Yes, Declan does know his stuff about SCAG. My SON does too, He was Quality Manager for Scag's Beaver Dam plant for a year or two. He told me If Scag is guilty of anything it's over-engineering things and over-building them. I bought a Cub Cadet LZ54 TANK ON April 21, 2016 and it's been 100% reliable. It gets an oil change and new oil filter before the first mow every spring. Never had a belt break, do have a slow leak in the right rear drive tire, typical tubeless tire problem. It went flat the first time on April 22, 2016, day after I had it delivered. I do like my Cub Cadet's twin 7-1/2 gallon gas tanks, 15 gallons should mow 15 to 20 hours, my yard isn't that big. I must admit Scag makes some interesting equipment. Son brought the prototype yard sprayer and broadcast fertilizer spreaders out to my 2+ acre yard one Saturday morning. I loved the foam marker system! I'VE built a couple sprayers for my yards, a 15 gallon and a 60 gallon. Made my own lawn aerator too, punched TENS of Thousands of 1/2" diameter by 4" deep holes about 4-5 inches from 4 -5 other holes. I had a lawn service aerate my in town lawn years ago, used a plug aerator, my yard looked like a pack of 1000's of run-away dogs ran thru my yard. I started gathering steel that very night to build my aerator, I can pull it over a place in my yard 3-4 times and you can barely tell. If my yard is a little damp I will still be able to find punched holes the following spring after the ground thaws. I kinda patterned my areator after a GLENCO SOIL-SAVER, a fall tillage implement to loosen the soil and let moisture get into the subsoil. I ran a Deere 8440 4x4 with duals about 3-4 mph pulling a 20 ft wide Soil-Saver, and on hills the tractor would spin-out. I never had that problem with my Cub Cadet and my aerator. Anyhow, Skag makes great equipment. It might cost more than other brands but it's worth it.
My Dad did that with me watch out though Declan will know more about the product that Dad does like l did 👍👍👍God bless you for getting our young people involved in the family business like my Dad did 🙏🙏 and his Dad my Grandfather
Declan is a great addition to the family business! So knowledgeable. I know the information you guys have would sure help me to decide. I have 3/4 bumpy hilly acre. Thanks
nice video very knowledgable son you have there. I just ordered a Turf Tiger 2 which wont be available til June in my area but seems like it is worth the wait Also getting a Freedom too!
Yes, Declan does know his stuff about SCAG. My SON does too, He was Quality Manager for Scag's Beaver Dam plant for a year or two. He told me If Scag is guilty of anything it's over-engineering things and over-building them. I bought a Cub Cadet LZ54 TANK ON April 21, 2016 and it's been 100% reliable. It gets an oil change and new oil filter before the first mow every spring. Never had a belt break, do have a slow leak in the right rear drive tire, typical tubeless tire problem. It went flat the first time on April 22, 2016, day after I had it delivered. I do like my Cub Cadet's twin 7-1/2 gallon gas tanks, 15 gallons should mow 15 to 20 hours, my yard isn't that big.
I must admit Scag makes some interesting equipment. Son brought the prototype yard sprayer and broadcast fertilizer spreaders out to my 2+ acre yard one Saturday morning. I loved the foam marker system! I'VE built a couple sprayers for my yards, a 15 gallon and a 60 gallon. Made my own lawn aerator too, punched TENS of Thousands of 1/2" diameter by 4" deep holes about 4-5 inches from 4 -5 other holes. I had a lawn service aerate my in town lawn years ago, used a plug aerator, my yard looked like a pack of 1000's of run-away dogs ran thru my yard. I started gathering steel that very night to build my aerator, I can pull it over a place in my yard 3-4 times and you can barely tell. If my yard is a little damp I will still be able to find punched holes the following spring after the ground thaws. I kinda patterned my areator after a GLENCO SOIL-SAVER, a fall tillage implement to loosen the soil and let moisture get into the subsoil. I ran a Deere 8440 4x4 with duals about 3-4 mph pulling a 20 ft wide Soil-Saver, and on hills the tractor would spin-out. I never had that problem with my Cub Cadet and my aerator.
Anyhow, Skag makes great equipment. It might cost more than other brands but it's worth it.
Great video. I think it's fantastic that you had your son helping you.
Declan is was so nice of you to bring your Dad along on the video. Dads need to feel included sometimes. Seriously, outstanding video.
This kid will grow up to be the best lawn cutter this world has ever seen!👍🏻💪🏻
My Dad did that with me watch out though Declan will know more about the product that Dad does like l did 👍👍👍God bless you for getting our young people involved in the family business like my Dad did 🙏🙏 and his Dad my Grandfather
That kid is sharp. Dope video !! Made me want to watch the entire video after I saw the model I wanted.
In the market for a new scag and this will definitely help me make a decision thank you both. Kid knows his stuff and would make a great salesman.
I like the video your son is a born salesmen. Keep up the good work.
I'm in the market to buy a Scag. If you guys were in my area I would definitely give you the business. Great video guys.
Declan is a great addition to the family business! So knowledgeable. I know the information you guys have would sure help me to decide. I have 3/4 bumpy hilly acre. Thanks
nice video very knowledgable son you have there. I just ordered a Turf Tiger 2 which wont be available til June in my area but seems like it is worth the wait Also getting a Freedom too!
Future salesman in the making?! I know who I'm coming to with all the questions. Thank you for your business! #SimplyTheBest
Very smart young man! Great video.
Great video. You should make your son the sales manager!
Just bought a Liberty Z 48, awesome machine!
Great job guys !!
Good tip about the seat belt 🤠
Love my Scag 💪
Still torn between the Patriot 52” and a Tiger Cat II 52”
"Great review -great helper." -Tom
Hi Declan it’s Ethan Kisker I subscribed and gave it a like
Thanks for watching Ethan!
Hi Declan it’s Ethan I seen that you posted another video I watched it you should make more
Declan why is your dad selling the Scag shop
My lawn service mows my hills, up and down and sideways on a scag vride. If I purchased a liberty z, do you think I would have any issues?
Looks like they went out of business. Facebook says they closed shop.
How much does liberty z with 61" cost?
This kid will is the best
Good job little fellow.
have you ever replaced a HG 5400?
Any idea if the liberty 36 has a side catcher available instead of the bagger?
You can probably find one that will fit. Try the Accelerator bagger or Ballard to see what they offer.
love this kid
Turf tiger all day… no transaxles for me.
and my 50in chopper does 16
🥱