This is an update video to some of the mods completed on my 2016 Harley Street Bob. Tell me what you think.... They dyno came back 101HP & 115 FT/LBS torque.
Do u remember what exhaust setting u chose on the Fuelpack app?? Just installed the same exhaust and fp3 today on my 17 streetbob and wanna get this right the first time..
Crispy Clean Jedi Fxdb. Return that fuel pak get the power vision tuner. It’s better. Also if you can. Get it dyno. I mean the fuelpak will work for now. But if you do engine work. The fuelpak is garbage
I Hune. It has the S&S 110 kit. Stock heads. I also went with Woods TW-777 cams. I could get more power if I had bigger heads and TB. I can’t justify spending the money for Just 10 extra HP and Torque.
What seat is that and is it good in your opinion? I'm planning on getting a street bob in the near future but I will definitely be changing the seat to stop sliding backwards every time I accelerate like I do with the stock seat.
I notice you kept your mid controls and just added those highway pegs in front of them. My question is where did you find that kit with the pegs and all? To extend your feet.
@@Armadale031 I know it came out later..but it doesnt have the stage 3 .. So I was curious with the stock new school, compared to the old school with the stage 3.. so I could figure which to get.
The torque curve matters more than the final numbers ... my old DWG 95" would smoke everyone that bragged about their Branch Heads and shit ... I kept mine stock, heads that is, as they flow faster and bring the torque curve up ... as I had 105TQ at 2200 rpm, with 10:3 comp and Zippers Performance S&S ... this was 20 years ago mind ya, jus sayin
I found them on JP Cycles....they are Milwaukee Bar None...I think. You could check them out in my first video of the walk through of my bike. They are ok...if I could do it again...I wouldn't get them. I like the look but the bolt kind of rusted easily...minor rust. The mirror themselves held up though.
Wow your hp is not much more then mine but your about 15tq over me. Same bike and tuner just different components I have magna flow riot with s.e. intake with a power commander and Eric tuned 98hp with 101tq I was hoping the 107ci kit was over 110hp and 120 tq nice bike btw
I'm very happy with Eric's work. He advised to me that I could get more if I changed the heads and throttle body. He said I could get about 10 more in HP and TQ. I don't want to spend the extra money. I went with 110 S&S cylinders and a torque cam. So I don't think it is a true 107 ci kit.
Hey Airborne, thanks for the ride-along. You've renewed my interest in posting an update video of my bike. I updated my thumbnail for the last video I did for my bike to show the new derby cover I had made that pays homage to my own Airborne time. ruclips.net/video/u1mNL79myXQ/видео.html I also added a sissy bar to my bike since making this video. I've been looking at seats like this now that I have a sissy bar. How is your seat for longer rides?
jumpmaster1906. What's going on all American . The lepera is good for the rider but not so good on long hauls with a passenger. I just upgraded my suspension so I'll get more feedback from my passenger. Thanks for watching and please subscribe.
Butt Muncher u obviously know nothing about engine theory. It’s called scavenging bro. Google it. Learn a little. Maybe next time u won’t look like a dumbass when u comment on something.
the seat the handle bar and the sissy bar was how i was going to make mine :)
Love the red badges man!!
She looks and sounds good. Nice build!
Scott
Thanks man. I need to do an update video. It’s been awhile. I’ve changed the look of it.
@@Armadale031 I will have videos up on both my 1999 FXDX and 2015 FLSTF soon. I'm looking forward to seeing the new mods on your bike.
LTH !!!! Haha our fav 🤤
I have 2014 with woods 777 and S&S kit as well. We should meet up for a beer there I'm in Cardiff not far 🤙
Love those bars! Nice pick, who makes them?
Micco The Service Dog. Road 6 customs
Do u remember what exhaust setting u chose on the Fuelpack app?? Just installed the same exhaust and fp3 today on my 17 streetbob and wanna get this right the first time..
Crispy Clean Jedi Fxdb. Return that fuel pak get the power vision tuner. It’s better. Also if you can. Get it dyno. I mean the fuelpak will work for now. But if you do engine work. The fuelpak is garbage
Are those the 16” bars?
Sweet bike, I like that song at the end , whis that ???? Bike sounds excellent
evil_muscle muscled. Thanks man. It’s the Bassani Road Rage Mega
So now that you've had that seat for a while is it comfortable? Or is it rough.
The saddlemen is better.
Nice bike man, where can I get my hands on a set of those tank badges? Dig that look
joe tux. Thanks Man. Boardtracker Harley out of Wisconsin. They have an online parts website.
What cams? and did you just do the SE 110 (4") big bore kit, or the full 110 kit with cylinders/heads etc
I Hune. It has the S&S 110 kit. Stock heads. I also went with Woods TW-777 cams. I could get more power if I had bigger heads and TB. I can’t justify spending the money for Just 10 extra HP and Torque.
Thanks , great bike . Just trying to determine if I want to do performance or appearance mods this year. Thanks for the info
What seat is that and is it good in your opinion? I'm planning on getting a street bob in the near future but I will definitely be changing the seat to stop sliding backwards every time I accelerate like I do with the stock seat.
It's a Le Pera….it's ok...comfy but i'm tall and wish I can sit further. I've been looking into Lucky Dave's or the Saddelmen.
What bars are those? And what size?
Hell yeah Airborne!
Where'd you get that emblem?
Airborne 28. Amazon
I notice you kept your mid controls and just added those highway pegs in front of them. My question is where did you find that kit with the pegs and all? To extend your feet.
jonathan lopez. DK customs with Burly MX pegs.
Armadale031 FXDB i swear I’ve looked all over the place for some and had to settle with the ones you clamp on to your frame and they sucked ass
Very nice! Do you think those pipes are as loud as the short shots?
Harley Dave. No they're not as loud but they sound deeper with a grunt.
Noise doesn't make power. 2 into 1 pipes do.
very nice ride bro
Harley Davidson Breakout Ducati Panigale 1299. Thanks.
damn i love your bike i had a 2015 always wanted to mod my bike just like yours but i traded her in for a breakout :(
Just got me a 2016 street bob. How are the grips? I have the stock grips and they give off alot of vibration
HAILPROPHECY __. I love my defiance HD collection
Hey bro just wondering how much did you pay for your 2016. Just bought a 2017 from the dealership and feel like I got got..
@@robertrodriguez8082 I paid 14,000 had 13,000 thousand miles. It came with a full stage 1 upgrade, and 14 inch ape hangers.
Yeah but how much money did it cost to get 25 more horses?
Corey Mills. I sold it. So it doesn’t matter. RKS ftw
Well I mean I still have my street bob and was just wondering, but thanks for the help ftw I guess
Corey Mills. S&S kit is on their website. Just jugs. Install was like $700. Dyno $400
So basically with all the stage 3 additions .. Its equal to a new Milwaukee 8?
Bruh. The m8 came out later then this video. So yes obviously. But I’ve test rode most m8 and mine was faster.
@@Armadale031 I know it came out later..but it doesnt have the stage 3 .. So I was curious with the stock new school, compared to the old school with the stage 3.. so I could figure which to get.
Me Yes. Go new school.
The torque curve matters more than the final numbers ... my old DWG 95" would smoke everyone that bragged about their Branch Heads and shit ... I kept mine stock, heads that is, as they flow faster and bring the torque curve up ... as I had 105TQ at 2200 rpm, with 10:3 comp and Zippers Performance S&S ... this was 20 years ago mind ya, jus sayin
Would smoke a stock LRS
Can't wait to do cams on mine.
GiraffeInvasion. Yes!!
What kid of mirrors are those and where could I find them thanks.
I found them on JP Cycles....they are Milwaukee Bar None...I think. You could check them out in my first video of the walk through of my bike. They are ok...if I could do it again...I wouldn't get them. I like the look but the bolt kind of rusted easily...minor rust. The mirror themselves held up though.
Those jump wings tho!
Nice bike, I would have thought you would get more than 101HP for a stage III.
Mr Mike BB-M. Thanks. I went with a more torque Cam. Additionally I could get more if I put on a bigger throttle body.
Wow your hp is not much more then mine but your about 15tq over me. Same bike and tuner just different components I have magna flow riot with s.e. intake with a power commander and Eric tuned 98hp with 101tq I was hoping the 107ci kit was over 110hp and 120 tq nice bike btw
I'm very happy with Eric's work. He advised to me that I could get more if I changed the heads and throttle body. He said I could get about 10 more in HP and TQ. I don't want to spend the extra money. I went with 110 S&S cylinders and a torque cam. So I don't think it is a true 107 ci kit.
Hey bud I would like to ask you a question on how you did something. Could I email ?
Ask it here. I’ll answer
What lift in cams?
Woods TW777 cams
Who makes the bars man???
FlukenHappy. Road 6 Customs
Armadale031 thanks a lot bro ?? What size are they man I have the same bike and am thinking of getting those ?
FlukenHappy. 12”
Armadale031 sweeet maybe I’ll get 14” thanks man for all the quick responses man
Sucks that you sold it.I like this version of your bike the best..
Thanks. Me too. Very nimble.
So stage 3 ? How mutch u spend $$ make extra 20 pony s ?
Too much...lol
20hp is huge on a bike.
I haven’t seen your bike..... you on Pendleton
Joshua Hellis. I ride in Oceanside from time to time.
Don't get why people put suspension on bikes that limit their capabilities.
I’m going stage 2 soon. I can already see I’ve gotta go 3 now
John Michael. Well worth it
Nice my man!
Jonathan Benosa. Thanks homie
Perfecto
What map do you use
ouelket ken. It was dyno tunes with a power vision tuner.
Nice !
Why are you driving so fast?
👌🏻
rollin threw my old hood
Dan. I did love that hood
Lol where you at?
California
Niiicccceeeee
Очень красиво. Хочу такой же!
Sweet bike. Try legend shocks way better.
Jmv _8314. Thanks. Already got the legend revo
@@Armadale031 ok
Hey Airborne, thanks for the ride-along. You've renewed my interest in posting an update video of my bike. I updated my thumbnail for the last video I did for my bike to show the new derby cover I had made that pays homage to my own Airborne time. ruclips.net/video/u1mNL79myXQ/видео.html I also added a sissy bar to my bike since making this video. I've been looking at seats like this now that I have a sissy bar. How is your seat for longer rides?
jumpmaster1906. What's going on all American . The lepera is good for the rider but not so good on long hauls with a passenger. I just upgraded my suspension so I'll get more feedback from my passenger. Thanks for watching and please subscribe.
Airborne
Road 6 customs 12
Short shots do not affect the the low end torque Lmfaoo
Butt Muncher u obviously know nothing about engine theory. It’s called scavenging bro. Google it. Learn a little. Maybe next time u won’t look like a dumbass when u comment on something.
....u ain’t doing no racing
Roland Nez. Should I be?
Wayyyy too much going on with this bike lol like to the point where it has so many mixed parts that it doesn’t make it look good
Daniel Bardz. Gotta love aftermarket.