Great video, I just brought myself a light kit and soon I will put my trailer lights together after watching your video, thank you for sharing, so, now I have the courage to fix my trailer myself.
Kylie Hetherington sorry for the late response I appreciate the kind words that's why I built my shop to help others and to do simple instructional videos just trying to keep things simple and down-to-earth thanks so much for watching
@@davidc7889 that's awesome you found the problem. them kits are super easy to install. the only thing most people mess up is getting a good ground on the trailer
Nice video thanks - one thing I just never have confidence in is electrical but these seems like a very straight forward task. Been putting off getting new lights/wiring on the trailer long enough, not anymore.
Ron Steurer electrical systems can be tricky at times but something as trailer wiring it like you said it's very straightforward it's so easy definitely give it a good to gun ho try just don't forget to take the white wire and ground it good to the trailer that's where a lot of people have problems wood lights not functioning because of a bad trailer ground thank you so much for watching
A good hack for running the wires down the tongue. Just run a tape measure down the tube and out the other side then lock it, go to the other and and tape your wires to the end of it, then go back, unlock it and pull the wires back through. Works every time and everyone has a tape measure.
excellent vid bud. very informative. thanks as i'm about to rewire my 20 yr old 5x8 utility trailer that i've been limping along for many yrs replacing this then that.
Do not own a soldering iron/gun. So I use mash-connectors and shrink tubing for these projects. Use what you have and know how to use. Great video. Thanks.
I would add that the ground for the lights is the mounting screw nuts. Make sure the metal is clean and bare and the bracket is between the light and the trailer, not under the nuts that make the ground.
Guys it’s 4:37 am and boyfriend driving me nuts on wiring... I’m a nerd, I do technical stuff... Googled RUclips, you boys came up! Thanks maybe I can relax my mind now!!! Now he gotta make a video... lol thanks
You don't like the wire nuts on account they are not water tight. But a trick I learned years ago while wiring outside stuff with wire nuts is to squirt just a dab of 100% silicone into the nut & then put my wires together twisting them into the nut snug n tight & presto they are now water tight.
It is so easy that I installed a new water proof set of LED’s on my boat trailer today and they worked the first try. LOL 😆 It is my 1st set and I think I may add a set of yellow side lights later this week because I can.
I'm just watching a bunch of videos on rewiring trailers to get the courage to do it myself on my 40 year old horse trailer. The lights don't seem too bad but I'm concerned about the breaks.
Thank for for explaining "HOW" to do the proper connections. When searching for "How to", wiring diagrams shows "where", to run wires, NOT "How". I know its simple but still when yo google "How" you get a bunch of diagrams that show where to "run" the wires but not actually "How" to hook up tail, and plate lights. Showing how to include Running lights would make this complete
azhaynes two wire rims side marker lights you would tap into the wire that feeds the turn signals and the running lights that way when you make a turn the lights will Flash and when you have running lights on it would activate the side marker lights. Hope that helps thanks for watching
Do you know anything about replacing a 7 pole plug?. Im learning how hard it would be compared to replacing all the wiring and just wiring the way you did. Still thinking
Yes which isn't even needed. No brakes on my trailer. So rewiring or.. ! Maybe I can attach a 4 pole.. again: homework time for me. Thanks again for the video
@@ifferl8781 I get it there are adapters that go from what you have down to the standard trailer plug I can't remember the exact name but I know U-Haul sells them Walmart Amazon and a lot of other stores would have them I'm thinking that's what you need
massis32210 Thanks for the response. But I can't figure out what they clip onto. I'm going to use them for my ground but they don't seem to fit any of the other hardware.
Nick Lozowy I didn't explain the inside of the properly, there are two channels inside of it. One runs all the way through, and one just goes half way through. you slip the wire that you want to tap power from in the long grove and the other wire goes in the short slot. in the middle of it is a metal blade like thing that you would squeeze down with a set of pliers and then it would Pierce both wires just insulation enough to send power from one wire to the other one without having to actually physically cut both of them. I have used them in the past but I personally don't like them I've had them cut wires completely in half and if you do use one I would recommend putting the heat shrink on before using it a large enough one that you could heat shrink the whole thing to keep it waterproof
love your video. i tried installing lights per your video. one problem is that i dont have a green wire on passenger side. i have green and red. Does it matter? and does each light have to be grounded? Thanks
Don't forget that the metal bolts on the back of the lights have to make good electrical contact with the metal on the trailer. That completes the electrical connection via a ground. So, if the trailer is rusted at the point where those metal bolts connect to the trailer, you may want to remove the rust first. Also, if the holes that the bolts go through are too big, there may be no electrical connection. That was the case on my trailer, and I ended up fashioning an aluminum bracket with smaller holes to the back of the lights, and then grounded the bracket itself to the trailer by drilling a smaller hole through both the bracket and the trailer and fastening with a third bolt.
Sorry for the late response if it came with two ground wires they should run back to the light and ground down to the post that would secure the light to the trailer but try grounding the trailer out first that might work if you have any questions just respond
LOL I might have been stole the license plate bracket backwards but it's funny because I just remove them later on I never really run tags on any of my trailers
It's really up to the state laws or up to you when I built my 16 ft toy hauler I put two marker lights on each side because of the length I hope that helps thank you so much for watching
Somebody probably already mentioned this, but the only error I saw, was you installed the license plate holder backwards. The clear plastic window on the left tail light is to illuminate your license plate at night. The plate holder, needs to be installed in reverse (to how you did it), so the license plate is under the clear plastic window. Other than that, Good Job.
After making the video I turned around and fix that issue trying to film and stay on try sometimes you get lost and you make me a simple mistakes thank you so much for watching
If a tow vehicle has seperate turn signals, i put the extra lights on to accomodate. I very much dislike using the electronic adaptors because its just another thing to fail. The seperate turn signal system is also a superior design, so why not use it? I also always go for interior trailer connectors. I also keep the trailer end in an enclosed box when not in use. Theres nothing like clean connectors to maintain reliablity.
I agree as far as on the electrical connectors they're honestly nothing but junk made for someone too lazy to find an alternative way of hooking up the wires thanks for watching
Tilt Trailers must be grounded on the bed not the tongue! if you ground on the tongue your going through the hinges and the lights will cut out when you drive, if you ground through the bed where the lights are bolted to, your good.
To be honest at all really depends on the kit that you get most are fairly simple but always refer to the instructions or wiring diagram to get with your kit
So I wire my 10 foot trailer exactly like this. Left blinker and right blinker and stop lights work. Running lights do not work why? How do I troubleshoot it the wire harness is brand new and the lights were ordered from Amazon LED.
I'll be honest when it comes to wiring sometimes I have to be there and see it wiring can be tricky but just in case check the vehicle make sure that you're getting out put out of the plug
The only light that work on my boat trailer is the driver side only. Driver sides of the trailer and the driver side rear light, but my passenger side on the trailer and rear passenger light does not work. I replaced the ground wire on the passenger side which I did not hear you mention about a ground wire and I replaced the rear passenger bulb and it still did not work. Can you please give me some information on this? Thank you and what a great video!
I have a problem with my trailer light I connected them and they turn on but when I put my turning signal on they both blink and when I push the brakes they turn off instead of getting brighter what could be the problem?
marcos garcia I would start by checking the vehicle wiring harness for the lights. if that checks out I would check the wires on the trailer to see if you have any cuts in the wire. is this a new to you trailer? and do you have another trailer to test your truck wiring?
marcos garcia start out by checking the ground on the trailer itself . then I would start out by checking the vehicle wiring it's going to turn out to be one or the 2 but I'm starting to suspect that it could be the vehicle wiring. get another trailer of somebody else's and try it . the last resort that I would recommend is possibly going to a U-Haul dealer and having their mechanics check out the wiring or any significant shop
I know what you mean pretty much the same thing I did when I hooked up my lighting in my house, I would turn on the lights my water faucets came on & when I turned off the faucet's the lights came on & vise verse. L.O.L I'm just kidding! You gotta have some humor.
i installed the exact same lights on my trailer yesterday and there not working,,, i have power at the plug,,, when i poked the wire to ck power at the light it didnt have any,,, but when i poked it and touched the trailer the lights came on,,,, so maybe a ground issue?
I am sure you have figured it out by now, but some of the lights have to ground at the mounting bolts, so you have to clean the metal so the nut or bolt makes a good connection.
You would just tapping into the wire that controls the running lights so when you turn your running lights on at night it would just illuminate the side markers
The wiring harness should be 16 ft if I remember right if you have a trailer longer the 16ft you can buy four strand trailer wiring to extend the wiring harness
The white wire which is ground that comes off the harness normally what I'll do is drill a very tiny hole and use a self-tapping screw with an eyelid on the wire and ground it right straight to the trailer.
I bought the same kit and installed it and all of the lights work turn signals everything but when I press the brakes only the driver side doesn’t turn on, What do you think that could be from
Amelia Roque I have a video titled toy hauler build I ended up building a five foot by 16 foot trailer to tow my four-wheelers it's like a five-part video check it out
There's a separate harness that comes with the kit that you would hook it up to the vehicle but I didn't go into detail on that because there are too many ways to tie in into a vehicle thanks for watching
7:247:297:347:407:458:018:06 I wouldn’t do that in the grass in case I lose a nut or bolt and if I mow the grass and get a flat tire it would be my fault that I was working on putting new trailer taillights on
That's probably a good idea not to do it in the grass but in my situation is about the only spot I had at the moment to do it thank you so much for watching
The yellow lights you'll tap in into the wire that runs the running lights. They give you these little blue push connectors don't use them their garbage. Tapping to the wires that run the running lights shrimp and solder the wires and use a waterproof connection. I've only used them on one of my trailers I was super long. If you have any other questions just hit me up thanks for watching...
He should have cleaned the paint and corrosion off the trailer's tail light mounting plate before putting on the new lights. He'd have a BETTER ground connection.
The hole that the tail lights actually went through it there was no galvanized coating or paint on the inside made a great ground but it was would have been hard to see in the video
Those leaf springs could haul a space shuttle... If you had access to a welder, maybe you could relocate those tail light brackets. I don't know why anyone would build a trailer with lights on the corner like that. It's begging them to be smashed to pieces.
Great video, I just brought myself a light kit and soon I will put my trailer lights together after watching your video, thank you for sharing, so, now I have the courage to fix my trailer myself.
I love how thorough he is I’m not the best when it comes to wiring but he made every step very clear and how to do things easily.
thank you so much for watching I appreciate it
I am a single lady and just discovered I need.my trailer rewired. I am ok at diy but this was beyond me until I watched your video. Thank you 😊
Kylie Hetherington sorry for the late response I appreciate the kind words that's why I built my shop to help others and to do simple instructional videos just trying to keep things simple and down-to-earth thanks so much for watching
@@massis32210 you are right it was the vehicle that had wire problem.
@@davidc7889 that's awesome you found the problem. them kits are super easy to install. the only thing most people mess up is getting a good ground on the trailer
Couldn’t have been said any better or made simpler. Thank you sir.
Nice video thanks - one thing I just never have confidence in is electrical but these seems like a very straight forward task. Been putting off getting new lights/wiring on the trailer long enough, not anymore.
Ron Steurer electrical systems can be tricky at times but something as trailer wiring it like you said it's very straightforward it's so easy definitely give it a good to gun ho try just don't forget to take the white wire and ground it good to the trailer that's where a lot of people have problems wood lights not functioning because of a bad trailer ground thank you so much for watching
Very well done, commentary, camera work, and detail level. Thank you for work on the video.
Gary Duncan thanks for watching.
Great video. Easy peasy, anxiety level low now that I watched your video and set to hook my boat trailer up! Thanks!
CarissaTim Hoyt thanks for watching. glad to help.
A good hack for running the wires down the tongue. Just run a tape measure down the tube and out the other side then lock it, go to the other and and tape your wires to the end of it, then go back, unlock it and pull the wires back through. Works every time and everyone has a tape measure.
Thank you for that tip.. I appreciate it.
excellent vid bud. very informative. thanks as i'm about to rewire my 20 yr old 5x8 utility trailer that i've been limping along for many yrs replacing this then that.
Glad I could be a help I appreciate you watching my videos
Do not own a soldering iron/gun. So I use mash-connectors and shrink tubing for these projects. Use what you have and know how to use. Great video. Thanks.
I have a soldering gun and iron but you're right use what you got make it easy install but also keep it weather-tight thank you so much for watching
Thank you! Very easy and simple how too directions.
Same
You did great man. I'm gonna buy a trailer and wire it myself. Thanks for carefully explaining the steps to follow.
Thank you so much for watching I appreciate it
Great job. bought old boat and trailer, this will help the road worthiness of the trailer.
Thanks for watching.
Thanks again. I got it figured out. Your video made it easy
Thank you. Restoring my late fathers 14 ft jon boat trailer..Thankfully the boat still in perfect condition and is older. The trailer not so much lol
Bass Tactic I'm glad to help thank you so much for watching
Simple and very effective well done job! Thanks
Thank you so much for watching I appreciate it
I would add that the ground for the lights is the mounting screw nuts. Make sure the metal is clean and bare and the bracket is between the light and the trailer, not under the nuts that make the ground.
Thank you for so much for sharing that
Goob job on the video. Quick and very straight forward.
Thank you so much for watching
Guys it’s 4:37 am and boyfriend driving me nuts on wiring... I’m a nerd, I do technical stuff... Googled RUclips, you boys came up! Thanks maybe I can relax my mind now!!! Now he gotta make a video... lol thanks
Lol thanks for watching
Very clear and easy to understand. Great job fellow.
jr jim thank you for the kind words. thanks for watching
Thank you so much gave me a hassle free job and no stress
Kx Boy19 im glad i could be a help. Thanks for watching...
I'm a 70 year old woman and after watching this video i'm sure I can install trailer lights and make my rig legal. (No more back roads)
good luck linda!
Hey man, thanks for the video! I was gonna pay a guy to do this for me and watched your video, and I THINk I can do it my self... lol.
I'm glad I could help thank you for so much for watching
You don't like the wire nuts on account they are not water tight. But a trick I learned years ago while wiring outside stuff with wire nuts is to squirt just a dab of 100% silicone into the nut & then put my wires together twisting them into the nut snug n tight & presto they are now water tight.
Dave Overbey that is a great idea, I will try that. Thank you for sharing your idea. thanks for watching.
Dave Overbey yup, they sell really expensive water proof wire nuts & that's all they are:) great advice
yeah, if your a jack leg mechanic lol. shrink wrap is full proof and looks professional too
coat it with liquid electrical tape that stuff completely seals when its dry
Dave Overbey you may also use a bit of petroleum jelly (Vasoline) and it stays put pretty well.
It is so easy that I installed a new water proof set of LED’s on my boat trailer today and they worked the first try. LOL 😆 It is my 1st set and I think I may add a set of yellow side lights later this week because I can.
I would definitely add the marker lights with my 16-foot trailer having two on each side is a big help at night thanks for watching
Very helpful, thanks!
TheSignSeeker thanks for watching. I have a 2nd channel Massis-outdoors check it out.
I'm just watching a bunch of videos on rewiring trailers to get the courage to do it myself on my 40 year old horse trailer. The lights don't seem too bad but I'm concerned about the breaks.
Thanks for taking the time to share!
Thank you for watching my video.
Thank for for explaining "HOW" to do the proper connections. When searching for "How to", wiring diagrams shows "where", to run wires, NOT "How". I know its simple but still when yo google "How" you get a bunch of diagrams that show where to "run" the wires but not actually "How" to hook up tail, and plate lights. Showing how to include Running lights would make this complete
Thank you for taking the time to watch the video some people comment that I talk too much but I'd rather explain what I'm doing then just showing
Great vid
douglas frye thank you for the kind words. thanks for watching.
Thanks for the step by step.
Thank you so much for watching
Thanks for taking the time helps me
Helmer and Rawlins thanks for watching.
Made it simple for me thanks for the help👍
I had a question about what you did with the side marker lights? How do they wire up?
azhaynes two wire rims side marker lights you would tap into the wire that feeds the turn signals and the running lights that way when you make a turn the lights will Flash and when you have running lights on it would activate the side marker lights. Hope that helps thanks for watching
Thank you Sir this was BIG TIME HELP!!! 😎👊
Thank you for watching my video I appreciate it
Good video. Thanx!!!!
Aldo Catsaros thanks for watching.
Very nice very good trick
thanks man i am about to rewire mine trailer too...
mikal vanger glad to be a help. Thanks for watching.
Great Help...Thanks
Greg Smith glad I could help. thanks for watching.
Hey a trick I was always told hear in the us is the brown and yellow is on your yellow passing line and the green is on the pass side like the grass
thank you!
Great video !!
Angela MacDonald thanks for watching.
I could here some guy yell “ MOM! .... THE MEAT LOAF.... FUCK!!!!”
Might be a neighbor or mine
mark r thx great vid lol
Running lights that’s the whole reason I watch this video
.......PM bbn m.pi the jal
Great video thanks
Thanks!
this video never show you connecting the driver side wires ???
Very well done explaining how to do that 🙂
I appreciate it thank you so much for watching.
Thanks for the video, makes me think even I can do it, lol!
MPHans1214 its not hard at all. hope I could help you. thanks for watching.
You're a great explainer. This helped. Thanks
Thank you so much for watching I appreciate it
Do you know anything about replacing a 7 pole plug?. Im learning how hard it would be compared to replacing all the wiring and just wiring the way you did. Still thinking
@@ifferl8781 unfortunately I've never done one I think you're talking about the one that has to do with a brake controller Maybe
Yes which isn't even needed. No brakes on my trailer. So rewiring or.. ! Maybe I can attach a 4 pole.. again: homework time for me. Thanks again for the video
@@ifferl8781 I get it there are adapters that go from what you have down to the standard trailer plug I can't remember the exact name but I know U-Haul sells them Walmart Amazon and a lot of other stores would have them I'm thinking that's what you need
Very helpful 👍👍👍
Thanks very helpful
Thank you for taking time to watch my video
Stick a fishing pol thru....tie it. Pull it
That's a good idea, thanks for watching...
Thank you!
Thank you so much for watching
THANK U FOR THAT
Thanks for watching...
great video
Thanks for watching
Thanks. Good video
Shirley Dunnells thanks for watching.
Good vid. You cut to the chase.
You installed the same brand I bought. What are those blue clips for?
Nick Lozowy the clips are a way to tap into a wire with having to cut it. Thanks for watching.
massis32210
Thanks for the response. But I can't figure out what they clip onto. I'm going to use them for my ground but they don't seem to fit any of the other hardware.
Nick Lozowy I didn't explain the inside of the properly, there are two channels inside of it. One runs all the way through, and one just goes half way through. you slip the wire that you want to tap power from in the long grove and the other wire goes in the short slot. in the middle of it is a metal blade like thing that you would squeeze down with a set of pliers and then it would Pierce both wires just insulation enough to send power from one wire to the other one without having to actually physically cut both of them. I have used them in the past but I personally don't like them I've had them cut wires completely in half and if you do use one I would recommend putting the heat shrink on before using it a large enough one that you could heat shrink the whole thing to keep it waterproof
@@massis32210 excellent description thanks!!
love your video. i tried installing lights per your video. one problem is that i dont have a green wire on passenger side. i have green and red. Does it matter? and does each light have to be grounded?
Thanks
thanks for watching...
Don't forget that the metal bolts on the back of the lights have to make good electrical contact with the metal on the trailer. That completes the electrical connection via a ground. So, if the trailer is rusted at the point where those metal bolts connect to the trailer, you may want to remove the rust first. Also, if the holes that the bolts go through are too big, there may be no electrical connection. That was the case on my trailer, and I ended up fashioning an aluminum bracket with smaller holes to the back of the lights, and then grounded the bracket itself to the trailer by drilling a smaller hole through both the bracket and the trailer and fastening with a third bolt.
OldTimer your right about rust on the trailer frame. With the larger hole in the frame I have learned to compensate for that. Thanks for watching.
Good stuff! Thanks to you I figured out why mine weren't working 😁👍
lol,,, im pretty sure you just helped me fix my problem,, thanks! i have the nutz on there but there not tight to the trailer yet,,,
just use your millimeter and check for conductivity
Does that also cause the turn signals not to work if there not on good??
The clear on the bottom of the left side of trailer light is for license plate illumination.
Your right about that. I dont run to many of my trailer with tags.
Thanks. I couldn't make any sense of the directions that came with the kit.
I'm glad I could help thank you so much for watching
My kit came with a ground wire on each side. Not sure where to connect those
Sorry for the late response if it came with two ground wires they should run back to the light and ground down to the post that would secure the light to the trailer but try grounding the trailer out first that might work if you have any questions just respond
watches you install license plate bracket backwards and remembers the billion times i did that then cursed
LOL I might have been stole the license plate bracket backwards but it's funny because I just remove them later on I never really run tags on any of my trailers
What about back up lights? Do you need them for a trailer?
trailer typically don't have backup lights far as I know they're really not required at all thanks for watching
massis32210 awesome ty :)
@@high_fructose_corn_syrup any time
Any advice for the marker lights?
It's really up to the state laws or up to you when I built my 16 ft toy hauler I put two marker lights on each side because of the length I hope that helps thank you so much for watching
Somebody probably already mentioned this, but the only error I saw, was you installed the license plate holder backwards. The clear plastic window on the left tail light is to illuminate your license plate at night. The plate holder, needs to be installed in reverse (to how you did it), so the license plate is under the clear plastic window. Other than that, Good Job.
After making the video I turned around and fix that issue trying to film and stay on try sometimes you get lost and you make me a simple mistakes thank you so much for watching
If a tow vehicle has seperate turn signals, i put the extra lights on to accomodate. I very much dislike using the electronic adaptors because its just another thing to fail. The seperate turn signal system is also a superior design, so why not use it?
I also always go for interior trailer connectors. I also keep the trailer end in an enclosed box when not in use. Theres nothing like clean connectors to maintain reliablity.
I agree as far as on the electrical connectors they're honestly nothing but junk made for someone too lazy to find an alternative way of hooking up the wires thanks for watching
Thanks brother
human being anytime hopefully I've been a help
Tilt Trailers must be grounded on the bed not the tongue! if you ground on the tongue your going through the hinges and the lights will cut out when you drive, if you ground through the bed where the lights are bolted to, your good.
I was woundering if u could use the yellow and green for the driver side and put the taillights on just the one wire
To be honest at all really depends on the kit that you get most are fairly simple but always refer to the instructions or wiring diagram to get with your kit
massis32210 I gotcha bud and thanks for your opinion
I'd pay $4.00 just to stay out of Wal Mart.
I feel you I'd pay 20 just not to see a Walmart LOL
So I wire my 10 foot trailer exactly like this. Left blinker and right blinker and stop lights work. Running lights do not work why?
How do I troubleshoot it the wire harness is brand new and the lights were ordered from Amazon LED.
I'll be honest when it comes to wiring sometimes I have to be there and see it wiring can be tricky but just in case check the vehicle make sure that you're getting out put out of the plug
I have one brown wire. How do I make one brown wire go to the left and the right?
Sorry I'm late on the comment I've took just an extra wire and lengthened it and made a connect on to the other side thanks for watching
The only light that work on my boat trailer is the driver side only. Driver sides of the trailer and the driver side rear light, but my passenger side on the trailer and rear passenger light does not work. I replaced the ground wire on the passenger side which I did not hear you mention about a ground wire and I replaced the rear passenger bulb and it still did not work. Can you please give me some information on this? Thank you and what a great video!
I have a problem with my trailer light I connected them and they turn on but when I put my turning signal on they both blink and when I push the brakes they turn off instead of getting brighter what could be the problem?
marcos garcia I would start by checking the vehicle wiring harness for the lights. if that checks out I would check the wires on the trailer to see if you have any cuts in the wire. is this a new to you trailer? and do you have another trailer to test your truck wiring?
marcos garcia thanks for watching.
I've always had this problem and I thought it was the wires so I bought a new kit and it dose the same this
marcos garcia start out by checking the ground on the trailer itself . then I would start out by checking the vehicle wiring it's going to turn out to be one or the 2 but I'm starting to suspect that it could be the vehicle wiring. get another trailer of somebody else's and try it . the last resort that I would recommend is possibly going to a U-Haul dealer and having their mechanics check out the wiring or any significant shop
I know what you mean pretty much the same thing I did when I hooked up my lighting in my house, I would turn on the lights my water faucets came on & when I turned off the faucet's the lights came on & vise verse. L.O.L I'm just kidding! You gotta have some humor.
Thanks man
Thanks for watching....
Pretty good but video needed to do everything on camera including a demo of the finished product as proof positive. Best regards :)
Ralph Folden thanks for watching.
Can't believe you used that plastic tag holder that's crazy man
I installed it just for the video then off camera ended up throwing it away I really never put tags on any of my trailers thanks for watching
loved it thank you so much, I bought a light kit where they are magnetic and it is so nice,
uh Zdox thank you for the kind words. Thanks for watching.
i installed the exact same lights on my trailer yesterday and there not working,,, i have power at the plug,,, when i poked the wire to ck power at the light it didnt have any,,, but when i poked it and touched the trailer the lights came on,,,, so maybe a ground issue?
I am sure you have figured it out by now, but some of the lights have to ground at the mounting bolts, so you have to clean the metal so the nut or bolt makes a good connection.
How did you connect your side lights?
You would just tapping into the wire that controls the running lights so when you turn your running lights on at night it would just illuminate the side markers
✌️
Wiring, on my cycle, sure does take a beating from the road. Wonder, how does it fare on a trailer.
Amelia Roque as long as the wiring is clipped up and tight to the frame and you leave enough slack at the tongue it should fair just fine
What's the lenght of the wire on those lights?
The wiring harness should be 16 ft if I remember right if you have a trailer longer the 16ft you can buy four strand trailer wiring to extend the wiring harness
got that kit at mills fleet farm for $16.99
Matthew Mohs cool I'll have to check it out. I've seen this kit from 14.99 to 25.99. Thanks for watching..
Put the Tag plate up to or you will lose it when you hit a low space as soon as the exles find it SNAP"
TRAVIS GILBERT that's a great idea, thanks for watching....
Where did you put the ground?
The white wire which is ground that comes off the harness normally what I'll do is drill a very tiny hole and use a self-tapping screw with an eyelid on the wire and ground it right straight to the trailer.
Crissizum? NICE
Thanks for watching
I was just playing. And no problem. THANX for responding
I bought the same kit and installed it and all of the lights work turn signals everything but when I press the brakes only the driver side doesn’t turn on, What do you think that could be from
Check the bulbs. Thank for watching
$107 for ? Plus 30 lite kit + 20 gas = 157 :\
PS you gonna show us how to put some kind of bed on this now :)
Amelia Roque I have a video titled toy hauler build I ended up building a five foot by 16 foot trailer to tow my four-wheelers it's like a five-part video check it out
Mate, how you plug that in your car?
There's a separate harness that comes with the kit that you would hook it up to the vehicle but I didn't go into detail on that because there are too many ways to tie in into a vehicle thanks for watching
7:24 7:29 7:34 7:40 7:45 8:01 8:06 I wouldn’t do that in the grass in case I lose a nut or bolt and if I mow the grass and get a flat tire it would be my fault that I was working on putting new trailer taillights on
That's probably a good idea not to do it in the grass but in my situation is about the only spot I had at the moment to do it thank you so much for watching
what about the side yellow lights????
The yellow lights you'll tap in into the wire that runs the running lights. They give you these little blue push connectors don't use them their garbage. Tapping to the wires that run the running lights shrimp and solder the wires and use a waterproof connection. I've only used them on one of my trailers I was super long. If you have any other questions just hit me up thanks for watching...
He should have cleaned the paint and corrosion off the trailer's tail light mounting plate before putting on the new lights. He'd have a BETTER ground connection.
The hole that the tail lights actually went through it there was no galvanized coating or paint on the inside made a great ground but it was would have been hard to see in the video
You missed the side marker lights
On the trailer this short I personally don't use the side markers but my big toy hauler build I did two side markers per side thanks for watching
Those leaf springs could haul a space shuttle...
If you had access to a welder, maybe you could relocate those tail light brackets.
I don't know why anyone would build a trailer with lights on the corner like that.
It's begging them to be smashed to pieces.
With the tail lights at all depends if they're going to be way too low or sometimes you just want to abide by the law thanks for watching
Bracketry fancy talk
Vortec67 lol, thanks for watching.
I was JK good video bud
I purchased this so just brushing up for installing its been a while
Vortec67 oh i understand, wiring can get complicated but you're right brushing up on something is the best way to go
side lights??
I did my side lights on my toy hauler but I didn't do them on this particular trailer cuz it was just too short to have them
@@massis32210 Ah I see, thanks