Alarm.com TL880 Communicator Installation and Setup on DSC PowerSeries NEO Security System

Поделиться
HTML-код
  • Опубликовано: 4 ноя 2024

Комментарии • 13

  • @msafirijaffary7089
    @msafirijaffary7089 9 месяцев назад

    Need to know the procedures on how to configure TL405LE Tyco
    communicator

  • @johnnada3377
    @johnnada3377 Год назад

    Don’t you also need to enable alt com auto for the receivers(s) in section 300?

  • @ramnauthrobin4568
    @ramnauthrobin4568 2 года назад

    Hi Hayden, can please make a video on how to configure the TL280 module or the TL2803G module or the 3G2080, internet connection activated or via sim card.
    Thank you in advance.

    • @andybowman9697
      @andybowman9697 2 года назад

      You can't just pop any sim in these. They only work activated via Connect 24.

  • @NicksLock
    @NicksLock Год назад

    Does the communicator require a cellular subscription?

    • @AlarmSystemStore
      @AlarmSystemStore  Год назад

      The cellular service is part of the alarm dot com fee charged. See here:
      www.alarmsystemstore.com/collections/alarm-com-services

  • @uniteddrones7626
    @uniteddrones7626 2 года назад

    Would there be a scenario where you would have to choose between units on pc link 2? Or is that just for tl communicators

    • @AlarmSystemStore
      @AlarmSystemStore  2 года назад +1

      PC-Link 2 is exclusively for communicators like the TL880. We do not carry, nor have I seen any other devices that can use it.

  • @harveysign
    @harveysign Год назад +1

    Do u sell ADC 4g cell radios

    • @AlarmSystemStore
      @AlarmSystemStore  Год назад

      Yes we do, here are all of them we carry:
      www.alarmsystemstore.com/collections/alarm-com-communicators
      and here is the service for them:
      www.alarmsystemstore.com/products/alarm-com-interactive-residential-services
      We will be offering monthly plans as well within the next couple weeks..

  • @mikeyd4390
    @mikeyd4390 2 года назад

    You did miss the TLM setting

    • @AlarmSystemStore
      @AlarmSystemStore  2 года назад

      TLM isn't specifically relevant to the installation of the TL880 in so we don't cover it in this video. Many people leave a phone line connected to the panel anyway. We do cover TLM in our general programming vids though.

  • @randyaivaz3356
    @randyaivaz3356 Год назад

    Fukkkad Popped up writing this when almost done, twice$$%%%%$$
    Search "RJ31X" 8 pin Jack. Need to wire 4 of the 8 conductors to Alarm Panel with an RJ31X Cord.
    Red/Green/Slate(gray)and Brown. Center 2 Pins are usually red and green, and next 2 pins outward usually yellow and black are line 2 on a RJ11.
    RJ 12 is 6 pins.
    Converting the old Quad wiring(Red,Green,Yellow,Black)to Category Rated Wiring is
    White/Blue to Green
    Blue/White to Red
    White/Orange to Black
    Orange/White to Yellow.
    Red is Negative with respect to Green.
    Will need a 4 conductor cable from where phone line Starts.
    Basically Dial tone goes in on a pair(red/green?)to RJ31X. Second Pair from RJ31X will go back to start of phone connections and connect to ALL House Phones.
    With RJ31X Cord unplugged,
    Dial Tone Goes to 31X Jack, then return on second pair to connect to house phones. When you plug the Cord in, it seperates the 2 jumpers in the jack so now It Disconnects the House(Premise)Phones.
    Without Line Seizure(RJ 31X). Panel cannot dial wth a Phone off the Hook. Is why they are used.