, but ill be getting them when they r available again
@@STEVOD313 I dont have the money at the moment, but I found them www.amazon.com/dp/B07LCSTG6L/?coliid=I1DIP5MC3WOLP&colid=3RAOTFXLPY8GQ&psc=0&ref_=lv_ov_lig_dp_it Hopefully you get it before someone else sees the link
Awesome they r back in stock, im gonna grab a couple now
You rock! I don’t know how you know how to use all these parts lol 😂 ❤️
Im a genius dont u know LOL
Youre going to want to set your ounch setting to 4 for this pinion. There will be a small amount of cogging off the line but great advantage top end. Awesome video very informative! Thanks!
Punch**
Yes very true, I have my punch set to max which is 5 n it moves!
@@davidjaminsky Thanks for watching
@@STEVOD313 i dont know if i have a different esc but in the setting i get 1 beep, 2, 3, 4 then back to 1 so mine seems to be max at 4. Idk. Ill have to try again but thanks again for the awesome video.
@@davidjaminsky Thanks bro, I appreciate ut
Nice job brother!
Thanks bud, hoping it helps people in the future
Nice job Stevo! 👍
Thanks bro Im hoping its gonna help guys out
I've heard a couple people say that hot racing bellcrank helps the steering slop a lot, I plan on getting one myself for my senton, my first upgrade is I just ordered a sealed bearing kit from Jim's bearings, well I guess it will be my second upgrade since I put a JX 20kg servo in all my rigs but I did that before I even powered it up for the first time. Next upgrade will be the hot racing bellcrank then the hot racing aluminum pivot ball set and maybe a t-bone front and rear bumper and then probably the hot racing front and rear hub carrier's and the front steering hubs, I plan on decking my senton out.
sounds like u have a lot of the same plans for urs, once its done up its gonna be one sick ride
Hi Stevo - Just got a Typhon and want some speed.... how much faster is it with the 20t pinion?
Ohhh Rustler Sway bars! I got that steering rack too!! Man, I wish I knew you needed a 20t pinion. I bought one by mistake cuz the Senton comes with the 20t not the 15.
Oh dang well now u got a spare, thanks for checking the vid out bro, ya I wanna see how the rustler drives with these sway bars on there
@@STEVOD313 Yes sir! I need to see if I need it 👍
Nice Stevo, good info!
Thanks Michael I hope it helps people
Nice one Stevo 👍🏻👍🏻
Thanks for watching bro
My power module had so much mud and grit It was impossible to remove by hand. I had to wedge it out levering from the back a little at a time left and right to get it out. I still like that design though, I'd rather it be tight than loose! ;)
Ya I had to pry it with 2 screw drivers
Haven't Alma granite 550 I want to switch the pinion in the slip gear but I don't know which ones to get for both I got two different size one size for the pinion one says for the slipper can you help me
keep the spur gear the same n change the pinion up 2 teeth, for example if u have 15 tooth pinion get a 17 tooth for more speed
Is that plastic piece on slipper needed, mine is missing also when finished installing since it’s stock predefined messing should it sound like it’s clicking when rolling
yes all pieces r needed for the slipper to work n no clicking sound should be heard
Do you know if this would be the same steps on the 6s
I dont think its the same
Okay thanks
I put a 15kg Kraton servo. No problems so far. Quick enough for me
Thats awesome, im glad its working out for u, bash on basher!!!
Please post video when you install the bellcrank
I do have the bellcrank video
😆😆😆 Damn.... that was a pain in the A..... 😃 Nice job StevO 😉👍🏻
in the capital ASS!!!! LOL
Hey I haven't gotten my 20tooth yet but would u say its hard to keep the front end on the ground with that in it
No its controllable dont worry ur like the speed
Hey is ok if I put the 20t pinion on stock motor I mainly want more speed on bmx dirt track
Yes I have my stock motor with the 20 tooth pinion on it n it definitely wakes it up n flys
Nice! just need a run test that 20t out🤛
I need another Typhon in my life!!
I sold my 6s v1 for instant regret but I did get a Talion though 👍✌️
Oh nice Tailons r bad ass, ive got the v3 Kraton n love it. Ya I wanna test the 20 tooth but still waiting on a new A-Arm
Hey bro,Im new to the rc 🌎 and just got a outcast 4s! the pinion gear came loose on me so truck wouldn't budge on 2nd run,So opened it up to tighten her back down which noticed had No locktight at all on grub screw.But my question is does it matter how far down on motor shaft I set the pinion gear? Is there a certain spot to tighten it down on motor shaft,Or does really not matter long as it threadlocked tight? Thanks in advance bro! ✌
Yes it matters, u have to make sure its in the spot were the spur gear lines up with it , otherwise u could be to high or low n not lining up with the spur
Great video
Thanks bro, I hope it helps people in the future
@@STEVOD313 I'm sure it will
hi stevo d have you seen blx 120 ever just stop working and the car doesn't turn on
No I haven't, i've not had any issues with mine so far
20t, nice. The typhon's gonna fly.
Oh ya I thought it was quick with the 15 in it, but the 20 is gonna be wow
Good video mate that’s helped me out massive , did it make much difference to speed , just subbed as well count me in 👍🏽❤️
Thanks a lot bro I appreciate ur support n glad it helped. The 20 tooth really did make a difference in speed, it was quick before but now its an animal! LOL
Awesome brother ...
thank u homie Heath!
Hey stevo, is that 20 tooth part# the same as for the big rock crew cab 3s?
Yes its the same
I didnt use the arrma, I used Robinson Racing harden steel pinion, the link for it is in the description
Is the car a lot faster than the stock gearing?
On the typhon I got 20 tooth n it flys, big rock 18 tooth coming, rustler 4x4 I put 14 tooth n its a lot faster too
Good explaination Stevo, I know that the motor pull out are very hard to extract and too much lock tite on motor bolt :)
Ya bro it was fighting me LOL but we got it done, thanks for watching
Hi Steve. I went to change my 20 tooth to a 26 tooth today. When i tried to get the screw out that holds the pinion in place, I found that the allen key just turns inside it.
I've no idea if I can get it out as there seems to be no way to get the screw out.
Any ideas mate?
u have to drill it out
Someone may have asked this but do you have the part # for the hot racing aluminum belcrank? Thx.. I also have the typhon 3s blx..
ATF4801 is the part# I also show how to install it on my latest video, in the big rock which will be the same as the typhon
@@STEVOD313 thx alot bro.. I've been trying to find the bushing size to upgrade them to bearings .. but that will work even better..
@@RcbasherNcrasher13 no problem bro
@@STEVOD313 btw I dig your vids so far on the arrma how tos and upgrades.. you seem like a kool bro.. keep em up sure it helps alot of people out. Btw I own 2 stadium trucks rusty the rustler lol my ecx amp (modified) with a castle 3800kv two monster trucks my redcat TRMT10E and my hpi savage xs.. and my latest purchase the Typhon 3s blx 1/8 scale buggy.. or should I say truggy?? Haha.. hope that dont make me sound like a tool.. sure you have a nice collection of rc yourself.. I just wanted to share what I had on the shelf lol.. and rc friends are always good to have.. most of my friends dont know about it or not interested in it or simply can't afford it cuz as you know it's not a cheap hobby..
@@RcbasherNcrasher13 Ya man thats a nice collection for sure n lots of $$$ to own nice rigs like that. The how to vids r coming since its winter n ive got a bunch of upgrades I never installed, I know the vids r not that interesting if u dont own that model but I am making them to help out the guys who do have them. Lots of upgrade vids coming for 4wd rustler, 2wd rustler, v3 kraton, UDR, Xmaxx, 2 ecx rigs, n more, so im sure if u have some of the same rigs these vids should help out, thanks for ur support bro
Could I out a 19 tooth and put it on the 20 slot
No the mesh wont work
Stevo you know any local hobby shops by us that have the Futaba 7pxr radio in stock. I want to get this radio this friday.
Larry's performance rc
@@STEVOD313 yeah I order it from amain. Paid rush processing and overnight shipping with the before 10 a.m. delivery. You almost have to these days with the way these shipping delays are gettn worse & worse.
Sweet vid my friend ive got the granite but need a back up basher how do you feel about your big rock is it on par with the granite for bashing👍👍💣💣
Well I've never drove the Granite so I couldn't compare the 2 but the Big Rock is very on par for my bashing likings
@@STEVOD313 sounds good to me i will save up for one
Cool man some much needed and very good upgrades brother 👌 I know that feeling when you finally free up some of those awkward motor mounts 😂 have you had to remove an arrma 6s motor mount yet 😨😂 make sure you have a good beer on hand ready to celebrate the moment if you ain't already dude hahaha 👍🤘😲💪
LOL Ya I have with my Kraton n know what u mean
Got it thanks bro
Anytime bro
I got impatient ordered spare parts off ebay shocks axles instead ordering individually looks like 4s rigs be upgrades for 3s
Thats cool lmk if they fit. supposedly the spares r suppose to be available on the 29th
Oh for this stevo i got impatient ordered stock granite parts im ordering extenders and mx28s from tower today. For the br i missing thousands dollars rcs parts from moving mostly traxxas rigs but parts and futaba remote hurts brother
Thanks man
😂 that's what she said good video
Thanks brotha 🤣
Great stuff Stevo 👌!!! That slipper/motor assembly is a bitch to pull off 😨. A big screwdriver definitely helps 👊. Was going to mention, the 3 slipper cover screws lock into the motor mount aluminum after the plastic. Not a bad idea to threadlock them too. You're going to haul complete ass with the 20T😱!!!! Simply no other way to do it 😍. The Typhon just plain rips😰😰😲. Great upload Bro 👊. Gonna help lots out there. 🍻🤘🤘😎💪👊👊
Hey Rich IDK how I missed this comment, but ya man I can't wait to see how the 20 tooth runs n thanks I was hoping this vid will help guys out someday
@@STEVOD313 don't sweat it Bro👊. Sadly, I miss comments regularly 😲. Happens despite even checking for them. Sometimes I see them 6-12 months later 😱....Lol. I'm hoping to get my Typhon back out again soon 😍. Thing just Rips something nasty 🏎️💨💨
Watching you take the motor out was highly entertaining. “When in doubt get a bigger screw driver” 😂 Plus the little extras you edited in were fun too. Sometimes when I have to tear down and rebuild a vehicle and it works, I feel like I can take on the world! Where do get the “blue” locktite? Is it just superglue?
no its a blue threadlocker that isnt permanent, so u can get it a part again, the red threadlockers is more permanent n requires heat to be able to remove again.If ur looking for some just look up blue threadlocker or blue locktight
LOL..Hey bro,they say its supposed to come off easy...Just get a bigger screwdriver...I can't wait for spring....BASH-ON BRO
LOL Easy my ass 🤣well I heard it gets easier once its done a couple times, but ya bro bigger screwdriver was the answer here lol bash on basher
11 Charlie sent me here. I’m originally from the 231 :)
Awesome man, welcome!
Entertaining and informative vid bro! 😎 Good idea on the gorilla tape under the spur. Going to have to do that next time it's apart! Would you be interested in a sticker once I get them in? Finally got some made!😀💪👊🤘🤘
yes definitely I'll put it up on the sticker wall of fame n I can send u mine. Just email me ur address n ill send u mine. declarksteve@gmail.com
@@STEVOD313 Sweet! Will do!
I never use thread lock and have never had any problems.
Oh shit i forgot i need lock tight.. ok well ill have to take the screws ti the motor mount and pinion later 😂 good thing i didnt take them out just now.
I was onlyy doing this just to give the gig gear and ponion gear just a bit of space so it will roll better because it needs a bit of force to really roll it back and forwards. Pretty sure you just gonna break it in alot but its maybe also normal to have it like this but in kinda consernd lol
Cannot seem to get the drive shaft off as easily as you did 😆
I take it back, the shaft didn't want to come with the spring attachment. Note for anyone as blind as me
LOL! i'm glad u got it
Not 1st but Never Last🎉❤️🎉Whooo hooo Bitch was like stop I want to stay🤣🤣🤣 I actually started watching this days ago!! And just been Busy🎉🎉🎉 Lock tight!! No Joke!!
Beef 🥩
IDK how I didnt see this comment, I thought u didnt watch it cus I didnt remember seeing ur comment, but I'm glad I see u were here n thanks for that HLL, u rock girl n I dont want beef well only for dinner lol
Hi Steve. I think youtube cut me outta you party. I checked to see if You were still on my site. Yep. I get your videos. Ax hasn't been getting them either.
ya ive been having same issues with getting a lot of people notifications lately
Someone in your chat nights said you tube gets kinda stinky about copyrighted music. I'll try posting that I purchase the music I use. A buck or two is worth to me. Oh well it is what it is. Wow!! you're almost at 2K.
When you do this guys motor. It's alot easyer. And please get that hot racing motor mount it is so much better then that fixed Mount. Great Video BTW I did this all by myself. What a bitch sliding the motor out. Took me over a hour since I had to take breaks 😃
Yes I have the hot racing motor plates for both my arrma 3s riigs