Appliance Tech Talk - Maytag Stack Washer and Dryer

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024

Комментарии • 14

  • @donna57
    @donna57 3 года назад +3

    Where can I find an owners manual,

  • @brianholliday4083
    @brianholliday4083 2 года назад

    could you tell me the color of the 3 wires on front side of washer timer, I was following your video and mine came of somehow when I rotated the timer around

  • @jeremyjohnson1137
    @jeremyjohnson1137 3 года назад

    When replacing the drum does the felt go on the inside or outside

  • @jason3000tt
    @jason3000tt 2 года назад

    Hi, my valves are reading 1,660....is this ok?

  • @generidgeway8002
    @generidgeway8002 Год назад

    washers not getting power at all dryer runs fine the dryer to washer connection harness I need image of proper pin alignment

  • @ronaldfranck6960
    @ronaldfranck6960 Год назад +1

    Damn, nobody ever shows you how to remove or replace the front washer panel on a stackable Maytag. They always have the front panel aready removed when videotaping the components inside the washer. I've looked everywhere on RUclips. Frustrating. (I didn't remove the panel myself, the previous owner removed it herself and I question if she gave me all the components. Maytags cabinet diagram doesn't provide any clues on how to re-attach the panel.)

    • @metalicametalica8754
      @metalicametalica8754 Год назад

      😂😂😂i can help u,contact me if u still need...😂😂😂

    • @AlexOvechkinSucks
      @AlexOvechkinSucks Год назад

      @@metalicametalica8754 do you know of any videos online that explain it?

    • @AlexOvechkinSucks
      @AlexOvechkinSucks Год назад

      I’m in the same boat now. Did you figure it out?

    • @metalicametalica8754
      @metalicametalica8754 Год назад

      Nop,not on line yet...

    • @ronaldfranck6960
      @ronaldfranck6960 Год назад

      @@AlexOvechkinSucks Have you tried slipping the thin blade of a putty knife between the front cabinet and the top lid, two places, one left, the other right. This should release two clips holding the lid in place on the front of the cabinet.

  • @scucci
    @scucci 6 месяцев назад

    I JUST got done replacing one of the lid switches on an LSE7804ACE.. Whatever engineer thought it was a good idea to put the switches back there instead of ANYWHERE near the front panel... you know, the one you only have to take off 2 little screws for? ... I hope that guy had ONLY bad things happen to him for the rest of his life.

  • @cathyfan7223
    @cathyfan7223 8 месяцев назад

    Anyone know how the washer unit it attached to the back bracket/dryer cabinet? mine seems to be loose, but I can't fine what I am missing