Water Cycle Working Model | Water cycle model kaise banayen

Поделиться
HTML-код
  • Опубликовано: 16 янв 2021
  • Due to copyright claim on music..the background music has muted.
    Water cycle working model with real water falling system.
    if you like the video,plz subscribe my channel..
    #Mountains making tutorial#
    -drive.google.com/file/d/1Pc-O...
    #Required material#
    Plybord for base.16 inch width,24 inch length.
    5 thermacol sheets(1 inchi width) for mountain and clouds,
    white chart for background sky and mountains design..
    green valvate paper for ground,
    glue gun,
    glue sticks,
    fevicol,
    fabric colours,
    artificial trees and grass,
    animal toys,
    small water pump and pipe,
    a plastic tray for water pond..
    some stone pieces for decoration,
    ice cream sticks for hut...etc..
    Water Pump-to purchase waterpump..click on the link.
    www.amazon.in/dp/B09SV58HP4/r...
    i used this one..
    #Pump fixing method continuously(Hindi)#
    .pipe ko pump se connect krke thermacol sheet me hole krke pipe and pump ki wire ko backside me nikaal diya..or light k extention bord se connect kr diya..fir pipe ko backside se uper ko lejakr clouds k nichhe set kr diya gluegun se..or pipe ka muh band krke pipe me 4-5 holes kr diye..jisse water bahar aa sake..fir blue tray me water bhar diya jisme moter fix kri thi..fir jab light switch on kiya to pump k zariye tray ka water pipe se hota hua clouds me se girne lagega..or mountains se behta hua..narrow streams me se hokr wapas blue tray me mil jayega..is tarah water cycle chalta rahega..
    #Pump fixing method (English)#
    Connect the pipe with water pump and make a hole in the backside thermacol sheet then take the pump wire and pipe to the backside through the hole. Connect the wire to the electric board.after that take the pipe from the backside to the upward near the clouds and set the pipe behind the clouds.block the mouth of the pipe and make 5-6 holes in the pipe for showering the water💦.
    Fill the water in the blue tray in which the water pump is fixed.when we on the switch, the water pump throw the water of the blue tray to the clouds through the pipe which is connected from the pump to clouds and water shower begins from the clouds and the water flow down from mountain to narrow streams and again it falls into blue tray.in this way the water cycle will runs continuously.
    #Clouds Making Method-
    Cut the cloud Shapes on thick sheet of thermacol( you can paste two same shapes of cloud together to make it thicker).take blade and make the corners and edges round..then colour it with fabric colours..
    #How to move cloud:-
    First you have to cut the cloud shape on thermacol and make its corners & edges round with blade.cut a line in the backwall where you want to move the cloud.
    you have to fix a small piece of stick in the backside of the cloud.one side of the stick shoulde be fixed to the cloud and other side should be passed through the backwall sheet..you have to move the stick from backside by your hand so that the cloud will move with the stick..watch the video carefully with a slow speed..you will understand how will you do that..
    ##Explaination#
    the sun heats up the water present in water bodies.the water vapours and raise in the sky and form clouds..in the sky these clouds move here and there with wind .when these clouds become cool the water vapour convert into water drops and fall down on mountains and land as rain..from where this water flow from mountains and form rivers and other water bodies..these water bodies flow and in the end mix with seas & oceans..then the sun again heat the water and water vapour raise up and form clouds..this process happens continuously..This is called water cycle..

Комментарии • 1,1 тыс.