Aluminum oil Filter Housing upgrade for b58 gen 1! 🫣
HTML-код
- Опубликовано: 1 окт 2024
- Hey guys I upgraded my oil filter housing from plastic to aluminum. Along with new coolant hoses and more!this is not a how to video so don’t watch this trying to step by step how to do it. I recommend going to Kern14 RUclips video, same process!
Oil filter housing from aliexpress
Aluminum coolant connector is from eBay
Hoses are OEM from bmw
Follow my brother and I
IG: @gelo.b58 and @aj_b58
#b58 #singleturbo #340i #bigsingle #garretturbo #oilfilterhousing #aluminum #aluminumoulfilterhousing
im pissed whats the point of inline 6 when it takes 10hrs ish to do this job
Change the gasket to aluminum too
Man are you in the sacramento area? I swear I saw a purple bmw with a pulsar turbo sticker on it 😅
How’s it holding so far?
Gasgets will still fail, not the housing
Indeed, but who knows if I will even own this car by the time it comes, prolly not for another 80-100k miles
Its possible the gaskets are failing prematurely because the housing can flex.
@@tirdkat6104bingo
The housing is what fails. The plastic comes apart, and the gasket pops out the gaskets are not what fails.
The plastic always cracks. Every video I've watched the plastic was cracked. My plastic was cracked and broken apart.
Trash ass design smh and I know the tool is expensive but I already did a water pump on my b58 and the air operated vacuum fill tool makes any coolant job so much easier I bought one from MAC finally
Which manifold is that ?
killed it ! Clean 340 ^^
It’s really simple….but a lot of work 😂😂😂
Same with n55 oil filter housing. Simple as can be, just a lot of work, nothing complicated about it.
@@no-uh535it gets complicated when you got some stubborn hoses that won’t come off 😅
Where did u get the ambient lighting my boy needs this
How much was the ambient lighting
Bro please tell me asap how you got that bottom bolt off the flange you replaced without removing the heat management module to the left of it. I have a 540i and tried a 1/4 extension with and without a swivel and still can’t get to it.
I had to remove it :(
@@ChasingGelo I was able to get it off without removing it 😅 it worked with the 1/4 extension. the socket wouldn’t fit completely on there at first but with enough pressure and turning an angle it finally came off. Putting it back on was tricky but still got it done! If anyone tries this just make sure you don’t drop that bottom bolt and I’d recommend when installing it don’t use the same bolt that was at the bottom because you may round it off a little bit
Oil housing job was so horrible when I did it lmao shits a pain
I agree lol
How about you post the links lmfao. Ridiculous
He using aliexpress and Chinese part my boy, you don’t want them..
Where did you buy the aluminum coolant flange connector I can’t find it anywhere
Add quad exhausts and quad tips