my same white capacitor for the same european model is 2j 183j /09 sic 460s/49.it shows 17.5 nf!it is ok?what else should i change proactively?all electrolitic capacitors you reckon? cheers frtom Greece ]
grazie! sostituito con condensatore 22nF/630V invece di 18nF e va bene lo stesso. Prima aveva questi sintomi : no audio , retroilluminazione sfarfallava, se si spegneva faticava a riaccendersi, le tensioni in uscita dalla power board erano tutte basse.
hi as in the video the white rectangular decoupling cap (marking 183j) located on psu @ CM808 was my problem, I replaced it with the grey one of same value 18nf 630v (marking 183j). You will have to take out the power board and de-solder the cap and re-solder in the new one. Do you have electronic or electrical experience? if not it will be hard for you to tell if the cap is bad. My one was only reading something around 12pf when it should have been around 18nf give or take I bit. Also my be the integrated power switch or secondary side caps, but my guess is if you are having same problem( you must have red standby light on and the tv must not try to turn on) it's more than likely that cap is the problem. If you need more help let me know. Part links below. part link: uk.farnell.com/cornell-dubilier/dme6s18k-f/capacitor-poly-film-0-018uf-630v/dp/1260945 tech sheet link: www.farnell.com/datasheets/1747035.pdf part link: www.digikey.ie/product-search/en?pv1293=36&FV=fff40002%2Cfff80010&k=0.018uf&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25 (any in this list)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thanks man, i had same problem, no wake up from stand-by mode, just replaced the cap and my TV works again :)
Thank you! I replaced it with old soviet cap 22nf 630V and it works perfectly!
Hi, I have same model like you and same problam.What I do? Please help .
my same white capacitor for the same european model is 2j 183j /09 sic 460s/49.it shows 17.5 nf!it is ok?what else should i change proactively?all electrolitic capacitors you reckon?
cheers frtom Greece
]
grazie! sostituito con condensatore 22nF/630V invece di 18nF e va bene lo stesso. Prima aveva questi sintomi : no audio , retroilluminazione sfarfallava, se si spegneva faticava a riaccendersi, le tensioni in uscita dalla power board erano tutte basse.
Tnx you dear.....! You helped me fix mine..!!!!!!
your welcome
Thank you very very very much it was useful
Thank you very much
your welcome
would this capacitor be a good substitute?
www.chsinteractive.co.uk/electrical-components/xtra-parts/capacitor-18nf-630v-radial.htm
yes that will do just fine
hi as in the video the white rectangular decoupling cap (marking 183j) located on psu @ CM808 was my problem, I replaced it with the grey one of same value 18nf 630v (marking 183j). You will have to take out the power board and de-solder the cap and re-solder in the new one. Do you have electronic or electrical experience? if not it will be hard for you to tell if the cap is bad. My one was only reading something around 12pf when it should have been around 18nf give or take I bit. Also my be the integrated power switch or secondary side caps, but my guess is if you are having same problem( you must have red standby light on and the tv must not try to turn on) it's more than likely that cap is the problem. If you need more help let me know. Part links below.
part link: uk.farnell.com/cornell-dubilier/dme6s18k-f/capacitor-poly-film-0-018uf-630v/dp/1260945
tech sheet link: www.farnell.com/datasheets/1747035.pdf
part link: www.digikey.ie/product-search/en?pv1293=36&FV=fff40002%2Cfff80010&k=0.018uf&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25 (any in this list)
same fault-LED BLINKS ,SWITCHES OFf immediately,no brightness ,led turn on red again