Thank you got one of these to do soon. Now know what's involved. Had similar job on Transit connect van. Made long slim torx driver by cutting shaft from cheap screw driver type & welding into 8mm 3/8 socket. Looks like it's going to be needed again so time well spent!
No need to lock/time the pump, it just needs to turn to make high pressure for the fuel rail. There is constant Pressure at the injectors and they spray when they are switched by the ecu.
Martin Maxwell true - but it is still not a bad idea to keep the timing right in the chain. That’s the idea behind making sure the sprocket stays in the same place.
please, I don't have a removal tool, could I try with torexs? can i pull out the torex screw one by one and put some kind of screw in that place just to hold the gear? please can you explain step by step
Hi there, I am not an expert in Mechanic, therfore i needs you avdice please. If I cancelled my EGR Valve( With delete pipe) Should i needs to disconnect the electrical connector and Pressure pipe connected to EGR? They are on the back of the EGR. TDDI 2001 Hatcback. thx for you reply imhauseable
Hej og tak for dit video. Har du stadig det værktøj sæt? Hvis ja, er det så noget du vil sælge og sende til Bornholm? Godt nytår og bedste hilsner fra Bornholm. Odinn
Was the kit expensive mate. I have a freind who may have to replace his pump. He has bad injectors just now car will start on brake cleaner runs in a limp mode. But Chucks a heap of fuel back. His car is the mk3 Tdci 2.2 euro 4 someone had put 601 injectors in it which I believe are from euro 3 . Cheers mate 👍
@@imhauseable Det var en skam, for jeg har en kammerat der også gerne vil ha sin skiftet :) Hvor i DK bor du? Jeg tænkte på om vi måske kunne låne dit sæt til at skifte selv..
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
I just learnd that I don't have to take the complete timingchain mechanism apart .... thank god ...
Good description! Thank you, i saw everything i needed to see :)
Thanks! the info about the special torx tool needed is especially useful.
Thanks a lot mate! Good explaining and good video!!!
Thank you got one of these to do soon. Now know what's involved. Had similar job on Transit connect van. Made long slim torx driver by cutting shaft from cheap screw driver type & welding into 8mm 3/8 socket. Looks like it's going to be needed again so time well spent!
Haynes manual says tool is 303-1151 LOCKING TOOL and 310-083A SOCKET
one of the top video for make ford tdci ,i enjoyed this video ,big thumb up !
No need to lock/time the pump, it just needs to turn to make high pressure for the fuel rail. There is constant
Pressure at the injectors and they spray when they are switched by the ecu.
Martin Maxwell true - but it is still not a bad idea to keep the timing right in the chain. That’s the idea behind making sure the sprocket stays in the same place.
please, I don't have a removal tool, could I try with torexs? can i pull out the torex screw one by one and put some kind of screw in that place just to hold the gear? please can you explain step by step
Hi there, I am not an expert in Mechanic, therfore i needs you avdice please. If I cancelled my EGR Valve( With delete pipe) Should i needs to disconnect the electrical connector and Pressure pipe connected to EGR? They are on the back of the EGR. TDDI 2001 Hatcback. thx for you reply
imhauseable
Hej og tak for dit video. Har du stadig det værktøj sæt? Hvis ja, er det så noget du vil sælge og sende til Bornholm? Godt nytår og bedste hilsner fra Bornholm. Odinn
Very helpful video
Was the kit expensive mate. I have a freind who may have to replace his pump. He has bad injectors just now car will start on brake cleaner runs in a limp mode. But Chucks a heap of fuel back. His car is the mk3 Tdci 2.2 euro 4 someone had put 601 injectors in it which I believe are from euro 3 . Cheers mate 👍
Hi am doing this job in a few weeks what is the item number on eBay as I can't find it. Thank you
does anyone have a link for the tools or the correct name for the tool ??
Wait, this guy is Danish? I honestly thought he was Canadian 😂
I spent a year in Michigan as a kid, must be close enought to Canada that I picked up on some of that :D
Hej, hvor meget anderledes er denne “operation” på en mk4 ved du det ?😁
God info! Hvor lang tid tog hele projektet..? Og kan du evt overtales til at udføre sådan en operation?
Frit fra hukommelsen mener jeg der gik 3 timers tid med det. Det hjælper at have prøvet det før. Jeg tager desværre ikke opgaver ind :-/
@@imhauseable Det var en skam, for jeg har en kammerat der også gerne vil ha sin skiftet :)
Hvor i DK bor du? Jeg tænkte på om vi måske kunne låne dit sæt til at skifte selv..
thanks
Hi, could you tell me where did you found your tools to lock the chain?
Thanks a lot
Louis
Yeah sure, I found mine on eBay.co.uk there are a hundred different sellers all selling the same thing.
i hate people that talk about a tool and cant linked whyyy?
I will then assume that you hate me. I did however add a link in the description because of your friendly demeanor.