Lightweight concrete made of cement limestone aluminum powder for peb buildings thermal insulation
HTML-код
- Опубликовано: 3 окт 2024
- Watch the video if you want to know how to install BARRISOL stretch ceiling • Stretch ceiling Barris...
Non autoclaved lightweight aerated concrete recipe you can find here www.pioner-grou...
Combination of light gauge steel frame with non autoclaved lightweight aerated concrete insulation www.pioner-grou...
Non autoclaved lightweight aerated concrete is a type of lightweight concrete which is used to produce blocks and replace bricks. NAAC is lighter then conventional concrete. It is formed by using portland cement, fly ash, limestone, aluminum powder and water. Aerated concrete has a good strength, durability, good thermal and sound insulation. Dry density of this material ranging between 600 kg/m3 to 1600 kg/m3. Non autoclaved lightweight concrete blocks can be used for housing and commercial purposes.
We have developed a unique non autoclave lightweight aerated concrete recipe and can achieve densities from 250 kg/m2 (even less) with perfect compressive strength, thermal and sound insulation.
PIONER GROUP supply lightweight aerated concrete infill for cold formed steel construction technology infill and we can supply dry mortars (plaster, floor screed, self leveling compound, lightweight aerated concrete dry mix etc.) production line with a good price and speed of delivery.
Cold formed steel, also known as light gauge steel or LGS, is deployed worldwide for structural framing, in buildings of all sizes and purposes. These include multi-story projects, meeting engineering compliance to local design and building codes and to last as long as any building erected using traditional materials.
There is a misconception by some that cold formed steel (CFS) should only be used for interior framing or non-structural building elements - but that’s not the full extent of its capabilities.
Far from it. CFS delivers many advantages in the construction of structural, load bearing walls as well.
Cold formed steel, also known as light gauge steel or LGS, is deployed worldwide for structural framing, in buildings of all sizes and purposes. These include multi-story projects, meeting engineering compliance to local design and building codes and to last as long as any building erected using traditional materials.
Because CFS, with the help of technical software (like, FRAMECAD STRUCTURE), can be engineered and designed to be load-bearing, and because of its unique physical characteristics, CFS makes for a superior structural framing material.
The mix sounds exactly like the AAC component, but I assume in different ratios and without the steam oven curing process. Can you refer me to test results, particularly regarding structural strength, compression, fire resistance, and insulation properties? I'm considering applying this technology in a residential villa.
Can someone try a replacement of the limestone powder with rice husk ash?, if possible, What could be the result of such in terms of compressive strength, workability etc of concrete form.
Yes you can replace it. Compressive strength depends on density. For 700 kg / m3 it is around 3 MPA
Is this technical video or DJ party?
Esse calcário é o mesmo agrícola?
Is this more or less cost effective for making cladding , blocks, and panels, compared to aerated concrete? Does it weigh more or less than aerated concrete?
Depends on density. For 600 kg/ m3 it is more or less competitive
I am looking for sum advice on my new progect
For someone that is planning to mix this manually, what advise would you give him in terms of
(1) the mix ratio,
(2) how and when to add aluminium powder and
(3) how to determine the quantity of aluminium to be added?
www.pioner-group.com/concrete
One recipe that I obtained from The British Concrete Institute was 1 gram of Al2 to 1 kilogram of pure Portland Cement. Mix to a free poring slurry, (with water). You can add fine silica sand. I think this was not more than 25%. Limit the rise to not more than 36". You will have to do tests. Also your moulds must be waterproof. I hope this is of help.
@@davidwootton683 I am from South Africa. Could you tell me what is AI2?
@@annamarialouisamorsner4571 Thankyou for your query. Al2 is Aluminium powder, the 2 is meant to be 1/2 a line down. As per the formula. I cannot do this with the line layout given here.
@@tudorgheorghe4532 1 gram of Al2 powder to 1 kilogram of pure Portland Cement. Test batch first.
What is the cost of the equipment? I’m in USA.
It depends on what you are going to produce. The cheapest option is to buy our assistance with the recipe creation using your raw materials, our service charge is 250 USD, than you can start from manual production. The basic recipe you can find over here www.pioner-group.com/concrete
ماهي اسماء المركبات والنسب
www.pioner-group.com/concrete
I guess no one in the video can speak. What are you mixing together? The music is too strong.
www.pioner-group.com/concrete
how does the limestone react with the cement and aluminum powder?
It helps for the reaction
Is this fire resistant ?.. can be replaced with Fire wall ??
This material is not combustible. Fire rating is class A1
Does this have the same insulation value and water proofing as aerated concrete?
yes, this is roughly the same material only for small production capacities
el aluminio es muy mal aislante térmico
we use aluminum powder not for insulation but for chemical reaction to make bobbles
Mantap bosku
Non autoclaved lightweight aerated concrete recipe www.pioner-group.com/concrete
How much maximum size of wall panel I can get out of this mix? How long should I wait to get it dry?
We use two sizes: 1.2 meters x 0.6 meters x 50 mm thickness and 0.6 meters x 0.6 meters x 50 mm thickness. Needs around 6 - 7 days to get required strength
nice
چگونه بتوانیم از زبان سازنده حالی بشیم که چه موادی را قاطی میکند
you have to translate it from English to your language www.pioner-group.com/concrete
Manufacturer of intelligent manufacturing equipment for light steel structure buildings
Foshan FrameMac Technology Co., Ltd. (FrameMac) is a professional light steel structure building intelligent manufacturing equipment manufacturer in China, providing a fully automatic light steel building frame production solution integrating software and hardware. The "FrameMac" solution realizes the seamless connection of "end-to-end" production from CAD architectural design software to production processing, construction and installation.
what is the insulation value
Thermal conductivity for the material is 0.11 W / m*K . R Value and U Value depends on your wall thickness
انه رائع جدا
What PSi on this ?
Depends on concrete density, for 600 kg/m3 compressive strength is around 2.5 MPA
What is the liquid on the bottle?
It was liquid soap to make reaction faster. Here you can find the basic recipe www.pioner-group.com/concrete
Absolutely right answer
Армирования маловато, да и профиль не даст соединиться раствору.
Там термо профиль, с просечкой
Там армирование и не нужно, этотогрпждающая конструкция
Где дырки???? На видео их нет
Что за сказки, про бабку)))) а про щелочь слышали???? И как метал гниет от реакции???
@@костикмостик-д8т а через арматура не гниёт? И там он оцинкованный, гнить 200 лет будет
What is the UV for this lightweight concrete?
Thermal conductivity for 400 kg/m3 density is 0.1087 W/mK. R-Value and U-Value depends on your wall thickness
@@cellularlightweightconcret1499
89 mm thickness for the wall
@@khaderdiri9755 for 89 mm profile not possible to achieve U-Value 0.3 w/m2K with non autoclaved lightweight aerated concrete without extra insulation with rock wool or Polystyrene.
@@cellularlightweightconcret1499
Cool. I need autoclaved aerated concrete with this specs.
How can you send me quotation with such specs?
@@khaderdiri9755 we are working with NON autoclaved lightweight aerated concrete only. This is our website www.pioner-group.com/technology there you can find some more information about our products
Does it expand in the mould and does it bond to steel
Yes it does expand and bond to the steel
Why subtitles are not given?Peoples r not understanding what procedure is being adopted?
Pretty similar to a geopolymer
Most probably. In the video non autoclaved lightweight aerated concrete. Mix of ordinary portland cement, limestone powder, aluminum powder and water. Densities from 500 up to 1200 k/m3 with some additives it can be 150 k/m3
@@cellularlightweightconcret1499 i bet adding a little graphene would add allot more strength
👍🏻
@@cellularlightweightconcret1499 Please, could you inform where couldwefind the mix for 150K/m³ ?
hi i am interested on this pls
Hi. You can find more details over here www.pioner-group.com/concrete
ООО, пенобетон придумали... Скоро глинобит разработают)))
Это не пенобетон
@@cellularlightweightconcret1499 а что это? Газобетон? Цемент песок пудра
Какое-то видео не очом
Co za glupota
Very half-@ss