How to Sand and Polish Epoxy Resin ? ADORABLE EPOXY RESIN CRAFTS AND DIY
HTML-код
- Опубликовано: 30 май 2022
- 10 CHEAP AND EASY DIY JEWELRY IDEAS 5 Resin Accessories FAIRY PENDANTS MADE OUT OF AN EPOXY RESIN
www.youtube.com/watch?v=QtLa2...
DIY Glass jar pendants! (Kawaii!) DIY MINI CHARMS IN A BOTTLE!
www.youtube.com/watch?v=XPVTq...
www.youtube.com/watch?v=w01Qr...
5 DIY JEWELRY IDEAS FOR TEENAGERS / 3 CHEAP AND EASY DIY JEWELRY IDEAS www.youtube.com/watch?v=38Odl...
5 CHEAP AND EASY DIY JEWELRY IDEAS DIY JEWELRY IDEAS FOR TEENAGERS
Thanks for watching in my channels , please subscribe me
MAGIC DIY EPOXY RESINE IMITATION EFFECT OUT OF POLYMER CLAY www.youtube.com/watch?v=FMB_9...
3 Resin Accessories FAIRY PENDANTS MADE OUT OF AN EPOXY RESIN www.youtube.com/watch?v=piU1t...
#diy #accessories #jewelry - Хобби
A person can really appreciate an art when you see the work that goes into it. Beautiful pieces!
❤❤❤❤❤❤❤ㅂ
Such beautiful, detailed work.
Thank you for these beautiful videos
Thank you, I really needed this video, because this is the only part I keep struggling with.. So thank you again for this..
Such beautiful work. I'll never look at a dandelion the same. This is such a helpful video.
Thank you for this video. My granddaughter made a sphere and the resin leaked out and it had a ring around it. I have been trying to figure out how to make it shine after the 5 sanding steps. Thank you again for this video!
When my friend makes resin items, he uses 180-400 grit dry and then 600-10,000 grit wet. Sometimes he'll continue with 12,000 & 15,000 grit wet. Comes out so shiny that a clear coat would make it a dull shine.
Best video I have seen on this subject. Explained a lot. Beautiful work. Thank you!❤
Good informational tutorial...but every time I see these dandelion seed pieces, it always amazes me that these umbrellas don't clump together
you are so talented and thank you again for your kindness to share this long process with us. It looks like a lot of work, but I think it is well worth it for the beautiful results.
Thank you for this! So helpful. I was enjoying your pink nails and then they went away. 😁 You have beautiful hands and your jewelry is gorgeous.
Thanks so much for this detailed tutorial. You have a new subscriber here from Nigeria.
Great video
I wonder how many times she's launched things across the room with her table grinder? 😂 woops!!!
Thanks for this video, it's very helpful!!
Thank you. It seems like almost every other video I see has talking that seems like it goes on and on. This is simple and to the point. If I could hug you I would cause it makes sense to me now
made in switzerland, haleluja!
Thank you for this video. I have noticed in your work that you do an incredible job of sanding and polishing your resin pieces. This will be a big help. Thanks!
Always appreciate your videos. This video makes me want to return to this craft again. Thank you for the inspiration. 💎
Thank you SO MUCH for sharing your complete process! Your results are always so gorgeous! Thank you!!! That was so much help!
ThankYou SoMuch for Yr Video
🤗🤗
Awesome, awesome, awesome!!!
Thank you so much for showing 2 methods of sanding, polishing, polishing compounds and tools used.
I can see how each method can be used on different resin projects.
Again, thank you!!
Great Work 😌 Gorgeous Lady 💕
Muito lindas as peças ❤
thank you for sharing! 💕
Very useful video for resin artists like me. Thank you so much for sharing.
Brilliant video I have made quite a lot of resin pieces but have only used a nail file around edges, not actually sanded the whole thing as not been brave enough. Thankyou.xx
Lovely. Thanks !!!!!!!!!!!!
Thank you so much for shooting that video I always asked you to show as the whole process... thanks 😊 🫂 💜💐😘
Thank you for showing your process !!! :)
thanku sooo much 🙏🙏for sharing this video.. 😇
Excellent! This was perfect for me to learn and follow. Thank you.
Thank you, and beautiful, I’m a big fan of you, so impressed with your work, so kind of you , for sharing your beautiful ideas 👍🏻❤️
thanks for sharing. This was very informative
Gracias,hermoso trabajo,saludos
Thank you for one of the best and easiest videos! I guess I just need to send a bit longer. This helped!😊
Hard work but gorgeous. thank you for sharing
Thanks 😊
Just amazing ❗😆
Very nice. Thank you fro your time :)
Thanks for sharing. I always ruin my resin whenever I polishing it. This really helpfull. Maybe you can teach how to polish if the shape is more like diamond
👏👏👏👏Excelente
Grazie!!!!
hermoso
I am new to resin and wow that looks like a lot of work lol! But the finished product is beautiful!
❤️
Very 👍😊😊😊
Hola, hermoso trabajo, me podés decir usás para que brille la pieza luego de lijar?
😍🥰😍
❤❤
Thanks for your tutorial! Please tell me the kind of/brand hand held tool you used to sand. ❤
Bit late to the party lol. But the process of putting the resin in hot water for 20 minutes to get air bubbles out.
Is that once its mixed up and ready to pour that it's placed in the water?
3:55 - Did you use a torch to get rid of bubbles?
🤗😍👏
👏👏👏👏👍😍
Hi there.. I don't have all these machines n polishes.. what should I do then
😍🥰❤
Really good video, thank you for sharing. ☺ Where have you bought this polishing paste and the papers? Thank you😊
Your work is good, i
Is there any process of buying it?
Been enjoying your posts, could you please let me know what the final metal attachments you resin into your sphere, thanks from Australia 🇦🇺
Is it necessary to always sand & polish every piece? I’ve seen some people pull their resin work out of the mold & it looked fine. Is this only if it’s cloudy?
Какой адский труд!
Где вы покупаете наждачку? В автомагазинах или хозяйственных?
Инструменты у вас классные.
Я начинающий эпоксидник, это интересно, но мне ещё расти и расти.
В автомагазине))
Thank you so much. You do beautiful work! I love your videos. Where do you get your molds for your little spheres? I see that you have to replace them every so often.
Ali Expess. 🙂
Спасибо🙏💕. Всё понятно без слов 😊😘
😘
@@freshidea8109 how to do this mold ? Please
Where do you buy your hardware? For the jewelry.
Супер! Очень классно!
Светлана, а Вы используете вакуумизатор? Я пробовала пару раз делать разные кулончики из смолы разной вязкости, но пузырей всегда была просто тьма...
Я не использую дегазатор, я использую очень жидкую смолу в инстаграм всем делюсь @ sveta.fresh Но дегозатор конечно же не помешает всем мастерам, с любой смолой можно будет делать идеальные работы))
Hi ! I’m french so sorry for my bad english are you doing this process for all resin jewel ? I love your work thank you for your share ! 👏🌸😘
I also use a translator)) I do not process all products, some products do not need it)) J'utilise également un traducteur)) Je ne traite pas toutes les marchandises, certains produits n'en ont pas besoin))
Que quaway WuW
Can you show us (or reply) which resin you use to make your balls that you drop alcohol inks into that are all swirly? I adore your projects & would love to know. Thanks so much 🙏🏼💕
not sure if you found what you were looking for. I use mica powder when doing epoxy projects and spray rubbing alcohol to give it a nice pearling effect. Hope that helps
Love your videos. Very satisfying. Do you have any Shop where i could buy these ???
Try to look on the Internet, I really hope that you will find everything you need))
@@freshidea8109 irresponsible.. U should type a link so tat ppl can buy with ease
You have pretty, feminine hands. Very clever, putting the sandpaper on a towel, to better conform with the shape of the sphere. I see many crafters sanding resin-coated tumblers with sanding blocks - the opposite of what should be used.
I'm intrigued by the tool you referred to as a mini Dremel. What is it? The fact that it uses a regular chuck key suggests that it might be a quality tool. I'm curious.
It’s a mini drill, you can get them with lots of attachments on Amazon ideal for all hobbies
!.........💝💝💝💝💝 NICE 💝💝💝💝💝........!
thank you for sharing.. what kind of polish paste and machine can we find in India would you happen to know?
I think that India also has these materials)) I really hope that there is a paste 3 M No. 75))
How many times did you use the mold before it went bad?
Somewhere 20 - 25 times
Always top, the secret Is. NO Bubbles Brava!
And if I don't have the grinding motor?
You can buy a mini dremel )) It's cheaper and very convenient ))
Спасибо! Не могли бы Вы сказать, какой пастой Вы полировали ?
3М номер 75
@@freshidea8109 Благодарю! Смотрю Ваши видео с большим интересом. )))
🤗🤗
Hello, amazing work. May I ask what polishing compound you used? I’ve only just started and not sure if there are specific ones especially for epoxy resin. I was given a Polish from a car care store but it’s not doing anything. Thank you
Did you watch the whole video??
!!!!!!!!!!!!!
А что за щеточка, которой вы промазываете отверстие для петельки? Это что-то зубное?
Пластиковые зубочистки)
А почему бы не транслировать на 2х языках?? Вы же вроде русский блогер...
The video is interesting and useful, but I hope you know the risks of using this with your bare hands and breathing the fumes. Shit is poison.
On second thought I need to buy that polishing rag for the machine. Why did you choose to do the rest after 180 by hand and not by machine?
I just don't get it... You use wet sandpaper and you sending it dry?!?!?!?! Wetting it makes sanding much faster nad acurate. Water takes away the dust - sanded particules - away and you always use clean sanding surface. Sanding it the way you do - after few moves you are clogging the spot which is clearly seen on your vid plus you making dust that you can braethe - not too healthy.
Most of the time I do everything with water, but when I need special control over the shape I prefer not to use water. In the water, it will be hard for you to see how much you have worn off.
painfully slow
What she doesn't show, is you need a very good mask and actually a respirator to even do this. The dust from epoxy is very dangerous to inhale. I think you should probably be wearing gloves too. I do enjoy her videos, but she doesn't answer questions or tell you what you all need to do.
I show ideas, there is no tutorial in this blog. Sometimes I show all the steps and all the details, but I am not responsible for your safety, please consider this. Bloggers work both with the camera and with resin at the same time, and it is very important to feel your fingers when I work with the camera. There are always working conditions and safety measures on the resin packaging.
Not everyone watches every one of your videos if you've posted about safety before. At the beginning of each one of your videos you should tell people the proper safety equipment you use. That's the responsible thing to do.
thank you so very much. I was wondering how you made all your pieces so beautiful 😍 now I know
❤