3 Minute FPV Build Guide - TP3 3" Toothpick - Freestyle Flights and Build Suggestions
HTML-код
- Опубликовано: 9 фев 2025
- A new style of video I am going to be doing! These few minute videos are to highlight builds I really enjoy flying but may not want to stretch out into a 15-20 min video. If there is enough interest in any of these, I will explore doing a longer-form review and build style video!
Please let me know if you have any suggestions, questions, or comments and thanks for watching!
Love the flight style and the edit! Bravmoe!
Thank you very much, TW!!
Mate this is a good format for a build guide. Smashing it as always. Also really sick flow with your freestyle!!
I appreciate it ! Thanks for the feedback 😊
What an absolute banger! I'm gonna steal this style for my next review
Thank you man ! Hey that’s only fair since I stole this song from you LOL your vid was such a vibe watched in 10 times over lol was gonna credit you for putting me on to the song - hope to see more vids from you soon man , truly dig your content
Awesome video! Great toothpick! Iam rebuilding my crux3 : ) And thats some nice freestyle!
Could you Link the products in the comments?
Like the song choice! 💃🏻🕺👯🪩
the super short flight times are the main reason i havent gotten into fpv drones but its sure looks like fun
I swear to you I had the same reservations when I first started flying - when you’re in the air though 3 min starts to feel like a long time 😅 and we can always buy more batteries ! They’re are cheap on the micro drones
@@MoeFPV ya that is true hey maybe ill build a small drone like this one we will see
I'm digging the short format build ideas with flight footage sprinkled in.
One suggestion: add the build specs in the description and/or chapter markers to the build specs in the video. I don't know what it is about chapter markers that just makes videos seem more interactive.
Thank you Mr meaty this is a great idea ! The parts in the description will be very handy since I can include a bit more written info that I couldn’t squeeze into the vid. Thanks for the help!
You get those solar pannels installed bud? Fill me in!
I was wondering what goggles you use in most video and could you give a few links for the parts used thanks 😊
Converted one of my whoops to TP3 after one of your videos. No regrets! 🔥 Could you share your tune? I couldn't get my one quite right yet.
Are you on a 2-3s build? If you’re on BF 4.3 or 4.4 fpv cycle has a preset that is a good starting point. Just search up TP3 in the presets - just make sure your fc has bidirectional d shot setup - I believe that’s part of the preset
@@MoeFPV2s same motors, thanks mate. I've done that but prop was was a bit much for my taste
@@XYZFPV really? Hmm can you message me on IG - I’ll send you screens of my tune and see if that’s better for you
🤘
🙏
Waiter! Waiter! Some stick cam and longer build videos please!
Longer vid coming very soon!!
Based on your videos I have build my own 3“2s. Can you tell me your rates? Or do you use stock rates?
Just finished a crux3 hdzero build. Very odd having lower kV motors (6400) on 3018 bi blades. Very efficient with long flight times but didn't feel as punchy as higher kV motors on smaller props.
You could definitely pump the KV up a bit if youre looking for some extra punch - or use a tri blade instead. It takes some getting used to, but I enjoy the flight characteristics of these lower kvs on a light toothpick. You can/have to use more of your throttle range when flying around - makes me feel like im really utilizing all the build has to offer! But the extra weight of HD might benefit from some higher kv motors, as well
@MoeFPV hey Moe. The fc came out of a mobula8 which is tri blade and lighter. Could the tune on the fc be not optimal for more weight and bigger bi blades?
Should I try the tp3 tune you mentioned above?
@@FIGFPV that is a good place to start but might require a bit further adjustment to get it flying the way you’d like. Also gotta make sure you have bidirectional d shot enabled if the FC is capable as well as dshot600 I believe! What FC are you using?
@@MoeFPV happymodel crazyf405
Hey Moe, do you have the PIDs for this? Or a cli dump?
hey moe i have 1 on 1 exact same specs except motors and i use rapidfire module but my image not even close.. any suggestions?
Hmm do you have the true RC on the quad ? What antennas are you using on your module and what goggle are you using ? Also what type of environment are you flying in? Keep in mind any concrete or urban environments will usually result in worse analog image due to multipathing!
@@MoeFPV truerc rhcp on quad, foxeer duo rhcp on orqa pilot one. i have all the high-end 🤪 i thought it would be isolating camera signal cable but looks like you did nothing special about that on your build 🤔
how did you sauder that xt30 onto that x12 FC??🤨
On these x12s, I just replace the PH 2.0 connector with the XT30. Once you take the shrink tube off the connector, you can just unsolder it and swap it for the XT30
Did you tried Betafpv hx115? Bought one and I feel 1103 are to small for 3 inch props. Also thinking buying 1202.5. Have you tried 8000 kV? Or they would be overkill, and will refuse flight time?
After your previous video, bought crux3 and made it a bit lighter 37.5g. Love this thing so much
Glad you're digging the platform! I haven't tried the 8000kv motors but they should be ok - just make sure your AIO can handle the amp draw as spinning these larger props might pull a lot. You will definitely lose some flight time but we do have some to spare. If you're looking for more power, though, the 3s build might be for you. PLENTY of power there - absolute beast! Thanks for stopping by : )
@@MoeFPVthanks. I will first try 6400kV than.
Kebab would have your guts for garters. 😝 That is basically a crux 3
I hope not, I love Bob and his creations! I just want to see more people give the platform a chance and having ‘plug and play’ options might encourage pilots who otherwise may not have attempted the build. Also , the crux 3 uses a different AIO, cam, canopy, and of course, frame 😜
I was just looking for an old video of yours where you had built a 3" 2s!
Are you using the tune that came on that x12, betaflight defaults, a tune preset or a custom tune?
What’s up MR meaty! No I’m using a custom tune outside of the preset mentioned above. If you’re using an x12 and these motors send me a message on IG and I’ll send you my exact tune, if you wanna give it a try
Thanks! But I think you're using the happymodel motors. I'm either getting the rc&power 1202.5 6000kv or T-motor 1203 7000kv. I've had pretty good luck with UAVTech's toothpick preset. I think fpvcycle has one too.
Do u conformal coat ur quads?
I do not conformal any of mine, mostly out of laziness : )
Laterzzzzz all
Thanks for being here, Apache!
@@MoeFPV your welcome bro
Algorithm