This is great! I’ve been looking for a “recipe” for going 100mph with an ARRMA Limitless! Thanks for assembling all of the components (including motor)!
So how does the Transmitter calculate the speed? It receives RPM data from the car - is there some setting that converts RPM to speed in the controller (as difference gear ratios would affect this calculation)?
It is a built in calculator in the transmitter. It takes the gear ratio, RPM of the motor, and the roll out of the drive train and boom, you got mph/kph
@@SpektrumRCvideos How Do You Get The DX5 Rugged To Show MPH??? I Have The DX5 Rugged & It Came With With The Spektrum SR6200A, How Do You Get It To Show MPH On The DX5 Rugged Transmitter???
Very nice. Doesn't take much to crack 100mph these days and now with this new tech, it's even safer. It's amazing how far this hobby has come. Outstanding work. Interesting motor choice... 🤔 Why not just use the motor from the Super Rock Rey?
Because a rey 750kv motor doesn't have the RPM, Its all torque, on the limitless you need both, thats why a 1250kv motor is perfect, for this application, and its weight.
Always get minimal info on these videos. How did the ESC fit in? What Gearing? Motor looks like a different one than first shown. I'm sure no details were given because it was not an EASY install.
Its the 1250kv motor with the 160a esc combo that they sell...In order to fit the esc in you have to cut the tabs off and the motor fits in just like it should and he's prbly just using what the car came with for the gearing. Most of the info is in the desc but he could've shown the stuff going in just by doing a time lapse.
Telemetry on the remote like that is awesome. The motor, esc and battery drop in cut was great. Good job video team. Let’s play a little game of “I spy” 👽 I spy something new. What is it?
Ok, ready to pull the trigger and get one, (wife said yes, so gotta move quick!) :) so, if you built one to corner and accelerate well and top end was not a concern and Spektum was all the goods inside, what we your build be? You put the list up, I will cut, paste and purchase. (Gotta beat neighbor, he is doing another build, so, help me here! :) Parking lot, court stuff, no long straight-aways.
got a ? got a habao vt build im doing usuing all spektrum smart same reciver and esc only 6 cell how can I get specs needed for programing esc for habao 2000kv motor
Nice I wished you'd mention how to fit the 160A esc in the limitless esc tray. The mounting tabs are in the way. Or did you replace the mounting tray from out of the Infraction or Felony? Otherwise you will have to cut the tabs off.
I have a quest about my Vendetta. As you know it has a 100amp ESC with the 3660 3900kv. I have been having much trouble with LVC. The car goes into a safe mode or limo mode, even when my 3s batteries are still full. I also have the Spektrum programmer and each cell is exactly balanced. Now I’m just staring to learn about the AVC feature. Can the AVC possibly be causing my car to go into Low Voltage Cutoff? I downloaded the latest updates for the box and Esc. I set the LVC to 3.2v and it still does it. I am merely trying to just drive in a straight line. Speedrun it. I mean it literally has happened everytime I’ve tried driving it. Any tips to lookout for? Please help. I did purchase this car direct from Arrma, maybe the Esc is bad? I don’t know but it is frustrating.
Hello, Just received my limitless today and Spektrum receiver. Any updates on the motor that was used. Noticed a 1/5 scale Losi due to be released soon has a Spektrum motor.
For our build we took a dremel cut off wheel to the mounting tabs and placed into the esc tray. Used some high quality double sided mounting tape. There are other methods as well but that took the least amount of modification.
Hey I just recently picked up the limitless and took my entire load out from my infraction and installed in the limitless just to see how it would run. Used the gear that came with the limitless and it’s running like crap. If I punch it, it just makes an awful noise I have to really ease into it. Any suggestions on what the problem might be? Everything worked perfect in my infraction.
Gearing. The limitless has that 36t spool and that is way to much for the box system. It might work better if u have a cap pack but you either need to change that spool out to a center diff or change ur system to something better
@@SpektrumRCvideos How do I set the roll out on the DX6R? It only accepts whole numbers, I tried 2.99" it shows up as 299. There is no(") sign on the numeric keyboard.
How did you get all that to fit? Motor and esc came today. With how you have it set up the motor wiers are not long enough and the esc dose not fit how you have it
Mike Ward the esc I cut the mounts off and double sided it in. Motor takes a bit of adjustment. Had to loosen the diff mount then pushed motor in and re tightened the diff mount
Correct the motor fits easy just have to work it in . HeAt sheiks will not work. Esc just cut tabs back just enough a screw will still hold . But I cut and just double sided tape. You can’t pull it out with the tape. Point the esc motor leads toward the motor.
Awesome, will the 160amp firma be a marketable diff from the 150am blx? Ive got all other spektrum smart tech including the dx5c/sr6100at so I figured it was the "smart" moves..... forgive the pun lmfao im just getting back into the hobby after 8ish years plus im new to electric cars so im trying to learn as much as I can. Is there a noticeable difference between 150amp and 160amp ? Plus I saw two different firma 160 models, one was $199 and the other was $209.99. Whats the difference?
@@jjirish81 on 6S, both of them should perform the same. BUT the 160 can handle 8S :) the 2 different Firma 160 are that one comes with a Capacitor pack which is there to help with voltage feedback when braking, which is good for speed run cars like the Limitless.
@@SpektrumRCvideos so with the 160amp the car will still shut down after 10ish min of running? I was hoping that it would run cooler and more efficient? Can you recommend an esc that will do the job?
Very cool stuff. Telemetry is a big part of my rcn experience. Have it in everything I own. Detects problems before they get real expensive. I wanna try this esc, looks very interesting especially with the future motor. Hope these new products hold up. Just a really fun component of the hobby 👍👌
Can I trade in my 1515 2200kv castle motor which got fried today!! Too much overheating 🥵 issues!! I got spektrum esc 160amps spektrum 4s lipos sr6100at receiver dx5 rugged transmitter!!! Just need the motor 1250kv spektrum plz help me!!!!!
I just bout the dx5pro and the hole set up this guy put in their litmitless and I just cant figure it out I can’t put my gps to work my litmitless feels like it won’t brake it takes off to fast my motor and esc trun hot in less the 10 min I’m just about done with this set up can’t get it to deal inn and when I put my Traxxas receiver everything just runs soso smooth need help
Brought this whole setup and the esc will not calibrate, im going to return all this crap, been trying every chance I get for 2 weeks, instructions sound real simple but it just does not work
Hi Mike, If you bought this whole setup then there would be no need to calibrate the esc, it is all precalibrated for Spektrum. What exactly is the issue?
@@SpektrumRCvideos car won't move and steering works fine. Couldn't calibrate esc. Last ditch effort I changed the reciever from the new sr6100at to a reciever that came with my dx4r pro and it works fine. In removing the 6100 I accidentally pulled off the antenna wire ruining the brand new 90 dollar reciever. I thought paring the smart esc, smart reciever, and smart batteries would be easy and give me full telemetry. It just would not work.
@@SpektrumRCvideos if you dident have to calibrate for spektrum it should say so in the manual. I wasted 2 weeks and ruined my brand new reciever in the process.
@@mikew9788 Feel free to mail in the receiver to us. We can get the antenna replaced. Sounds like it was not the esc that needed calibrated but rather the rx. Keep an eye out for our next self help video where we go into more depth on setting up the SR6100AT rx.
@@SpektrumRCvideos I calibrated the rx and it worked fine, full throttle, full brake, full right , full left, it worked and confirmed at every step, still did not work. I would love to get the antenna replaced and try again but something isn't right. Mabey it isn't compatible with my dx4r pro
@@SpektrumRCvideos 0:55 you need to edit your video. People are going to be overheating their gear trying to do tall pinion speed runs because they saw your video with 30c packs.
Well one great thing about Smart ESC and batteries is you can monitor the temps and set alarms to keep your equipment in check, with no extra modules needed. Great for speed running because heat is the leading cause of death in speed run models! #themoreyouknow . We will add that the 30c packs honestly did very well and nothing got beyond our temp alarm settings so we are confident they can handle this particular setup.
Unless the power output of this specktrum ESC is as good as Castle creations 200 amp ESC, you wasting our time. You should compare your ESC against castle's esc to prove your worth.
derjoh1986 this video is about using Smart Technology to get valuable telemetry, easily, without extra wires modules or sensors. We’ll leave the comparison videos up to you guys!
hi derjoh1986, /you think this 160a esc along with the rest of the the spekrum electrics is worth installing. i know they are using a 1250 kv motor, but its the esc im really worried about. thanks for your opinion on this man.
This is great! I’ve been looking for a “recipe” for going 100mph with an ARRMA Limitless! Thanks for assembling all of the components (including motor)!
Can you show a build with the new spektrum smart tech in a Mojave and Infraction.
You started off Sounding like the razor RC
Thanks I guess? ;)
@@SpektrumRCvideos for sure Razor is awesome I actually thought you were him for a sec. Thanks for the reply!
What servo arm is on there? Also what gearing? I just bought my infraction along with the spektrum 8s combo.
A lot of goodies in this video🤔 Great run guys👍👍
Man I was hoping to see the Motor esc install.
Nice! Love the tech.... although it didn't look arrow straight, what % was the AVC on? I run between 20-30%
So how does the Transmitter calculate the speed? It receives RPM data from the car - is there some setting that converts RPM to speed in the controller (as difference gear ratios would affect this calculation)?
It is a built in calculator in the transmitter. It takes the gear ratio, RPM of the motor, and the roll out of the drive train and boom, you got mph/kph
@@SpektrumRCvideos what's your pinion setup
@@SpektrumRCvideos How Do You Get The DX5 Rugged To Show MPH??? I Have The DX5 Rugged & It Came With With The Spektrum SR6200A, How Do You Get It To Show MPH On The DX5 Rugged Transmitter???
Very nice. Doesn't take much to crack 100mph these days and now with this new tech, it's even safer. It's amazing how far this hobby has come. Outstanding work.
Interesting motor choice... 🤔 Why not just use the motor from the Super Rock Rey?
All the products used in this video are in the description.
Because a rey 750kv motor doesn't have the RPM, Its all torque, on the limitless you need both, thats why a 1250kv motor is perfect, for this application, and its weight.
Always get minimal info on these videos. How did the ESC fit in? What Gearing? Motor looks like a different one than first shown. I'm sure no details were given because it was not an EASY install.
Its the 1250kv motor with the 160a esc combo that they sell...In order to fit the esc in you have to cut the tabs off and the motor fits in just like it should and he's prbly just using what the car came with for the gearing. Most of the info is in the desc but he could've shown the stuff going in just by doing a time lapse.
He still hit 100mph with all the arrow on 🤔 gd that’s how you know stuff is working
Telemetry on the remote like that is awesome. The motor, esc and battery drop in cut was great. Good job video team. Let’s play a little game of “I spy” 👽 I spy something new. What is it?
When are we going to talk about that 1250kv 1/6 scale motor? What car could that be for???
@@Daywalker_Lee with a production Arrma heat sink too... hummm...
@@jerryshobbies8224 👽👽👍👽👽Things that make you go hmmm
@@Daywalker_Lee It's coming
Ok, ready to pull the trigger and get one, (wife said yes, so gotta move quick!) :) so, if you built one to corner and accelerate well and top end was not a concern and Spektum was all the goods inside, what we your build be? You put the list up, I will cut, paste and purchase. (Gotta beat neighbor, he is doing another build, so, help me here! :) Parking lot, court stuff, no long straight-aways.
I liked when you said “You never say one more time” LOL that is a bad mojo.
So real
I just bought mine can't wait till weather break . To run mine I have a dx5 older remote. But I'm going to get 1 like u have
What motor are you running
Does this setup log ripple voltage? Wondering if capacitor pack is needed (it usually is).
Very impressive! Looks like the gps Update speed is fairly High 😱👍🏼
Nice video 👍 looks like it's working well sweet setup 😎
Sounds like a jet going by! 😱😱💨💨🚀
Did you use the rechargeable batteries in the tx? How do you recharge them, take them out each time?
Cool idea no need for gps speedometer thanks
My Limitless is waiting on the top secret motor and this kit 💪🏿👍🏿
HEY BRO, LET ME KNOW WHEN THAT tOP SECRET MOTOR IS AVAILABLE TO US MERE MORTALS.
THANKS MAN
What is the length of the 1250kv motor spectrum the same as 1100kv?
does a 1100kv spectrum motor fit on the arrma limitless?
1100kv is quite a bit bigger, and I doubt it would fit with out some sort of modification.
got a ? got a habao vt build im doing usuing all spektrum smart same reciver and esc only 6 cell how can I get specs needed for programing esc for habao 2000kv motor
Spektrum nice run and setup
which pinion and spool gear? thanks
What's the KV on the "unmarked motor"?
Nice I wished you'd mention how to fit the 160A esc in the limitless esc tray. The mounting tabs are in the way. Or did you replace the mounting tray from out of the Infraction or Felony? Otherwise you will have to cut the tabs off.
Chop Chop! ;) Hack the tabs off and use included mounting tape to stick it in the tray. Hope that helps!
What motor was used or vendor is suggested?
I have a quest about my Vendetta. As you know it has a 100amp ESC with the 3660 3900kv. I have been having much trouble with LVC. The car goes into a safe mode or limo mode, even when my 3s batteries are still full. I also have the Spektrum programmer and each cell is exactly balanced. Now I’m just staring to learn about the AVC feature. Can the AVC possibly be causing my car to go into Low Voltage Cutoff? I downloaded the latest updates for the box and Esc. I set the LVC to 3.2v and it still does it. I am merely trying to just drive in a straight line. Speedrun it. I mean it literally has happened everytime I’ve tried driving it. Any tips to lookout for? Please help. I did purchase this car direct from Arrma, maybe the Esc is bad? I don’t know but it is frustrating.
Great video it’s running good out there like the new electronics
A mini 8ight with 3150 brushless motor smart 130 esc dx5 rugged 2000 2s or 2200 2s battery all smart spectrum Will that work
Hello, Just received my limitless today and Spektrum receiver. Any updates on the motor that was used. Noticed a 1/5 scale Losi due to be released soon has a Spektrum motor.
Good morning this setup is that stock gearing and spool?
Yes it is
Nice set up. Can we get a coupon code if we buy everything?
Someone said that there was no GPS on the spectrum system??
When spektrum dx6r update for smart technology ?
Hi there, will the Spektrum motor fit on the stock Arrma motor mount?
Pretty accurate. I like the telemetry..great runs
If you could make some sensor's for nitro that would be great..
Cool video!
Interesting to see what this tech can do.
What gearing did you run? I'm using this same setup.
I'd like to see your choice for an upgrade on Arrma Granite 3S BLX. Thanks
Spektrum 150esc and stock 3220kv motor on 6s rips.. I also did a hw max8 combo in my granite, 38 spool 27t pinion.. runs hard ASF!!
Hi what pinion gear did you instal and did you buy it separately?
Stock gearing that comes with the kit :)
@@SpektrumRCvideos How many teeth pinion and mod?
How do you turn of AVC permanently?
What is kv motor,please?
How do I fit the Firma 160 into my Limitless? This is my first car so please excuse the dumbarse questions.
For our build we took a dremel cut off wheel to the mounting tabs and placed into the esc tray. Used some high quality double sided mounting tape. There are other methods as well but that took the least amount of modification.
omg it sounds like a JET !!! AWWEESSOOOMMMEEEE!!!
Hey I just bought my son this car and the 1250 kg 8sesc combo but it's not mashing up any help
What are you having issues with Specifically?
Can you give me model numbers to everything you got done to that car because I just got one and i want to make it fast👍
How did you get the esc to fit ? Grind the tabs
No response ?
You had to grind tabs off to fit in esc tray?
Mccantsfitness yes just cut them off
Smart electronics is what I need too.
Hey I just recently picked up the limitless and took my entire load out from my infraction and installed in the limitless just to see how it would run. Used the gear that came with the limitless and it’s running like crap. If I punch it, it just makes an awful noise I have to really ease into it. Any suggestions on what the problem might be? Everything worked perfect in my infraction.
Gearing. The limitless has that 36t spool and that is way to much for the box system. It might work better if u have a cap pack but you either need to change that spool out to a center diff or change ur system to something better
To get the firma 160 esc in did you have to cut or remove anything from the esc
I cut off the mounting tabs :)
@@SpektrumRCvideos does this void the guarantee???
And I just bought a Max6 for my Notorious😕. But I run futaba, so not looking to switch
@Eddy Jin haha
Please list all Spektrum products used for reference.
Check the video description bud!
so what was the roll out? I just dropped kraton 8s electronics with smart lipos. trying to set up my dx6r
Roll out setting for producing accurate speed on the DX5 Pro and Limitless
4-pole motor
2.99" Roll Out
@@SpektrumRCvideos How do I set the roll out on the DX6R? It only accepts whole numbers, I tried 2.99" it shows up as 299. There is no(") sign on the numeric keyboard.
How did you get all that to fit? Motor and esc came today. With how you have it set up the motor wiers are not long enough and the esc dose not fit how you have it
Mike Ward the esc I cut the mounts off and double sided it in. Motor takes a bit of adjustment. Had to loosen the diff mount then pushed motor in and re tightened the diff mount
nonsense.
what motor?
what ESC?
this spektrum electrics fit easy!
Correct the motor fits easy just have to work it in . HeAt sheiks will not work. Esc just cut tabs back just enough a screw will still hold . But I cut and just double sided tape. You can’t pull it out with the tape. Point the esc motor leads toward the motor.
Very nice!!!!!!!!!!!!!!!!!
Great run!!Those tires won't last long on 8s! Lol
i have a question about the 150amp smart esc. I want to pair it on my v4 kraton with the stock motor, what telemetry will be available?
depends on your rx bro
I love this guy
Is the limitless esc tray thd same size as the infraction? Will the 160 amp esc be a direct replacement fit???
No we did have to shave the mounting tabs off and mount with double sided tape. Not a big deal and does not void warranty. Thanks!
Awesome, will the 160amp firma be a marketable diff from the 150am blx? Ive got all other spektrum smart tech including the dx5c/sr6100at so I figured it was the "smart" moves..... forgive the pun lmfao im just getting back into the hobby after 8ish years plus im new to electric cars so im trying to learn as much as I can. Is there a noticeable difference between 150amp and 160amp ? Plus I saw two different firma 160 models, one was $199 and the other was $209.99. Whats the difference?
@@jjirish81 on 6S, both of them should perform the same. BUT the 160 can handle 8S :) the 2 different Firma 160 are that one comes with a Capacitor pack which is there to help with voltage feedback when braking, which is good for speed run cars like the Limitless.
@@SpektrumRCvideos so with the 160amp the car will still shut down after 10ish min of running? I was hoping that it would run cooler and more efficient? Can you recommend an esc that will do the job?
@@jjirish81 What sort of temps are you hitting? What motor and gearing?
Very cool stuff. Telemetry is a big part of my rcn experience. Have it in everything I own. Detects problems before they get real expensive. I wanna try this esc, looks very interesting especially with the future motor. Hope these new products hold up. Just a really fun component of the hobby 👍👌
Yup! With this you'll know how hot your esc and batteries are so they don't fail in a blaze of glory! :)
Can I trade in my 1515 2200kv castle motor which got fried today!! Too much overheating 🥵 issues!! I got spektrum esc 160amps spektrum 4s lipos sr6100at receiver dx5 rugged transmitter!!! Just need the motor 1250kv spektrum plz help me!!!!!
I just bout the dx5pro and the hole set up this guy put in their litmitless and I just cant figure it out I can’t put my gps to work my litmitless feels like it won’t brake it takes off to fast my motor and esc trun hot in less the 10 min I’m just about done with this set up can’t get it to deal inn and when I put my Traxxas receiver everything just runs soso smooth need help
hey bro, you get it to run right?
Arrma was good when Durango owned them now the price tags quickly go up for the same product!!
Stick to building custom. Don't give your money to these McRC companies.
That is fast🚙💨💨💨💨
What size fan is on this esc?
i believe it is a 30 x 30mm. it is what comes standard on the Firma 160
SpektrumRC thank you
It shows you mph on the tx?
armenvegas yes
I wanna put one in the Xmaxx no one has done it yet can you upgrade the Xmaxx if so please give me a shout out
Where was your punch level?
5
@@SpektrumRCvideos pinion?
The balance of the car is not very good because the motor weight 732grs and the combo servo, esc, receiver and box 400max...
Losi LST 3xle 😎
Good info. Subbed 👍.
Unmarked motor? Lol we can can see it was a spectrum motor.
Throw some 100c 's in there
No motor KV or size? Just "Unmarked motor".......?
David Fernandez check description. More info coming soon!
Please some more run
Brought this whole setup and the esc will not calibrate, im going to return all this crap, been trying every chance I get for 2 weeks, instructions sound real simple but it just does not work
Hi Mike, If you bought this whole setup then there would be no need to calibrate the esc, it is all precalibrated for Spektrum. What exactly is the issue?
@@SpektrumRCvideos car won't move and steering works fine. Couldn't calibrate esc. Last ditch effort I changed the reciever from the new sr6100at to a reciever that came with my dx4r pro and it works fine. In removing the 6100 I accidentally pulled off the antenna wire ruining the brand new 90 dollar reciever. I thought paring the smart esc, smart reciever, and smart batteries would be easy and give me full telemetry. It just would not work.
@@SpektrumRCvideos if you dident have to calibrate for spektrum it should say so in the manual. I wasted 2 weeks and ruined my brand new reciever in the process.
@@mikew9788 Feel free to mail in the receiver to us. We can get the antenna replaced. Sounds like it was not the esc that needed calibrated but rather the rx. Keep an eye out for our next self help video where we go into more depth on setting up the SR6100AT rx.
@@SpektrumRCvideos I calibrated the rx and it worked fine, full throttle, full brake, full right , full left, it worked and confirmed at every step, still did not work. I would love to get the antenna replaced and try again but something isn't right. Mabey it isn't compatible with my dx4r pro
That's Smart that is guy's ❤️🇬🇧#arcouk
When are you getting an limitless or infraction reuby ?
So after all that it's slower than stock??
A Stock limitless is zero mph :)
Now go run it with a STX2. What, you don't like that cheap radio? Neither does anyone else buying +$500 rc's.
I think any brushless Arrma should have the DX2E Active
Amen!! 👏👏👂
I see your point. But the limitless doesn't come with a transmitter at all.
@@philthyco1
DX2E ?
why?
cheaper?
@@1521joe The dx2e active is 10 times better that the stx2..That's my point.
30C battery's? ?? Yeah good luck with that!
Ken Design They actually worked fine, but for the speed run we did use 2 100c 4S Smart packs
@@SpektrumRCvideos 0:55 you need to edit your video. People are going to be overheating their gear trying to do tall pinion speed runs because they saw your video with 30c packs.
Well one great thing about Smart ESC and batteries is you can monitor the temps and set alarms to keep your equipment in check, with no extra modules needed. Great for speed running because heat is the leading cause of death in speed run models! #themoreyouknow . We will add that the 30c packs honestly did very well and nothing got beyond our temp alarm settings so we are confident they can handle this particular setup.
More like Get unaffordable...
That thing is slow.
Airbrushkid yeah we thought it would be faster too... time for a bigger pinion!!! 😎😎😎
They used stock pinion anyway. Imagine going 100mph out the box that easy..
@@SpektrumRCvideos stock pinion as in 27/34??
On 8s??
Must be low kv motor.
1400/1600 kv??
Great work tho guys.
@@linzitazim yup stock gearing with a 1250kv motor. looking at going upto a 30t.
@@SpektrumRCvideos awesome!! Gonna rip!
Unmarked motor what kind of shit is that?
LOL yeah it was a unrelease motor, it is out now. Same motor found in the Kraton 8S.
Unless the power output of this specktrum ESC is as good as Castle creations 200 amp ESC, you wasting our time. You should compare your ESC against castle's esc to prove your worth.
derjoh1986 this video is about using Smart Technology to get valuable telemetry, easily, without extra wires modules or sensors. We’ll leave the comparison videos up to you guys!
hi derjoh1986, /you think this 160a esc along with the rest of the the spekrum electrics is worth installing.
i know they are using a 1250 kv motor, but its the esc im really
worried about. thanks for your opinion on this man.
34t pinion. 1.1 ratio?