I love my MK3s and now I finally have the budget to buy any kind of printer I want. I am pretty sure that I am going for an MK4 and MMU3 at some point, since I loved my MMU2s and MK3 combo. However, I will probably wait till you guys have implemented all the features you have as selling point atm. Input shaping, touch screen etc. Keep up the good work prusa. I am so proud and glad that you guys still go down the OpenSource and DIY route, despite of the problems that it might bring compared to making everything as cheap and mass produced as possible.
I assembled my MK4 kit a couple of weeks ago and I'm extremely happy with it. With the latest release candidate with the input shaping and pressure advance it really rocks! One small observation: the included USB drive is a tight fit in the reader - as demonstrated in this video. Ordinary USB drives fit normally.
I already got my MK4 (converted XL preorder), and I'm amazed! Auto Bed Leveling works like magic, I can re-use my Mk3S+ print sheets, and it'll receive squash ball feet soon. It is not perfect (no printer is), but it is even closer than my Mk3S+ before. Very good work, jo! ☺👍
I'd say don't use squash balls. Put it on a rubber mat and a large stone plate. Done. If you put it on squash balls please don't complain about bad surface finish.
@@REDxFROG i second this, squash ball are bad, put it on a concrete slab, it will remove/reduce vibration. most printer simply transfer their vibrations through what they are standing. I found that the hard way when I bought the "table" for my vCore 3.1 500mm
I've still got an MK2s, and I considered looking into an upgrade when BambuLabs released the P1P, but after seeing this, I'd likely want the MK4, mainly because I know the community is great, and the support will be excellent as well.
Love my Mk4! Prints look amazing, best printer experience I've had by far. Just a couple items I noticed around the filament sensor (may just be me): - Not getting notifications in prusa connect when filament runs out - If you remove the filament when the prompt comes up asking if the unload was successful, it looks like it resets the filament sensor calibration (making it basically not work)
I think I will order the MK4 kit in the coming weeks. I really want to build it and make the jump from an Ender 3 V2 to the MK4. The Prusa team and community seem amazing, and I truly appreciate Prusa's efforts to focus on their customers.
You will NOT be disappointed in that jump. I did that last year to the Mk3S+ and it was amazing and easy to transition. You'll find out quickly why this brand is so popular. It's one of those printers that "just works every time".
I've had my MK4 set up for about a week and I absolutely love it. Input shaping works great, the printer is fast and prints at excellent quality. The new screen and interface is a big improvement. Seriously considering upgrading my MK3S+
I'm looking forwards to getting my MK4, which will be my first Prusa machine, soon. I want to see how it works next to my X1-Carbon. I also want to make that cool looking guitar!
Quite unfortunate that you had to go through that trouble. You looked like you were having a lot of fun when it was printing on the wood! Hopefully things get better from here on out :)
I've been very happy with my Prusas (i3 Mk3, i3 MK3S, i3 MK3S+) and can't wait before picking up the MK4...but I'm going to wait for the input shaper. Also, waiting to hear why Uncle Jesse's MK4 was having issues. More than happy to support you guys/an awesome company...but if these are early warning signs or slipping quality/cutting corners...I may have to reconsider.
In Uncle Jesse's case the problem was switched cable connection between print fan and extruder fan. The MK4 was printing and not cooling the heatsing... so the nozzle was clogged. It can be clearly seen in his videos of first layer prints.
It may not be as fancy as the printers coming from Bambu, but I really wish this had come out in January when I purchased my P1P. I would have bought the Mk4 kit instead. :(
Why MK4 over P1P? I loved my old MK3 but it hasn't been used since i got my P1P and it was pretty feature complete from the factory (i.e input shaping, speed)
@@bennetb01 Prusa MK4 is not as loud compared to the P1P from what I have heard. But some say MK4 is louder than the MK3s. Also Prusa has a better track record for support and you support the 3d printer community. You can also use V6 nozzles with an adapter. But the P1P is also a great printer and cheaper.
@@chadfarmer7695 I will buy your defective p1p for a very low price, cause as you mention, it have problems. But relax now you will buy your dream mk4. If I offer you $200 then you will need just $1000! That's a great deal my friend!
Just received my Prusa MK4. There are no instructions on how to assemble and connect the spool holders to the printer. The two horizontal parts simply do not "click" into place.
Hi Roger. We are sorry for this. The instructions can be found on the next section of the online assembly guide. help.prusa3d.com/guide/7-y-carriage-heatbed-assembly_438310#439941 If you haven't been able to solve it, please contact our Technical Support Team, and we will help you. help.prusa3d.com/article/customer-support_2287
@@Prusa3D Thank you for the link. But I have to point out that I purchased the assembled Prusa, not the kit. The link you provided goes to the KIT assembly instructions. If there are parts that need to be assembled for the already assembled kit, then some minimal instructions ought to be provided with the assembled printer, either in print form or some link. The printer does come with a printed 3D Printing handbook, and that is where I would expect the spool holder assembly instructions would be, but it's not there.
Hi Roger. Yes, you are right. The instructions for the parts that should be assembled/finished by Assembled Printer owners should be in the 3D Printing Handbook too. I am passing the feedback, and I hope we can add this info there soon. Apologies for the inconveniences Roger.
Just ordered mine in the summer sale. Really looking forward to it. Less happy that the eShop charged me twice and while customer service admitted the fault and processed a refund they refused to take responsibility for the currency conversion fees leaving me about €30 out of pocket. 😣
Did you say 60 minutes to make that small print on the website says only takes 20 to do a benchy boat and that's a lot more detail hope you can help thanks.
Especially a certain gentleman on RUclips had exactly the problem. Has therefore sent back his printer, although the problem would have been solved quickly. Simply design the plugs so that they cannot be interchanged. Can't be that difficult, can it? Why do they always save money in the wrong places? Same with the bearings.
@@Neo1983m someone who cant connect 2 fans correctly with perfect diagram and instructions shouldnt even touch 3d printer, cant be that difficult to follow the manual. mk3 has shit bearings tho i agree, mine started to sound really sad after a year. i believe mk3 had the test for correct fan connection
1:54 I still can’t get over how fast the Z axis moves compared to my MK2.5. I know, I know, it’s not a Voron, but whatever, it still looks unnatural on a Prusa. Was the MK3 able to move this fast as well?
@@REDxFROG when I’m jogging the Z on my MK2.5 it doesn’t move anywhere near that fast. Whether it’s the physical capability or just in firmware I don’t know, but they clearly changed something for the MK4.
If you are facing some technical issues, please let our support team know. The fastest would be our 24/7 live chat which is in the right bottom side of the eshop. We will give you helping hand 🙂
Is there any way to setup the LED status light on the front to go from White to Green progressively during the print until its all green when finished just like a Rivian R1S does when charging?
Correct. Mk4 doesn't have stealth Mode. My printer is loud as an Chainsaw. It goes back and will replaced but other Mk4´s sound level is a bit more silent as mk3s+. But do you have new and good quality bearings in your mk3s+ he is quieter.
Leider Lange Lieferzeit für den MK4 Kit ...... jetzt schon 13 Wochen, um zu erfahren laut Shipping List , dass es wahrscheinlich noch 2 Wochen länger dauert, Also 15 Wochen fast 4 Monate
I assembled my kit yesterday and it works perfectly so far, as long as you print locally or using Prusa's own software. BUT: I'm a huge fan of Octoprint and have been using it with my Mk3S+ for years. I'm comfortable with it, it gives me loads of features including a webcam and a vast selection of plugins. But the RPi which I used with the Mk3 will not work with the Mk4. It sees and recognises it but will not pass data. I've tried different cables and computers but the problem remains and is clearly the printer. I'm not the only one with this problem - there are reports of it everywhere. @Prusa3D: You need to fix this!
@@Prusa3DThank you for your offer of support - but I seem to have fixed it. It was due to the setup for the Octoprint for Mk4 being subtly different than for the Mk3S+: it's not a straight swap. So I re-installed the Octoprint image from scratch, having taken a backup of the original config, imported the config file and it connected fine. Might be worth seeing if you can replicate that and putting into the Octoprint support article. Thanks again.
The prusa i3 printer I bought ~80 days ago doesn't do this! It's like a different printer. Oh yeah, you suddenly released the MK4, without announcing it like the XL, so I just bought a MK3 just before that and it's price dropped almost 20%. But hey, I can upgrade for 650 euros. Yes, I'm still mad about that.
Yes it will. Just the easy release power supply system is not available yet. I have mine printing in the enclosure for a week now. LCD mounts were recently released. LCD cable is a bit on the short side though but it fits.
@@kailin1496 I see. Hopefully they plan on using the knob and touch together. I have a bigtreetech TFT that has marlin and touch mode, and I wish it allowed the knob as well as the touch at the same time.
Own a Prusa Mini+, Prusa MKI3S+, and now the MK4, Converted from XL , Shipped 1st day given, received and printing by the last day given to ship!!! The First layer Level is fantastic! It allows me to switch between print sheets without adjustment!, Also got the nozzle adapter, and will give it a try soon. Love the 32 bit LCD with the color screen and more/better info. Haven't had a need to make use of the UI for info on the screen. Will be glad when the announced firmware updates are out!! Also having issues with the PrusaConnect...restarting, transfer speed, etc. Chat informed me "it is under development." SO for now, using the USB stick.
@@aaqu2232 yeah, I hear and read that the wireless transfer speed is a joke. Guess they’ll adress that in a firmware update aswell. Luckily firmware is updatable with the USB :). Hope a lot of those is fixed once I get my MK4 Kit
It's too bad they didnt included the process before print start. I am on the fence of upgrading my MK3S+ to an MK3,5S or MK3,9S or just buy a Bambu A1 instead. Honestly I'd like to upgrade my Prusa more, but cannot ignore how high the prices are for that compared to a whole new Bambu printer. I know Bambu have a sort of sleep mode, so it can stay connected to the internet, with low power consumption, and everything else turned off. Does anyone know if Prusa MK4 has the same sleep mode? Also Bambu cleans the nozzle before print, it has a nozzle wiper which works great. With the MK3S+ I have to stand with tweezers before every print so before print I can catch an clean off the oozing material quickly. Does anyone know if the MK4 is able to clean the nozzle succesfully troughoutly before every print just like Bambu, or it is not so good at that?
The i3 stands for iteration 3. The current form of bed slinger is the third iteration of Prusa printers. The MK4 means it's the 4th major update of the i3 series
I am absolutely upgrading my MK3S+to the 3.5 as soon as I'm able... dunno if I'll go directly to MK4 from there, or step up to the 3.9 first. I love how Prusa industries is so customer friendly in their products, with backwards compatibility, upgrade options, and support for old models.
Id like a prusa but the mini and mk4 are too small...the XL is huge and i cant afford such an expensive tool changer. I need a coreXY enclosed possibly heated. Speed is great but not at the expense of quality and reliability. I get it you are holding onto your existing customers but why not go after the better quality of corexy? And a more commonly wanted size like 280-300mm cubed?
I have a mk4 and only 6 months old. Not working at all. I have sent the error message number to them on several occasions with no definate response. They have asked for videos of the problem but I do not have video facilities to carry out this procedure. I bought this machine as a hobbiest not as a profession. I am willing to dump the machine and take a loss as I cannot get anywhere or satisfation from this company.
Hi. We are sorry for this. This shouldnt be the case with a new MK4 unit. We would like to check your case, and speed the resolution of it. But we cannot find it with the information on RUclips. Would you mind to send us a private message on our Facebook/Instagram page with your order/email address? facebook.com/PrusaResearch instagram.com/josefprusa/
Caro signor PRUSA sono Vladimiro non so se mai leggerai questo messaggio ma ci voglio provare,io al mio malgrado ho acquistato una mk3s 10 giorni prima che uscisse la nuova mk 4 allo stesso prezzo della mia. Ora ti lascio immaginare la mia rabbia soprattutto quando ho visto che per aggiornarla con il buono dovevo spendere altri 500€.vi ho contattato via mail e mi è stato detto che voi non fate cambi e quindi mi è stato consigliato di fare il reso per poi riacquistare la mk4. Infatti così ho fatto ma dopo 3 settimane che la mia stampante è arrivata in sede non avendo nessuna notizia ho mandato una mail per chiedere spiegazioni e mi hanno risposto che la stampante è in sede in attesa di essere ispezionata ed attendere il rimborso. Ora voglio dire se secondo voi sia regolare una tempistica del genere anche perché i tempi di spedizione della mk4 si aggirano alle 6/7 settimane. Credo che ci sia qualcosa che non funziona anche perché io l’ho pagata subito. Grazie e scusami
Bude u predobjednavek, nez se zacnou posilat kity. Byla to chyba v popisu, tak je moznost takhle ziskat filament zdarma. Jinak ke slozenym tiskarnam byl prilizeny filament vzdy.
Just ordered mine. I appreciate their mindset regarding open source, repairability, and their dedication to providing great customer support. Thx!
I love my MK3s and now I finally have the budget to buy any kind of printer I want. I am pretty sure that I am going for an MK4 and MMU3 at some point, since I loved my MMU2s and MK3 combo. However, I will probably wait till you guys have implemented all the features you have as selling point atm. Input shaping, touch screen etc. Keep up the good work prusa. I am so proud and glad that you guys still go down the OpenSource and DIY route, despite of the problems that it might bring compared to making everything as cheap and mass produced as possible.
I assembled my MK4 kit a couple of weeks ago and I'm extremely happy with it. With the latest release candidate with the input shaping and pressure advance it really rocks! One small observation: the included USB drive is a tight fit in the reader - as demonstrated in this video. Ordinary USB drives fit normally.
I noticed that too
Have my MK4 running for a week now (converted xl order). Love the UI, wifi and auto bed leveling compared to my MK3s+. Looking forward to the mmu3.
when did you order? I'm still waiting for mine
@@janvb7117 day 2 xl order conversion preassembled version
you will love it
Congratulations. Enjoy your printer
I already got my MK4 (converted XL preorder), and I'm amazed! Auto Bed Leveling works like magic, I can re-use my Mk3S+ print sheets, and it'll receive squash ball feet soon.
It is not perfect (no printer is), but it is even closer than my Mk3S+ before. Very good work, jo! ☺👍
I'd say don't use squash balls.
Put it on a rubber mat and a large stone plate. Done.
If you put it on squash balls please don't complain about bad surface finish.
@@REDxFROG i second this, squash ball are bad, put it on a concrete slab, it will remove/reduce vibration. most printer simply transfer their vibrations through what they are standing. I found that the hard way when I bought the "table" for my vCore 3.1 500mm
I put mine on abig concrete slab (it cost 7 bucks or so), and it prints perfectly on it.
@@mophie6941what about Sorbothane feet? I have some for my MK3S and was thinking about adding some to my mk4
I've still got an MK2s, and I considered looking into an upgrade when BambuLabs released the P1P, but after seeing this, I'd likely want the MK4, mainly because I know the community is great, and the support will be excellent as well.
Same for me
And you can get all the spare parts for years to come
I never imagined all the little things that a 3D printer had. It took me 10 hours to assemble my first Prusa, the MK4.
Just finished assembling mine and it works perfectly.! The printer is very quiet and easy to set up.
Love my Mk4! Prints look amazing, best printer experience I've had by far. Just a couple items I noticed around the filament sensor (may just be me):
- Not getting notifications in prusa connect when filament runs out
- If you remove the filament when the prompt comes up asking if the unload was successful, it looks like it resets the filament sensor calibration (making it basically not work)
I think I will order the MK4 kit in the coming weeks. I really want to build it and make the jump from an Ender 3 V2 to the MK4. The Prusa team and community seem amazing, and I truly appreciate Prusa's efforts to focus on their customers.
You will NOT be disappointed in that jump. I did that last year to the Mk3S+ and it was amazing and easy to transition. You'll find out quickly why this brand is so popular. It's one of those printers that "just works every time".
Do it! It is a Product for us and not to tinker all the time! But keep your Ender an Mod as hard as you like!
@@ChazBword Yep, all I ever do is put lube on the rails and that's it
Be prepared to wait. Seemingly long backorder
Im honestly going to do the same my V2 is haunted with issues out the ass and I'm so done with the bs from creality
My MK4 is ordered and I can‘t wait for it to arrive! Just have to be patient.
I've had my MK4 set up for about a week and I absolutely love it. Input shaping works great, the printer is fast and prints at excellent quality. The new screen and interface is a big improvement. Seriously considering upgrading my MK3S+
I'm looking forwards to getting my MK4, which will be my first Prusa machine, soon. I want to see how it works next to my X1-Carbon. I also want to make that cool looking guitar!
Bambu and Prusa both make incredible printers for sure!
I’m excited for my MK4 upgrade kit!
Just assembled mine, about to run my first print. Can't wait!!
thanks for your efforts into this 3D world and open source without it we where not so far as today sir hollandica says hi
Great! I eagerly await my kit. Should be shipping soon :-)
Loving mine so far 👍🏼👏🏼👏🏼👏🏼
Can’t wait to get my replacement! My first MK printer 😬🤘
Quite unfortunate that you had to go through that trouble. You looked like you were having a lot of fun when it was printing on the wood! Hopefully things get better from here on out :)
I've been very happy with my Prusas (i3 Mk3, i3 MK3S, i3 MK3S+) and can't wait before picking up the MK4...but I'm going to wait for the input shaper. Also, waiting to hear why Uncle Jesse's MK4 was having issues.
More than happy to support you guys/an awesome company...but if these are early warning signs or slipping quality/cutting corners...I may have to reconsider.
3.5 kit pre order as well and ffs. The problems are stacking and the support isn't
In Uncle Jesse's case the problem was switched cable connection between print fan and extruder fan. The MK4 was printing and not cooling the heatsing... so the nozzle was clogged. It can be clearly seen in his videos of first layer prints.
@@xhobv02 Jup. The Hotend-Cooling-Fan is not running, when it should.
100% User Error.
Uncle Jesse was just user error. As a „experienced“ printer operator not checking the Fans is just bad.
@@uhu4677 what happens to all sensor that check everything for the first time? It's a mimic? Or they don't check the fans?
It may not be as fancy as the printers coming from Bambu, but I really wish this had come out in January when I purchased my P1P. I would have bought the Mk4 kit instead. :(
Why MK4 over P1P? I loved my old MK3 but it hasn't been used since i got my P1P and it was pretty feature complete from the factory (i.e input shaping, speed)
@@bennetb01 Prusa MK4 is not as loud compared to the P1P from what I have heard. But some say MK4 is louder than the MK3s.
Also Prusa has a better track record for support and you support the 3d printer community. You can also use V6 nozzles with an adapter.
But the P1P is also a great printer and cheaper.
Coming from the mk3s+ the mk4 didnt wow me to make me regret buying my X1CC. You arent missing anything.
I'm selling my p1p. I'm tired of not getting constant quality and sizes. Everytime I'm off
@@chadfarmer7695 I will buy your defective p1p for a very low price, cause as you mention, it have problems. But relax now you will buy your dream mk4. If I offer you $200 then you will need just $1000! That's a great deal my friend!
Ordered the Kit, also printed parts to make a Color theme! Looking forward to it!
Any updates on the input shaper?
I have the mini and I love it. I plan to upgrade to MK4. I'm still waiting until the MMU3 is available. I want to print multi colors.
I can't wait to build my MK4!
lol I am amazed that you had to make this video but I have seen 2 youtubers mess up the filament sensor calibration in their live streams so far. 😀
I have my XL set up and working, and MK4 on order (2nd Day) Getting to know my XL, I wish I had ordered another 1 or 2.
Just received my Prusa MK4. There are no instructions on how to assemble and connect the spool holders to the printer. The two horizontal parts simply do not "click" into place.
Hi Roger. We are sorry for this. The instructions can be found on the next section of the online assembly guide.
help.prusa3d.com/guide/7-y-carriage-heatbed-assembly_438310#439941
If you haven't been able to solve it, please contact our Technical Support Team, and we will help you.
help.prusa3d.com/article/customer-support_2287
@@Prusa3D Thank you for the link. But I have to point out that I purchased the assembled Prusa, not the kit. The link you provided goes to the KIT assembly instructions. If there are parts that need to be assembled for the already assembled kit, then some minimal instructions ought to be provided with the assembled printer, either in print form or some link. The printer does come with a printed 3D Printing handbook, and that is where I would expect the spool holder assembly instructions would be, but it's not there.
Hi Roger. Yes, you are right. The instructions for the parts that should be assembled/finished by Assembled Printer owners should be in the 3D Printing Handbook too. I am passing the feedback, and I hope we can add this info there soon.
Apologies for the inconveniences Roger.
How do I make sure the square is perfectly square? I don't want slanted prints.
Just ordered mine in the summer sale. Really looking forward to it. Less happy that the eShop charged me twice and while customer service admitted the fault and processed a refund they refused to take responsibility for the currency conversion fees leaving me about €30 out of pocket. 😣
Did you say 60 minutes to make that small print on the website says only takes 20 to do a benchy boat and that's a lot more detail hope you can help thanks.
How does the auto bed leveling work when there's a blob of melted filament on the nozzle tip?
Excited for this printer!
The fan test should make you identify which is spinning. People got their printer with fans swapped which passes all tests. 😬
Especially a certain gentleman on RUclips had exactly the problem. Has therefore sent back his printer, although the problem would have been solved quickly. Simply design the plugs so that they cannot be interchanged. Can't be that difficult, can it? Why do they always save money in the wrong places? Same with the bearings.
@@Neo1983m someone who cant connect 2 fans correctly with perfect diagram and instructions shouldnt even touch 3d printer, cant be that difficult to follow the manual. mk3 has shit bearings tho i agree, mine started to sound really sad after a year. i believe mk3 had the test for correct fan connection
@@adamvanek8005 The youtuber purchased it fully assembled. Prusa connected them wrong during their manufacturing assembly.
@@adamvanek8005 He dont assemble itself. The printer was manufactured assembled. He don't anything wrong. You understand?
My printer makes very loud noise during printing. like a saw. Return Label is in progress since 1 week. :(
I love my Prusa MK4.
I would love to follow this guide. But where is my MK4. Lol.
When does the XL ship???????????????????????????????????
how to change calibration for 1st layer print from smooth to textured sheet
1:54 I still can’t get over how fast the Z axis moves compared to my MK2.5. I know, I know, it’s not a Voron, but whatever, it still looks unnatural on a Prusa. Was the MK3 able to move this fast as well?
It's really nothing unusual but most of the time limited by software. To avoid crashes, errors...maybe even injuries. Lol
@@REDxFROG when I’m jogging the Z on my MK2.5 it doesn’t move anywhere near that fast. Whether it’s the physical capability or just in firmware I don’t know, but they clearly changed something for the MK4.
mk3 isnt even close to these Z speeds, its really neat on the mk4 i love to just watch them fast moving axis
Would love to see a new mini as well!
Can’t wait to get my upgrade kit
I'm looking forward for my MK4 kit! Sadly it's going to take a while till it's getting shipped, because I was to slow with ordering
I ordered my full build within 3 hours of announcement and still have nothing. Frustrating but will be worth the wait I’m sure.
Can't wait to get mine.
How did you guys get the mbl to work? For me when i slice my files with pruca slicer it doesn't level at the beginning.
If you are facing some technical issues, please let our support team know. The fastest would be our 24/7 live chat which is in the right bottom side of the eshop.
We will give you helping hand 🙂
Is there any way to setup the LED status light on the front to go from White to Green progressively during the print until its all green when finished just like a Rivian R1S does when charging?
To the proud MK4 owners out there: How are the noise level compared to the MK3? I heard mk4 doesn't have stealth mode??
Correct. Mk4 doesn't have stealth Mode. My printer is loud as an Chainsaw. It goes back and will replaced but other Mk4´s sound level is a bit more silent as mk3s+. But do you have new and good quality bearings in your mk3s+ he is quieter.
Great new update!
Leider Lange Lieferzeit für den MK4 Kit ...... jetzt schon 13 Wochen, um zu erfahren laut Shipping List , dass es wahrscheinlich noch 2 Wochen länger dauert, Also 15 Wochen fast 4 Monate
3:28 Is that an i3 mk0 in the top left?
I'm and ender guy but bravo on this printer, seems like a great product.
I have to admit I'm bitter there is more info on the MK4 than there is the multi nozzle XL
Hello. Love to have one. Where are the damn kits?
I assembled my kit yesterday and it works perfectly so far, as long as you print locally or using Prusa's own software. BUT: I'm a huge fan of Octoprint and have been using it with my Mk3S+ for years. I'm comfortable with it, it gives me loads of features including a webcam and a vast selection of plugins. But the RPi which I used with the Mk3 will not work with the Mk4. It sees and recognises it but will not pass data. I've tried different cables and computers but the problem remains and is clearly the printer. I'm not the only one with this problem - there are reports of it everywhere. @Prusa3D: You need to fix this!
Hi Manek. Please contact our Support Team with the details of the issue.
help.prusa3d.com/article/customer-support_2287
@@Prusa3DThank you for your offer of support - but I seem to have fixed it. It was due to the setup for the Octoprint for Mk4 being subtly different than for the Mk3S+: it's not a straight swap. So I re-installed the Octoprint image from scratch, having taken a backup of the original config, imported the config file and it connected fine. Might be worth seeing if you can replicate that and putting into the Octoprint support article. Thanks again.
Hi Manek. We are happy to know it is solved. If you need more support, you know where to find us.
help.prusa3d.com/article/customer-support_2287
The prusa i3 printer I bought ~80 days ago doesn't do this! It's like a different printer.
Oh yeah, you suddenly released the MK4, without announcing it like the XL, so I just bought a MK3 just before that and it's price dropped almost 20%. But hey, I can upgrade for 650 euros.
Yes, I'm still mad about that.
Well done thanks for a great printer.
Will the Prusa Mk4 work ok in the Prusa Enclosure?
Yes it will. Just the easy release power supply system is not available yet. I have mine printing in the enclosure for a week now. LCD mounts were recently released. LCD cable is a bit on the short side though but it fits.
No touch screen?
the screen is a touch screen but it is currently disabled I believe they are still developing the firmware for it.
@@kailin1496 I see. Hopefully they plan on using the knob and touch together. I have a bigtreetech TFT that has marlin and touch mode, and I wish it allowed the knob as well as the touch at the same time.
How unlucky! I already have a Prusa I3 and I don't need one more! 😭😊 (That's really cool!)
Got my MK4 a month ago. Its an amazing printer for my personal use. Still not the kind of workhorse that my vorons are.
I just bought my mk3s+ in February
Own a Prusa Mini+, Prusa MKI3S+, and now the MK4, Converted from XL , Shipped 1st day given, received and printing by the last day given to ship!!! The First layer Level is fantastic! It allows me to switch between print sheets without adjustment!, Also got the nozzle adapter, and will give it a try soon. Love the 32 bit LCD with the color screen and more/better info. Haven't had a need to make use of the UI for info on the screen.
Will be glad when the announced firmware updates are out!! Also having issues with the PrusaConnect...restarting, transfer speed, etc. Chat informed me "it is under development." SO for now, using the USB stick.
can it print metal
No. Metal is too abrasive and making molten metal in a hotend like this is basically impossible. But most printers can’t print metal either
Great great josef👌👌
How do I turn input shaping?
You can’t yet. A firmware update will be released to enable both preassure advanced and input shaping. I’m guessing a month or so.
@@mikajurvanen8219 or 2 years as file upload via network ;)
@@aaqu2232 yeah, I hear and read that the wireless transfer speed is a joke. Guess they’ll adress that in a firmware update aswell. Luckily firmware is updatable with the USB :). Hope a lot of those is fixed once I get my MK4 Kit
It's too bad they didnt included the process before print start. I am on the fence of upgrading my MK3S+ to an MK3,5S or MK3,9S or just buy a Bambu A1 instead. Honestly I'd like to upgrade my Prusa more, but cannot ignore how high the prices are for that compared to a whole new Bambu printer.
I know Bambu have a sort of sleep mode, so it can stay connected to the internet, with low power consumption, and everything else turned off. Does anyone know if Prusa MK4 has the same sleep mode?
Also Bambu cleans the nozzle before print, it has a nozzle wiper which works great. With the MK3S+ I have to stand with tweezers before every print so before print I can catch an clean off the oozing material quickly. Does anyone know if the MK4 is able to clean the nozzle succesfully troughoutly before every print just like Bambu, or it is not so good at that?
Mister Prusa you and all of Team, Content and Products are amazing!
Why is your printer so quiet and no rattling noise?
Mine doesn't have rattling noises, none of the 6 I have do. Lol.
@Xyphis Unfortunately, Prusa does not seem to use Misumi bearings anymore, but cheap ones from China. Very sad.
Rattling on the bed?
Mine mk3s+ had this out of the Box, Had to grease the bearings, came dry
Change them with drylin bushings.They turn the printer into a ninja.
Myslím, že jste zaspali co se trhu týče
Very cool printer indeed
Thank you 🙏
My Z axis keeps failing after tightening and loosening the bet and I watched a video and it still fails it was a kit
What is mean in Prusa - i3 ?
The i3 stands for iteration 3. The current form of bed slinger is the third iteration of Prusa printers. The MK4 means it's the 4th major update of the i3 series
😊 I will order one
Great and helpful video for beginners. Good job 👍👍👍
Prusa is Super 👍
I am absolutely upgrading my MK3S+to the 3.5 as soon as I'm able... dunno if I'll go directly to MK4 from there, or step up to the 3.9 first.
I love how Prusa industries is so customer friendly in their products, with backwards compatibility, upgrade options, and support for old models.
Id like a prusa but the mini and mk4 are too small...the XL is huge and i cant afford such an expensive tool changer. I need a coreXY enclosed possibly heated. Speed is great but not at the expense of quality and reliability. I get it you are holding onto your existing customers but why not go after the better quality of corexy? And a more commonly wanted size like 280-300mm cubed?
Personally didn’t like my mk3s+ Is the mk4 worth? The VFX was way too much for my liking.
I feel Prusa will be the next NOKIA or blackberry end style
I have a mk4 and only 6 months old. Not working at all.
I have sent the error message number to them on several occasions with no definate response.
They have asked for videos of the problem but I do not have video facilities to carry out this
procedure. I bought this machine as a hobbiest not as a profession. I am willing to
dump the machine and take a loss as I cannot get anywhere or satisfation from this company.
Hi. We are sorry for this. This shouldnt be the case with a new MK4 unit.
We would like to check your case, and speed the resolution of it. But we cannot find it with the information on RUclips.
Would you mind to send us a private message on our Facebook/Instagram page with your order/email address?
facebook.com/PrusaResearch
instagram.com/josefprusa/
Caro signor PRUSA sono Vladimiro non so se mai leggerai questo messaggio ma ci voglio provare,io al mio malgrado ho acquistato una mk3s 10 giorni prima che uscisse la nuova mk 4 allo stesso prezzo della mia. Ora ti lascio immaginare la mia rabbia soprattutto quando ho visto che per aggiornarla con il buono dovevo spendere altri 500€.vi ho contattato via mail e mi è stato detto che voi non fate cambi e quindi mi è stato consigliato di fare il reso per poi riacquistare la mk4. Infatti così ho fatto ma dopo 3 settimane che la mia stampante è arrivata in sede non avendo nessuna notizia ho mandato una mail per chiedere spiegazioni e mi hanno risposto che la stampante è in sede in attesa di essere ispezionata ed attendere il rimborso. Ora voglio dire se secondo voi sia regolare una tempistica del genere anche perché i tempi di spedizione della mk4 si aggirano alle 6/7 settimane. Credo che ci sia qualcosa che non funziona anche perché io l’ho pagata subito. Grazie e scusami
Does the MK4 still fits in a IKEA lack table encloser?
we really need an update to make the touch screen work as touch screen xD
Im missing a feature you promised when you sold it to me.... input shaper
where's the firmware update at for input shaping?
Amazing
rika ze je prilozenej filament ale na twiteru se omlouval ze zadnej nebude
Bude u predobjednavek, nez se zacnou posilat kity. Byla to chyba v popisu, tak je moznost takhle ziskat filament zdarma. Jinak ke slozenym tiskarnam byl prilizeny filament vzdy.
But where is the hat Josef?
Trochę szkoda, że ciągle nie wprowadzono ładniejszego wyświetlacza z obsługą dotykiem 😢
Good Job Józek !
You know prusa is winning when all the bambu babies show up in the comments, working for their CCP paycheck.
Even when you are on a "Prusa only" video with Josef himself featured, you bring up a competitor. Feeling inadequate about something?
I'm sorry, but it's 2 years too late. You can do it more sophisticatedly. The construction is outdated. Look at bamboo, as the price is similar.
Should of been a corexy.
Call it an XL mini with a 250mm bed.
wish I could afford it
Prusa Mini 2?
Well the month is almost over. Are the kits being shipped out?
🧡
ty si z česka?
Who's this guy again?