32A DPDT knife switch

Поделиться
HTML-код
  • Опубликовано: 21 окт 2016
  • ebay link -
    www.ebay.co.uk/itm/32A-2-Pole-...

Комментарии • 19

  • @patrioticgunner8034
    @patrioticgunner8034 Год назад +1

    The two sides in the opposite direction are both supplies( Ac/dc or Ac/Ac ) and the other side is use as the Load to the panel when it's used as a changeover switch.

  • @esequielgomez2002
    @esequielgomez2002 3 года назад

    Is there like a regular switch for this ?

  • @TccStudios501
    @TccStudios501 4 года назад +1

    can I use this to replace a simple push button on a circuit?

    • @pietkaify
      @pietkaify  4 года назад +1

      Depends. This swaps one supply to 2 loads or 2 supplies to a single load. It's a change over switch.

  • @tanglewoood
    @tanglewoood 2 года назад

    Solid copper contacts or just plated?

  • @antoniosalvador9754
    @antoniosalvador9754 5 лет назад +2

    can i use this for electric chain hoist for forward and reverse?

    • @anythingoldmechanical
      @anythingoldmechanical 4 года назад

      Yes.. simply cross the end connections (the jaws of the switch)

    • @AztecWarrior69
      @AztecWarrior69 3 года назад

      You are better off using a winch relay setup to run the hoist. The repeated up and down will wear out the contacts. These are not meant to be used as on off switches. They are mean to change over power from one set of contacts to the other every once and awhile. Like if one set of batteries are dead and you switch to the back up batteries.
      Winch relay setups are made for the faster, repeated in and out if hoists and winches.

    • @practicallab
      @practicallab 2 года назад

      No you use selector switch for reverse and forward

  • @ZahoorAhmedBrahvi
    @ZahoorAhmedBrahvi 5 лет назад +1

    thanks

  • @rahi7339
    @rahi7339 3 года назад

    im trying to use this on a ebike for dual battery setup, i want to use the switch to change the battery? is it posiible? can you also help me?

    • @pietkaify
      @pietkaify  3 года назад

      Just swap the supply side for the load side and vice versa.

  • @anythingoldmechanical
    @anythingoldmechanical 7 месяцев назад

    5,000 amps?
    Are you for real??

  • @drbill8352
    @drbill8352 7 лет назад +1

    FYI - these are AC not DC rated knife switches, careful because of arcing on high current applications, after a while these switches will weld shut.

    • @pietkaify
      @pietkaify  7 лет назад +1

      Should be fine using it off load to switch between different items. thats what kills 90% of knife type isolators.

  • @mdrizwanansari666
    @mdrizwanansari666 Год назад

    Bhai kya price ka h

  • @ranjitsingh4527
    @ranjitsingh4527 3 года назад

    How can I buy it

    • @pietkaify
      @pietkaify  3 года назад

      Just search dpdt knife switch in ebay. I only use ebay .co .uk so doesnt show listings available in other countries.