Question, after you are finished do you fill in the bottom where the stone meets the flooring with a product to prevent water intrusion coming in from the floor up into the brick?
What do you do to the top?? Do you need a seal to cover the gap between the concrete block and the natural stone cladding to prevent water from running down the middle? pls help
en Mexico antes de colocar la piedra se aplica un mezcla de cemento arena sobre el muro (zarpeado o enjarrado) y despues se coloca el adhesivo y la piedra
The presentation is great except no where is it indicated how thick the stone panels are. This is necessary in order to determine the kind of gap to be used at the top of a veneer panel.
hi i want to make these panels of my self but there is a problem here what is the material that introducing in this process i know there is white cement sand the otheres i dont know so please tell me what is the equation here thanks
You always start at the OUTSIDE corner and work to the inside corner where you make your end of run cut! Walls are never the perfect distance for the materials you are placing on them, I wonder what a cut wuould look like at the outside corner?UGLY thats what! I bet they built that wall just the right length! But stii, why show an improper way to use their products
I suppose to someone who doesn't look too close or those who are short sighted, but major flaw with all these fake stone veneers is that the only place you see straight vertical cuts is where the panels fit together - looks like crap to me. Now if they were smart enough, would be easy to change that, but obviously, they're not
this is progress, bring the un skilled into a trade. these veeners will last less time than a brick wall. if you want a proper skilled way of building your home for life use natural stone. this is nothing other than glorifying tiling
I have been seeing this stuff on a lot of new construction and am not impressed at all, I think this stuff should be banned, so they will have to use real stone or brick. Ive seen these things fall off in under a year.
Good job. Beautiful and impressive stone work cladding idea. Keep sharing such kind of clippings.
Such an impressive stone work cladding idea.
Question, after you are finished do you fill in the bottom where the stone meets the flooring with a product to prevent water intrusion coming in from the floor up into the brick?
What do you do to the top?? Do you need a seal to cover the gap between the concrete block and the natural stone cladding to prevent water from running down the middle? pls help
Stone looks really nice and the video is excellent
👍
I've installed panels in EPS made in Italy by Decoresin and BRILLIANT effect :-)
@Fuck you RUclips. it's true bored man hidden behind a shit nickname.
Brilliant video. I am thinking of making my own bricks using a veneer rubber mould.
👍
What is the best adhesive to use for an outdoor installation?
exterior tile adhesive
How do you waterproof it?
Can these be installed on an external wall that has previously been painted?
This gives proper Imformation thanks a lot
en Mexico antes de colocar la piedra se aplica un mezcla de cemento arena sobre el muro (zarpeado o enjarrado) y despues se coloca el adhesivo y la piedra
My walls have gaps for drainage .are these not suitable for that kind of wall
The presentation is great except no where is it indicated how thick the stone panels are. This is necessary in order to determine the kind of gap to be used at the top of a veneer panel.
hi
i want to make these panels of my self but there is a problem here what is the material that introducing in this process i know there is white cement sand the otheres i dont know so please tell me what is the equation here
thanks
can you install this over a rendered block wall?
Great work and thank you hepled a lot 😊😊
Can it go right over stucco?
how did i get here from carving pumpkins hehe :-D
AngeLa Christodoulou 😂
🤣🤣🤣 Sounds like me
7 years later I bet u have cladded walls in your garden???
Doesn’t it bridge the dpc
Can it be installed directly on to a timber frame building?
Negative. The adhesive/ardex doesn't bond well with wood.
There is one type Z cladding with hook . can be installed directly on timber frame board .
Can it be used for a shower wall please
Great vid but why is the worker wearing a reflective vest?? Is he worried someone will hit him with their vehicle or what ?? lol
He’s going for pints after work and won’t remember to put it on for the walk home
How to make adhesive plzz tell me sir
Superb Video! Thanks for sharing the info.
Is it weather proof? Is there any fungii due to heavy raining?
Yes it is weatherproof
he's starting with the internal corner though the audio said ALWAYS begin with an external edge???
You always start at the OUTSIDE corner and work to the inside corner where you make your end of run cut! Walls are never the perfect distance for the materials you are placing on them, I wonder what a cut wuould look like at the outside corner?UGLY thats what! I bet they built that wall just the right length! But stii, why show an improper way to use their products
@@petesahli3967 true thx
Very Good information Thanks for sharing....
👍
Nice work 👍
How much
rule number 1, don't stain your stone with thinset while you are installing it.. keep it clean it will not come off.
It would be interesting to see how the panels are made.
где сетка между стеной и облицовкой(zclad) на случай мороза?
how much is it?
So helpful 👌👍
Very good. Thanks for sharing.
Thank god he had a Hi Vis vest on
I am interested .
Good product! but I’ve installed a EPS decoresin panels for my garden
Whats with the vest lol?
Very nice sir
I suppose to someone who doesn't look too close or those who are short sighted, but major flaw with all these fake stone veneers is that the only place you see straight vertical cuts is where the panels fit together - looks like crap to me. Now if they were smart enough, would be easy to change that, but obviously, they're not
very very nice I think decor my living room best idea...
Nobody shows how to cut around a 90degree corner to another 90 degree ie a column , they always show exact fits done prior....
Awesome!
very easy job
very nice job . congratulations
Very good
واحنة بالعراق سيراميك عادي ومايدبرونة اتمنى الكة هيج ناس خبرة وتعرف تشتغل بفن مو بس نذب دم كلبنة فلوس وكلشي ميعرفون ...
Fatema Alkalep
اي والله صح السانج
Fatema Alkalep مو هنا المشكله اني عندي معرض سيراميك ا بيع المتر ب5ونص والخلفات يشتغلو پ6 هههههه يعني عمله اكثر من سعره
انا عندي معمل اذا بتحب ابعتلك هيك بضاعه
easily explained tnx
this is progress, bring the un skilled into a trade. these veeners will last less time than a brick wall. if you want a proper skilled way of building your home for life use natural stone. this is nothing other than glorifying tiling
correct. mine is already falling off... whole house was built by amateur "multi" builders
GOOD, RICH STONES doing in kerala well......
Naic
Nice Video !
‹ Looking For TURKEY NATURAL STONE'S
Cool! #StoneConceptCalgary
ممتاز
جيد
غتهفههعا
GREAT
the installer looks like a cartoon character
spideman 3 arenoso
ما شاء الله
hi good
أشكال ديكور الخشب
دلال البلوي
I have been seeing this stuff on a lot of new construction and am not impressed at all, I think this stuff should be banned, so they will have to use real stone or brick. Ive seen these things fall off in under a year.
f0rumrr old posts put up the wrong way as simple as that.
f0rumrr : Unbelievable !!!!
it's utter shit and they do fall off. particularly if installed by clowns
this ain't skills at all almost anybody can lay this stufg
شغل عادي جداً
that's a ugly brick colour.....
looks cheap and unprofessional