I have now played around a little with clear Water Fairy. It is really surprisingly fluid and therefore easy to print. Washing is also wonderful, a lot of resin is already flowing away because it is so fluid. But I also have negative things to report. I overexposed a small figure with a sword in the Elegoo curing chamber. At least that's what I assume because the sword broke off with a slight impact. The thicker arm was stable and even slightly movable. The next day, this arm also broke off very easily. I also have some colorants here that I used to color my W90B with. Perfect result with W90B. With Water Fairy, the colorant and Water Fairy separate too quickly. It prints well with colorant and looks good, but after about 5 cm in height the errors start. 12 hours without activity and the Water Fairy floats above the colorant.
@@godsaid4502 I have now tried some more, the bottle is not empty yet. The brittleness probably only came from too long post-exposure. The same model with only 5 minutes in the UV chamber and so far it has moved well. Let's see if it's still like this tomorrow. It could be that printed objects from Water Fairy should not be placed on the windowsill. I have also tested Monocure CMYK pigments and they seem to work well. No separation of resin and pigment visible. Unfortunately, this happens with my colorants, even if it takes hours. Nevertheless, I'll try it out again.
@@godsaid4502 The sword is now broken off again. After a few hours, the flexibility was gone and the very thin blade broke off extremely easily. The rest is still intact and minimally flexible. It is probably too fragile for very fine structures but otherwise cool, especially that it is so fluid. I dont have instragram
Thank you very much, I am currently testing a bottle of Transparent. Unfortunately it's a bit expensive on Amazon and the website says it's from China. I still have one question. Is this new, that you can lighten yellowed objects by boiling them, or does this work with all clear resins? This is the first time I've read that this is possible.@@godsaid4502
I have now played around a little with clear Water Fairy. It is really surprisingly fluid and therefore easy to print. Washing is also wonderful, a lot of resin is already flowing away because it is so fluid. But I also have negative things to report. I overexposed a small figure with a sword in the Elegoo curing chamber. At least that's what I assume because the sword broke off with a slight impact. The thicker arm was stable and even slightly movable. The next day, this arm also broke off very easily. I also have some colorants here that I used to color my W90B with. Perfect result with W90B. With Water Fairy, the colorant and Water Fairy separate too quickly. It prints well with colorant and looks good, but after about 5 cm in height the errors start. 12 hours without activity and the Water Fairy floats above the colorant.
Much appreciate your feedbacks ，we are different will improve it .
@@godsaid4502 I have now tried some more, the bottle is not empty yet. The brittleness probably only came from too long post-exposure. The same model with only 5 minutes in the UV chamber and so far it has moved well. Let's see if it's still like this tomorrow. It could be that printed objects from Water Fairy should not be placed on the windowsill. I have also tested Monocure CMYK pigments and they seem to work well. No separation of resin and pigment visible. Unfortunately, this happens with my colorants, even if it takes hours. Nevertheless, I'll try it out again.
sure buddy ，if you find out any issue with the resin ，feel free to let us know .or you can leave me a meesage on instagram
@@Shadow27374
@@godsaid4502 The sword is now broken off again. After a few hours, the flexibility was gone and the very thin blade broke off extremely easily. The rest is still intact and minimally flexible. It is probably too fragile for very fine structures but otherwise cool, especially that it is so fluid. I dont have instragram
vs w90b?
W90B is going to sold out and not sale it anymore ，because some sort of missing ingredient.
@@godsaid4502 Oh ok, thanks. How does it compare to the W90B?
easy to wash and less smell ，will not crack when in the humility weather@@Shadow27374
Thank you very much, I am currently testing a bottle of Transparent. Unfortunately it's a bit expensive on Amazon and the website says it's from China. I still have one question. Is this new, that you can lighten yellowed objects by boiling them, or does this work with all clear resins? This is the first time I've read that this is possible.@@godsaid4502
Sounds exciting, too bad I cant get it in Poland ;-;
Hello, it is expected to arrive at the warehouse in Germany in mid to late December
it will arrived in EU warehouse by mid December
Hej ;) za kilka dni będę wrzucać testy tej żywicy więc jak coś zapraszam :)
Sure，buddy！@@ZygiArtStudio