Thank you so much , this really educational I just made my own slider Thanks to u ... can’t wait to try it ,please keep making these videos there great 👍🏻
I’m from Florida about to try this. Looks sick. Hopefully I can catch a tarpon or a blacktip or something big. Thanks so much for the tutorial they don’t sell these over here cause no one uses them.
So I'm new to these as I'm from UK. I've made a couple but how do u connect to main line. Any demonstration please as the bar seems to stop it coiling on fully
It is hard to get this kind of slider in my place. Even though this video are from 6 years ago, it still usefull for newbie like me. Million thanks for educational video. Yewwww🤙🤙
I cast out an 8-10oz weight as far as I can down current. I use 80lb line from the slide swivel and I put a down rigger release clip on the end. I'll clip a large bait to it from another rod and let it go out... I do not pulse the rod back and forth like everyone else... I let the waves take my bait out slowly so I'm fishing the entire way down... If I get a bite the release clip let's my line go and I'm fighting the fish straight to the hook with no weight!
Aloha from Australia. Great tutorial. Now I don't need to buy these sliders for a small fortune. Can you please make a video on how to make the stopper? I don't mean a stopper with a ring but the other one with the hook to lock your slider from going backwards once the bait hits the stopper. Cheers.
Preferred Stock you need to keep tension on your line at all times then it can’t go backwards that’s why it’s made on that certain angle so with tension on the line the slider can’t go back up the line
I get them for $10 with the stopper from a guy I know who hand makes them. They're not the cheap washer stoppers either. My stoppers are about 4 inches long with a hook to stop the slider from going backwards when a fish is hooked.
Out of curiosity, does this cause abraision to the line at all? I like this method as it deffanatly would make life easier. Need mine for diy slip floats. Where I'm at they simply don't exist. And where I'm from that's all we use. I found a simple way to make the float but it needs a sinker slide. So now I'm looking for a easy and effective way to make them. All the things we do to get that fish lol. But as this is riding topside I need it to not stress my line. Be a real bad day to loose 30 foot of line and tackle lol
tiDEHUNter 13 gauge bale wire and you can buy it from Home Depot or ace hardware or any hardware store. Or you can use the Bale wire that they use for recycled boxes.
H Zoonka what ever your preference up or down doesn’t really matter. I like it upwards cause it easier to put the line in. The theory is now anybody get the idea on how to make one Thanks for watching.
Not sure if anyone noticed but there is an extra loop on each side of this which means you can’t thread the line over the loops to put it on your main line the way it’s supposed to go, hold from the start with pliers and go under and over only once each side not twice. Problem solved.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thank for your knowledge l really learn something new and it will save me a lot of money this summer. You're the best!!!
Lmk and mahalo for your time.
Yes sahh. One Love
Hey Sergio i ran out of wire hahahahaha, my fault thought. totally enjoying doing this your tutorial makes it so easy to do, respect
I use this idea when I put together a trolley rig and it works pretty darn well
Thank you so much for teaching me how for make this. Just finished my first one. Came out cherreh🤙
420kealoha you’re welcome. Thank you for the humble comments.
I'm going to give a like just because you are making a RUclips video at work. thug life 4ever
Pak De 😂😂 thank man. For the love of fishing
Thank you so much , this really educational I just made my own slider
Thanks to u ... can’t wait to try it ,please keep making these videos there great 👍🏻
Didn’t post for a long time but you can message me for anything fishing related and I’ll be happy to guide you there. 🤙🏾🤙🏾
I’m from Florida about to try this. Looks sick. Hopefully I can catch a tarpon or a blacktip or something big. Thanks so much for the tutorial they don’t sell these over here cause no one uses them.
Hi thanks for the tutorial. What size bail wire do you use?
louis ramirez 14 gauge wire
Awesome unko, even at work! 😂😂🤙🏽
SiahFiyah 😂😂. Anything for fishing.
Thanks for the video I just made three sliders with a medal hanger
Tui Vavau you’re welcome. One Love
Lmk how the hangar holds up
great vid man and no special tools i like it gonna try to make me some
This is awesome man! I've got some wire and now I'm going to try to make a non-return version of this.
ukfrosty good luck. Thanks for watching
So I'm new to these as I'm from UK. I've made a couple but how do u connect to main line. Any demonstration please as the bar seems to stop it coiling on fully
Stuart Coyle like this
ruclips.net/video/plU1yhdE594/видео.html
Stuart Coyle if you have a face book page. Check out Ultimate Addiction and watch the video
hello,go to Tackle International for a good demo on how to connect to main line,
It is hard to get this kind of slider in my place. Even though this video are from 6 years ago, it still usefull for newbie like me. Million thanks for educational video. Yewwww🤙🤙
You’re welcome
Good job..so easy..
Le pouce de je suis satisfait 👍 👌 🎣 👍 👌 🎣
I cast out an 8-10oz weight as far as I can down current.
I use 80lb line from the slide swivel and I put a down rigger release clip on the end.
I'll clip a large bait to it from another rod and let it go out... I do not pulse the rod back and forth like everyone else... I let the waves take my bait out slowly so I'm fishing the entire way down... If I get a bite the release clip let's my line go and I'm fighting the fish straight to the hook with no weight!
I do almost similar with your style.
mate you are a legend !! thanks for the awesome vid !!
Tony Va'a thanks mate. For the love of fishing. I Will share knowledge and tricks
Aloha from Australia. Great tutorial. Now I don't need to buy these sliders for a small fortune. Can you please make a video on how to make the stopper? I don't mean a stopper with a ring but the other one with the hook to lock your slider from going backwards once the bait hits the stopper. Cheers.
Preferred Stock you need to keep tension on your line at all times then it can’t go backwards that’s why it’s made on that certain angle so with tension on the line the slider can’t go back up the line
Yeah I already know that, I don't think you understand what I mean about the other stopper without the ring. Not to worry.
Preferred Stock I get them from a bloke on ebay $20 for 5 delivered mate, I think he is in QLD
I get them for $10 with the stopper from a guy I know who hand makes them. They're not the cheap washer stoppers either. My stoppers are about 4 inches long with a hook to stop the slider from going backwards when a fish is hooked.
Preferred Stock I will make a video when I have time. Thanks
Nice man this will save me a lot of money and what she go when you hook like one 30-40lb ulua mahalo for posting 🤙🤙
Automatic.
Out of curiosity, does this cause abraision to the line at all? I like this method as it deffanatly would make life easier. Need mine for diy slip floats. Where I'm at they simply don't exist. And where I'm from that's all we use. I found a simple way to make the float but it needs a sinker slide. So now I'm looking for a easy and effective way to make them. All the things we do to get that fish lol. But as this is riding topside I need it to not stress my line. Be a real bad day to loose 30 foot of line and tackle lol
Joe Spawldin it should not cause any abrasion to your line if you don’t scratch your wire within the twist
What kind of wire u r using bro?
Gregory Nansen galvanized wire 14 gauge. Any hardware store should have it.
How’d you straighten out the wire? Gonna go Home Depot soon
And can I use 12gauge for more strength
use stainless steel welding wire 316,
Bueno 👍👍👍👍🦈🦈🦈🦈🦈🦈
J'aime beaucoup la pêche 🎣 poisson 🎣 🐟 🎣 🐟 🎣 🐟 🎣 😃😃😃😃😃🙂🙂🙂🙂💪💪💪💪👍👍👍👍👌👌👌🐟🐟🎣🎣🎣😎😎😎
👌👌
very cool stuff!!! thanks...
thank you so much!!! very easy
프로감각 you’re welcome
Nicely done.
wei ying Thanks
WONDERFULL I just make..
Could I use 316 stainless steel for making these?
Mike Wilson yes but you gonna be needing a rubber grip vice grip to hold it down
What size and where to buy bell wire
tiDEHUNter 13 gauge bale wire and you can buy it from Home Depot or ace hardware or any hardware store. Or you can use the Bale wire that they use for recycled boxes.
tiDEHUNter you can buy it from ace or Home Depot. 14 gauge galvanized wire or you can use the bale wire that they use to recycle boxes.
VG video
Thnk u thnk u
surely the middle section[first bend]must face down and not up.
H Zoonka what ever your preference up or down doesn’t really matter. I like it upwards cause it easier to put the line in. The theory is now anybody get the idea on how to make one Thanks for watching.
Where can I buy the bale wire?
Eleomar Cabbat is you live in Maui . You can get them from Maui Disposal or try Home Depot
Buy argon 908 907 welding rods- more durable and you can buy it individually, easy to work with
Not sure if anyone noticed but there is an extra loop on each side of this which means you can’t thread the line over the loops to put it on your main line the way it’s supposed to go, hold from the start with pliers and go under and over only once each side not twice. Problem solved.
Ytanythinggoes the idea on this video is now you have a hint on how to make one. You can either modify it to your preference. Thanks for watching.
Muito bom.
Thank you
Anytime. Glad I can help
Abu from Simpsons
Mean slide. ... cherry
nice one.. looks like get choke hangers from hotel lol
ritzkai it’s not a wire hanger but you can use wire hanger as well. This is a bale wire that we use for recycle cardboard or boxes.
Exactly what kind of wire do you use?
Micah Gouveia Bale wire its galvanized
Micah Gouveia or you can use wire hanger or on this video I use bale wire that we use for our recycled cardboard.
Micah Gouveia 2mm stainless steel or welding wire
Arnold Rugnat welding wire might be too weak
Braddah at work while making YT fishing video. Lol
Sweet
This is boss
Cape Fox Yeap. 😂😂
Thanks for sharing 👋🏻👋🏻
At work and all lol
Shouldn't you be working instead of making fishing gear? Lol
It’s part of the job benefit for being a boss. 😂😂