Thanks for the quick sight in steps. I used two old AA batteries wrapped in tin foil. One for the aim point and the other for the impact point. I also picked up on a "Hoo-Yah" at 6:02 on your video. Retired at 25 years. East coast.
I just bought one of these for a rifle build, but decided to toss it on my cheapy KelTEC Sub 2000, and see how it may do with mice plinking. Granted, due to the far forward rail, I was left holding the rifle with the buffer tube over my shoulder, but it didn't stop the fun! Mice look like fireworks when you tag 'em! 😅 Love this scope!
Make sure that those throw levers are super tight you don’t want any play in it. other than that you should be able to walk it right in if you have a solid hold and a good heat signature down range
@@wehunt7 I’m definitely ganna try what you did this weekend. The scope itself is absolutely awsome! I just can’t swap calibers easily with a quick sight in. I will definitely try what you did this weekend tho.
Barrel could be inconsistent. But i would just make sure you are shoot the same rounds threw it and should be good! When you go to switch it to another gun you’ll want to use a new reticle and sight it in with the other gun hope you get it dialed in!
Thanks for the quick sight in steps. I used two old AA batteries wrapped in tin foil. One for the aim point and the other for the impact point. I also picked up on a "Hoo-Yah" at 6:02 on your video. Retired at 25 years. East coast.
Just what I needed. Thanks for posting.
I just bought one of these for a rifle build, but decided to toss it on my cheapy KelTEC Sub 2000, and see how it may do with mice plinking. Granted, due to the far forward rail, I was left holding the rifle with the buffer tube over my shoulder, but it didn't stop the fun! Mice look like fireworks when you tag 'em! 😅 Love this scope!
I’d imagine the 9 just plays them lol
I take tape, aluminum, fasten tape, use an air conditioning and draw a crosshair on a piece of cardboard with it. It shows up great.
The video starts at 7:30. (Still lacks the IMPORTANT stuff your here for).
What would you like to see? This is just how I have sighted in my thermal
Make sure you down load the newest firmware update. Had some cool features
How did you mount your tripod without using the sling swivel? Thanks
Arca rail
How far were you from target at sight in? Thanks
50 yards normally
Dude this thing has been a nightmare to sight in. The sight in process is the worst process of any scope I’ve ever delt with.
Make sure that those throw levers are super tight you don’t want any play in it. other than that you should be able to walk it right in if you have a solid hold and a good heat signature down range
@@wehunt7 I’m definitely ganna try what you did this weekend. The scope itself is absolutely awsome! I just can’t swap calibers easily with a quick sight in. I will definitely try what you did this weekend tho.
@@wehunt7 I also ordered a new 300 blackout. It could also be my barrel on my 5.56 I’ve sent like 3000 rounds threw it 😂 we shall see!
Barrel could be inconsistent. But i would just make sure you are shoot the same rounds threw it and should be good! When you go to switch it to another gun you’ll want to use a new reticle and sight it in with the other gun hope you get it dialed in!
@@wehunt7 you think I should try a different style reticle? I was using the one with the dot in the middle like in the video
mine came with the included ADM mount but it wasnt cantalever. Any details on that?
I’m not sure! I’ll have to look into that
Use One Shot zeroing!
Tried this. Not sure what I'm doing wrong but it's not working
Could be the barrel is bad or ammo is inconsistent! The scope could potentially be bad also but I’m not sure
@@wehunt7 I figured it out. Cheers
That's definitely not a 22lr💥😂😂😂👍
This target is way to big man
Pocke a hole and put a cigarette in light it up and shoot the cigarette is the most expensive way to do it
5 minute job with45 minutes of annoying voice yapping