Changing Out Airlock Seals on a CM2400 Insulation Blower by Cool Machines

Here is a comprehensive video on how to change out the airlock seals on the CM2400 insulation blower by Cool Machines.
The video covers CM2400s of various airlock sizes and for those with a PD blower.
As we work on the other machines, we will make videos for changing out those airlock seals as well but in the meantime, the same basic instructions apply for all the Cool Machines blowers from the CM700 all the way up to the CM4500XL.
*Tool List for Changing Out Airlock Seals of the CM2400*
9/16" Wrench
5/16" Hex Key
Large Pipe Wrench with Rag
1/2" Wrench
1/2" Socket with Wrench or Cordless Rachet
Flat Screwdriver
Grease Gun: High Temp Grease
Chain Lubricant: Wax Based
Additional Tool for CM2400-20"
1-1-4" socket or Crescent Wrench
Look for our playlist here on RUclips for more videos about maintenance and repair of blowers by Cool Machines.
Comprehensive video for changing out airlock seals on a CM1500: • Maintaining and Changi...
Short video for changing out airlock seals on a CM1500: • Changing the Airlock S...
Thank you to the following contractors for allowing us to film on-site:
Net Zero Insulation Technologies, Warwick, Rhode Island
CPI Insulation, St. Cloud, Florida
Florida Attic Professionals, Sebring, Florida
Contact us for more information.
Find us ONLY as:
Insulation Machines
Barry Pendley
877-909-USMADE
InsulationMachines.net
Copyright © 2023 by Barry Pendley
All Rights Reserved.
#insulationblowers
#airlock
#insulationequipment

[@ОльгаПугачева-щ5з]

Have you tried making an air castle from a sheet of polyurethane? I cut 3mm (0.12 inches) from a sheet today, I’ll try it one of these days.
​