DIY Woodworking Useful Stuff

This video is a compilation of dismantling a pallet, using a trim router, building a circular saw track saw jig, using a the diy circular saw track saw jig, setting up a plunge router and fitting a plunge router under a table.
Dismantling a pallet can be a straightforward task if approached correctly. First, you'll need to gather the necessary tools, such as a crowbar and. Begin by removing the nails from the top deck boards with the crowbar and hammer, being careful not to damage the wood. If the nails are particularly stubborn, use a reciprocating saw to cut through them. Once all the top boards are removed, repeat the process for the bottom boards. This method ensures that you can salvage as much usable wood as possible from the pallet.
Using a Bosch GKS190 Professional Circular Saw to build a cheap track saw jig for a circular saw is a cost-effective way to achieve precise cuts. Start by cutting a piece of plywood to the length and width of your circular saw's base. Attach a straight edge or a strip of hardwood along one side of the plywood, ensuring it is perfectly straight and perpendicular. This will act as the guide rail for your saw. Secure the palm router to the opposite side of the plywood, making sure it is aligned with the guide rail. This simple jig can transform your circular saw into a track saw, providing accurate and straight cuts every time.
The Bosch Professional GKS190 circular saw can be effectively used on the jig you created. Place the saw on the plywood base, with the blade aligned with the edge of the guide rail. Secure the saw in place, ensuring it moves smoothly along the guide. Before making any cuts, double-check the alignment to ensure accuracy. Once everything is set up, you can begin cutting your material by following the guide rail. The combination of the Bosch GKS190 and the DIY track saw jig will allow you to make precise and clean cuts, ideal for any woodworking project.
Setting up the Ryobi RE1220A plunge router is a straightforward process. Start by attaching the appropriate bit to the router, ensuring it is securely fastened. Next, adjust the depth of the plunge mechanism to the desired cutting depth. Secure the router base to your work surface or router table if you have one. Once everything is in place, connect the power supply and turn on the router. Always wear appropriate safety gear, such as goggles and ear protection, when operating the router. With these steps, your Ryobi RE1220A plunge router will be ready for precise and controlled routing tasks.
Installing the Ryobi RE1220A plunge router under a router table can enhance your woodworking capabilities. Begin by detaching the base plate from the router and securing the router to the mounting plate provided with your router table. Ensure the router is centered and firmly attached. Once mounted, adjust the height and depth settings according to your needs. Connect the power and test the setup with a scrap piece of wood to ensure everything is functioning correctly. Installing the router under a table provides better control and precision, allowing for more complex routing tasks and consistent results. ‪@woodywood3715‬