NOTORIOUS 11-16 Ford Superduty Front End ISSUE - Rehab Part 1
HTML-код
- Опубликовано: 23 авг 2024
- How to fix a broken leveling kit on a 2011 F350, removing and installing an adjustable trac bar for proper alignment. Begin prep for paint on the fender paint chips.
#f350 #superduty #powerstroke
Powerstroke master upgrade: bit.ly/powerst...
POWERSTROKE STAGE TWO KITS HERE:
bit.ly/stage_t...
Add me on instagram:
bit.ly/COREY_instagram
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
mustang
gt500
cts-v
supercharged
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks
Last project, installation of power steps on my 2011 f-350 Super Duty🎉
Currently working on a 2001 Ram 1500. Ripped out the motor, tranny, case and axles to swap in all 2500 gear and Cummins. From a truck that come from Massachusetts. I totally understand what kind of rust buckets you guys deal with. Much props. We don’t deal with that down south except you find them because ppl move to FL.
The last project I did was my ez lynk and exhaust install on my 18 6.7 power stroke. Now currently helping a buddy put a new motor in his Honda.
Last project was deleting my 2010 6.4 powerstroke, and putting in a new mishimoto radiator and hoses. Never done anything more difficult than an oil change but somehow got her done. She’s been treating me well ever since
Nice!
Just did all of this on a 2013, same adjustable Track Bar. It was super close to the cross member that hangs down so I ground it down about a 1/8th inch. While I was at it did the drag link and both tie rods and track bar bushing.
Oh and a new oem steering stabilizer.
Went with 2 Bilstein 2" leveling springs though.
Put a rough country lift on my 03 Cummins. Last time I’ll ever fucking do that
Just got done putting my 12 superduty on a diet
💪
I blew the the delete plate off of my exhaust manifold on my 14 f250. come to find out the guy that helped put my delete on broke the factory bolts off and put smaller bolts right next them and cross threaded them. So had to retap some holes
Yeah I’m in the process of doing 2003 Chevy trailblazer 4.2 L piston rings Front suspension in front differential
Well well what kind of prize
Got a cooling issue, Fan turns on constantly and sounds like a damn bus...
Currently waiting for a 1 hr video on your 2017 platnium lol. The updates in the transmission or your plans with it
2011 f350 hydro boost leaking all over gota seal kit to put in fingers crossed
I just got done working on an 06 jetta tdi.
I replaced the heads on my 6.7 powerstroke the some exhaust valves were cracked on one head in my driveway put exotic head studs in also
👍👍
My project is my daily 2016 6.7 powerstroke
I’m waiting on a SPE injector repair kit
Had to replace the drain hose for my sunroof on my 2016 f350 had to remove the fender
What a pain
I bet that was fun!!
axle swapping my 05 excursion to the 05 and up axles.. i feel yalls pain doin suspension work on the ground hahah
Garage floors are too thin for a lift. 😢 probably going to cut a big chunk out and pour a new slab
That’s a nice truck! I’ll take it if you don’t want to mess with it
I rebuilt the front end of my 2012 Chevy 2500hd in my garage
Nice 👍
Put a Carli 2.5 lift on my 2016 F250 and it easy. But…. I live in California and rust is non existent.
Do you manage your website? I've sent a couple emails and haven't gotten a reply. I'm trying to spend some money but have a couple questions first. Lol
Bendiciones hermosa Celina que Dios te cuidem donde quiera que cenilbalappp.Monster encantan tus videos.
Stop being cheap buy a new hose