Holy 2005 throwback at the end!! Remember back when I .28 swapped my earthquake? This is the same issue I was having a dragging clutch. It ended up being the shoe springs. Know I know you have this diagnosed already but that is my experience. CAN YOU SMELELEEELELELLLLE WHAT THE NITROGANG IS COOKING
hey bro!! yes, I remember your .28 swap!! the good old days right! lol. With this KYOSHO it's beyond complicated and the thing uses the 1990s style clutch roller needle bearings. So I'm thinking that is the issue. The clutch springs are brand new in this thing, I dont know if that is it. Maybe I should try another clutch set, worst case scenario.. Anyways, 2005 4 life bro!! you know it!>
Love the truck man. Thanx for the this great videos. Your short videos are the best. I don't have the time to watch your live long videos so I missed out on a lot.
whats up bro! Yes, I am dedicating more time and effort to the high quality shorter videos, you're right! The live streams are mostly for the hardcore NitroGang audience. DOnt worry, I have not forgot about the shorter vids and making NItroGreat again, QUICK, lol!! I'll be doing more work on this soon.
hey bro! Thanks for checking this video out man! I'll be doing some repairs on this soon, I've ordered and already have the updated modern bearings for the clutch bell. Hopefully that will fix this SICKENING Kyosho, lol.
hey bro! How you doing! Thanks for checking this video out man! I'll be doing some repairs on this soon, I've ordered and already have the updated modern bearings for the clutch bell. Hopefully that will fix this SICKENING Kyosho, lol.
Anyway, try some automatic transmission fluid on those needle roller bearings in the clutch. But really another issue will just occur anyway. I'm going to a custom 2 speed setup. Just waiting on parts.
YES! that's what we need! A normal 2-speed setup on these would be great!! If possible a basic slayer or t-maxx trans would be great! I'll be digging into the clutch system again on this truck soon bro! Don't worry, all the nitros will eventually run on this channel!>
Hey bro!! I'm glad to know you remember the long history this truck has been though on my channel. So you know what I started with, it was basically missing the entire drivetrain, the linkages and the electronics. Took me a while to source all the parts, and it's still pissing me off!! anyways ive since gotten the modern bearings for the clutch bell, so we will continue on that path.
That is such a cool nitro. To bad about the clutch. Nice job rebuilding it. That 3 gear bell looks awesome but Holy cow is there going to be a bit of cantilever adverse effects on that bad boy, or it might just be hard on bearings by design. You'll get it sorted keep at it. Still this rig is designed better than my 1st generation gmc canyon. Only vehical I know of where you need to drop the, frt axle, transmission and oil pan to replace a timing chain. Classic case of nobody talking to each other in the engineering group....
hey bro! How you doing! Thanks for checking this video out man! I'll be doing some repairs on this soon, I've ordered and already have the updated modern bearings for the clutch bell. Hopefully that will fix this SICKENING Kyosho, lol.
Love that car... although at speed 4 wheel steering can be sketchy lol. The more speeds, the better. Unless like me you run an absolute monster of a race buggy. (Be careful running the fuel line over the exhaust and touching the engine block - I have had bad experiences of the fuel boiling in the line) 350z's rule!! Not only do you have good taste in rc's but also good taste in full-size cars!
hey bro! YEs! You know we both got the best taste in RC and cars, lol!! BTW I used to sell the NISSAN brand of cars in dealerships long ago. Was a sickening job! Sold a few 370Zs at the time and 2 GTRs. I must say I loved the 370Z it was such a head tuner at the time, and still is. Anyways more on this soon!! NitroGang!!.
hey bro! Good question. I'm quite sure I've eliminated the MESH issue because 100% for sure the engine did not move during this test start and the mesh was find before I started the motor, right.. I'm thinking the roller bearings on the clutch bell are curing this somehow when some torque is applied to them. Anyways I've gotten modern bearings and will be replacing the needle bearings soon! More on this later bro! Thanks for watching and your suggestion.
Soo close man! Hard to tell through the video what exactly is going on but it seems to me like the bell is rubbing on the flywheel when the bearings moves around. Maybe try using a small walsher or spacer to keep the clutch bell from contacting the flywheel (if that's what's happening). Great video brorher!
Hey bro! I know, it's tough to really see and understand the situation. I am investigating it more as we speak and already ordered the modern bearings for the clutch bell instead of the stock Roller Style Needle bearings that Kyosho uses. I check the owners manual and I'm 100% sure the assembly is correct including all the right the right shims. So the next point of attack will be the bearings. The flywheel has normal clearance, so still a mystery.
YUP bro! I know! Always a situation when it comes to Kyosho! I try to present the REALITY of what I'm doing, you know. Sometimes this is what happens,. I guess not as eventful as the LAME Electric channels which always seem to be fine, cause their only goal is to sell you them! Sickening!>
I truly don’t understand how kyosho can put a truck out with this many obvious issues. And the crazy thing is that they are all easy to find because they all happen not long after break in
hey bro! you got a point right there! Although this particular truck has had a long history and the engine is from a a different truck. SO there is a long story of issues here, an do'm just trying to make it great again! Anyways, more on this soon! Cant kill a nitro!>
What's up nitro gang. 3 speed problems gotta love them. great looking truck though. mosh pit of doom sickening. keep up the great work Dimitri. NWO for life.
hey dude! I'm glad to see you're catching up on some of my recent vids! I'm always trying to make nitros great again! even if this Kyosho tries to piss me off, I will not let it die! Truly sickening mosh pit right!! I used to that sort of stuff years ago, not I only have one mission!! To make nitro Great Again!.
Hi there big D, how’s it going dude, that’s what you call an rc, Three speed baby 🍼🍼🍼, hells yeah man 👨 Great video man, hopefully you can git er sorted soon, can’t wait to see it lit 🔥. 😎👍👍👍🇬🇧🍼🍼🍼🔥🔥
hey brother! How you doing! Major 3-speed BABY, it's not running well yet, but dont worry the NItroGang is on it!! I've since ordered new standard bearings for the clutch and I'll be putting it on soon, that will be the final test for this PISSENING Kyosho, lol!! NitroGAng!.
hey buddy! how you doing! I referenced the manual and the screw goes directly into the clutch bell shaft itself. There is nothing else there. Unless the KYOSHO manual is wrong, I'm a dead end right now. But I have a plan in the works, and I'm 95% sure it will fix all my problems.. Stay tuned my dude.
I would imagine that running an engine with a missing clutch shoe out of 3 would put a lot of unneeded pressure on the engine bearings because our weight distribution on the flywheel is now off. Its just a bad Idea all the way around. Don't have spare shoes/springs in your inventory?
Hybird i am super excited for my new rc i am getting for christmas i noticed in your videos i dont see your girlfriend anymore i hope you and her are getting along still
hey my dude! Whats going on! Happy to see you here! I see you've been making some great RC choices lately, lets hope none of them piss you off like this SICKENING Kyosho, lol!! more on this truck soon, I'll be replacing the clutch bearings.
lol, hey bro! NO reason, just a little variety in the video world, you know. Since I'm to trying o run boring lame crawlers I figured why not put in something a little different for a change into a video. And broaden our horizons, lol!! Not for everybody, but why not, right.
hey bro! I will admit it's highly temperamental. But you know that it's also one of the main selling point of this chassis, so that's the problem. It's also a very CLOSE-RATIO 3-speed. I fact many single speed nitros are faster than this thing. But it's about the chain drive and 3-speed BABY! lol.
hey bro! For sure! You know I'm always glad to help man! This is what the NtiroGang does! We make other people's Rc adventures good the best we can! Thanks for watching bro!!.
Holy 2005 throwback at the end!! Remember back when I .28 swapped my earthquake? This is the same issue I was having a dragging clutch. It ended up being the shoe springs. Know I know you have this diagnosed already but that is my experience. CAN YOU SMELELEEELELELLLLE WHAT THE NITROGANG IS COOKING
hey bro!! yes, I remember your .28 swap!! the good old days right! lol. With this KYOSHO it's beyond complicated and the thing uses the 1990s style clutch roller needle bearings. So I'm thinking that is the issue. The clutch springs are brand new in this thing, I dont know if that is it. Maybe I should try another clutch set, worst case scenario.. Anyways, 2005 4 life bro!! you know it!>
Man that thing is so bad ass. Can't wait to see it in action!
Love the truck man. Thanx for the this great videos. Your short videos are the best. I don't have the time to watch your live long videos so I missed out on a lot.
whats up bro! Yes, I am dedicating more time and effort to the high quality shorter videos, you're right! The live streams are mostly for the hardcore NitroGang audience. DOnt worry, I have not forgot about the shorter vids and making NItroGreat again, QUICK, lol!! I'll be doing more work on this soon.
Always dug the Foxx looks! Can't wait to see the resolve D.
hey bro! Thanks for checking this video out man! I'll be doing some repairs on this soon, I've ordered and already have the updated modern bearings for the clutch bell. Hopefully that will fix this SICKENING Kyosho, lol.
How long have you been running those servos? And how much time on them? Would be cool to see a review on your top servos and a longevity test. Thanks
The Foxx is Awesome..That engine runs and sounds good.Hopefully the new bell bearings fixes the problem
Sounds like the clutch bell is rubbing on the flywheel
hey bro! How you doing! Thanks for checking this video out man! I'll be doing some repairs on this soon, I've ordered and already have the updated modern bearings for the clutch bell. Hopefully that will fix this SICKENING Kyosho, lol.
Anyway, try some automatic transmission fluid on those needle roller bearings in the clutch. But really another issue will just occur anyway. I'm going to a custom 2 speed setup. Just waiting on parts.
YES! that's what we need! A normal 2-speed setup on these would be great!! If possible a basic slayer or t-maxx trans would be great! I'll be digging into the clutch system again on this truck soon bro! Don't worry, all the nitros will eventually run on this channel!>
Great job brining that Kyosho back to life ! I remember the unboxing, think it was on a live stream….
Hey bro!! I'm glad to know you remember the long history this truck has been though on my channel. So you know what I started with, it was basically missing the entire drivetrain, the linkages and the electronics. Took me a while to source all the parts, and it's still pissing me off!! anyways ive since gotten the modern bearings for the clutch bell, so we will continue on that path.
That is such a cool nitro. To bad about the clutch. Nice job rebuilding it. That 3 gear bell looks awesome but Holy cow is there going to be a bit of cantilever adverse effects on that bad boy, or it might just be hard on bearings by design. You'll get it sorted keep at it. Still this rig is designed better than my 1st generation gmc canyon. Only vehical I know of where you need to drop the, frt axle, transmission and oil pan to replace a timing chain. Classic case of nobody talking to each other in the engineering group....
🤔 1 channel
Foxx 2.0
3 speed baby
& 4 wheel steering...?
baby!
hey bro! How you doing! Thanks for checking this video out man! I'll be doing some repairs on this soon, I've ordered and already have the updated modern bearings for the clutch bell. Hopefully that will fix this SICKENING Kyosho, lol.
Love that car... although at speed 4 wheel steering can be sketchy lol. The more speeds, the better. Unless like me you run an absolute monster of a race buggy. (Be careful running the fuel line over the exhaust and touching the engine block - I have had bad experiences of the fuel boiling in the line) 350z's rule!! Not only do you have good taste in rc's but also good taste in full-size cars!
hey bro! YEs! You know we both got the best taste in RC and cars, lol!! BTW I used to sell the NISSAN brand of cars in dealerships long ago. Was a sickening job! Sold a few 370Zs at the time and 2 GTRs. I must say I loved the 370Z it was such a head tuner at the time, and still is. Anyways more on this soon!! NitroGang!!.
Glad you managed to get parts bro maybe when's it's broken in bud the clutch will sand it self down a bit bud
I LOVE THE WAY THIS RC LOOKS JUST SITTING THERE
(Where's my wltoys) lol
I gave you a broken engine now you can give me a broken RC lol
Yeah that Bell is ringing on the flywheel
can it be the meshing which is causing some sort of friction between the 3 speed and the engine clutch bell? is the engine aligned properly?
hey bro! Good question. I'm quite sure I've eliminated the MESH issue because 100% for sure the engine did not move during this test start and the mesh was find before I started the motor, right.. I'm thinking the roller bearings on the clutch bell are curing this somehow when some torque is applied to them. Anyways I've gotten modern bearings and will be replacing the needle bearings soon! More on this later bro! Thanks for watching and your suggestion.
Soo close man! Hard to tell through the video what exactly is going on but it seems to me like the bell is rubbing on the flywheel when the bearings moves around. Maybe try using a small walsher or spacer to keep the clutch bell from contacting the flywheel (if that's what's happening). Great video brorher!
Hey bro! I know, it's tough to really see and understand the situation. I am investigating it more as we speak and already ordered the modern bearings for the clutch bell instead of the stock Roller Style Needle bearings that Kyosho uses. I check the owners manual and I'm 100% sure the assembly is correct including all the right the right shims. So the next point of attack will be the bearings. The flywheel has normal clearance, so still a mystery.
So much for breaking it in🤣😅😂,we will see what ya find..happy holidays bro🤜🤛
YUP bro! I know! Always a situation when it comes to Kyosho! I try to present the REALITY of what I'm doing, you know. Sometimes this is what happens,. I guess not as eventful as the LAME Electric channels which always seem to be fine, cause their only goal is to sell you them! Sickening!>
I truly don’t understand how kyosho can put a truck out with this many obvious issues. And the crazy thing is that they are all easy to find because they all happen not long after break in
hey bro! you got a point right there! Although this particular truck has had a long history and the engine is from a a different truck. SO there is a long story of issues here, an do'm just trying to make it great again! Anyways, more on this soon! Cant kill a nitro!>
@@hybrid32494 you need the little part in the clutch bell where the screw goes.
Then. Boom!
What's up nitro gang. 3 speed problems gotta love them. great looking truck though. mosh pit of doom sickening. keep up the great work Dimitri. NWO for life.
hey dude! I'm glad to see you're catching up on some of my recent vids! I'm always trying to make nitros great again! even if this Kyosho tries to piss me off, I will not let it die! Truly sickening mosh pit right!! I used to that sort of stuff years ago, not I only have one mission!! To make nitro Great Again!.
Hi there big D, how’s it going dude, that’s what you call an rc, Three speed baby 🍼🍼🍼, hells yeah man 👨
Great video man, hopefully you can git er sorted soon, can’t wait to see it lit 🔥. 😎👍👍👍🇬🇧🍼🍼🍼🔥🔥
hey brother! How you doing! Major 3-speed BABY, it's not running well yet, but dont worry the NItroGang is on it!! I've since ordered new standard bearings for the clutch and I'll be putting it on soon, that will be the final test for this PISSENING Kyosho, lol!! NitroGAng!.
@@hybrid32494
Awesome, can't wait to see that dude. 🤠👍👍🇬🇧
Hello.
You have a part missing for the 3 speed clutch bell
It’s a small piece that fits inside the bell just before the screw
hey buddy! how you doing! I referenced the manual and the screw goes directly into the clutch bell shaft itself. There is nothing else there. Unless the KYOSHO manual is wrong, I'm a dead end right now. But I have a plan in the works, and I'm 95% sure it will fix all my problems.. Stay tuned my dude.
I would imagine that running an engine with a missing clutch shoe out of 3 would put a lot of unneeded pressure on the engine bearings because our weight distribution on the flywheel is now off. Its just a bad Idea all the way around. Don't have spare shoes/springs in your inventory?
Maybe the needle bearings in the 3 speed are seized.
👍🔥🔥🔥🔥
hey my dude! Whats up! I'll be doing more work on this kyosho soon, I will not let it die! We will make it great again soon!.
I agree high speed all 4 wheel drive no thanks !!!!! Thats for heavy hauling or those crawler trucks. Love the nitro not the steering
Hybird i am super excited for my new rc i am getting for christmas i noticed in your videos i dont see your girlfriend anymore i hope you and her are getting along still
3 speed yes but never run 🏃♂️ brother! Fix it and rip it!!!
hey my dude! Whats going on! Happy to see you here! I see you've been making some great RC choices lately, lets hope none of them piss you off like this SICKENING Kyosho, lol!! more on this truck soon, I'll be replacing the clutch bearings.
👍💨💨💨
thanks for watching bro!! NitroGang!
❤🍎🚘
Whats the fun to see these fake-fight shows?
lol, hey bro! NO reason, just a little variety in the video world, you know. Since I'm to trying o run boring lame crawlers I figured why not put in something a little different for a change into a video. And broaden our horizons, lol!! Not for everybody, but why not, right.
The Kyosho 3 speed system is absolutely trash.
hey bro! I will admit it's highly temperamental. But you know that it's also one of the main selling point of this chassis, so that's the problem. It's also a very CLOSE-RATIO 3-speed. I fact many single speed nitros are faster than this thing. But it's about the chain drive and 3-speed BABY! lol.
Sick brother thank you for helping me on Facebook
hey bro! For sure! You know I'm always glad to help man! This is what the NtiroGang does! We make other people's Rc adventures good the best we can! Thanks for watching bro!!.