Yeah. Both their movements are incredible. I hate Lei’s, but they’re fun to watch. Of course King is just a gorgeous character. Such versatility in it’s move set.
highlights : 9:38 The king's 2 hits combo you won't see twice (so hard to place) 12:45 perfect 26:20 perfect 27:42 bad beat 28:30 Lei's power! 32:52 the 100% combo 34:19 : Lei's stage 41:56 100% combo to perfect 49:05 GREEEAT! 55:56 The spam! 58:33 Majin's art
My game-plan against Lei is to enjoy all the silly stuff he does, and if I win that's a bonus. :'D If a Lei is partying I find King is pretty good at partying to. Been ages since I had a silly match like that.
@11:30 He's always had a punch parry with 3+4. The launcher can land but it is dependent on how late the punch gets parried. Even more dependent on the stance he transitions into.
To the guy asking about how to use df+1: It's a strong round ender, due to the followup. You can often get off multiple when your opponent is one touch off KO. Can't be reversed by standard parries, either.
Agree. His style lost some grace, it feels like thuggish boxing at times, but I see how it can still be based on some jackie chan movies like wheels on meals.
To whom it may concern. Over Unity Electric Generator Design: By ☯AMA☯ Segment 1: 1 motor with hollowed bar connected to it standing vertically. Circular disc connected to bar that has magnets embedded in it's top side all around, surrounded in high permeability material to focus magnets outward pushing force in an upwards direction from top of disc. Segment 2: Hollowed out cylindrical Bar of material horizontally positioned. donut shaped platter that's flattened on all sides instead of rounded, all around the flat edge of this platter, from the center is a ravine in the center so structure looks more like 2 donut shaped platters flattened on all sides & sandwiched together against a smaller donut shaped platter that's flattened not rounded & between them both. Square openings are located all around the outside of platters edge on both sides & goes all the way through material. In these openings rectangular magnets surrounded in high permeability casings are slid into place all around platter in a matching pattern on both sides. N facing in then S facing in. Connect these securely all along the length of the horizontally positioned bar except at far ends and center. At both ends of horizontally positioned bar securely connect a ring of material that can be magnetically repelled (This will allow bar to spin when apart of completed construct) Build a hollow ring structure that has ring of magnetic repulsion around its inner ring that will be able to fit around main horizontally positioned bar and keep it from touching anything on account of the bar sitting on its magnetic field inside the ring. The ring structure has a rectangular bar protruding from it's outer edge & has small square platform on end of it that will allow it to be screwed in to another structure. Make 3 of these ring structures & position them (approx) over both ends of horizontally positioned bar & around it's center. Build hollowed out rectangular encasement that is separated into 2 pieces that can be placed on top of each other and screwed together. This encasement will fit over horizontal bar & everything that is immediately around this bar. Encasement needs areas all along it's top side that has screw openings that all structures inside that need to be fastened down will be able to screw into. (Best if encasement is transparent) Encasement has round opening at both ends so when in place horizontally positioned bar with round magnetically repel-able disc attached to it are sticking out. Build hollowed out ring structure (flattened not rounded) that has a hollowed out rectangular bar that protrudes from top and bottom of ring and has square platform at end of each that will be able to screw into inside of encasement on top and bottom. Ring structure should be able to separate into 4 halves (from middle separating top & bottom & from side to side on each) that sit on top of each other & side by side perfectly connected when encasement is closed. Hollowed out aspect of ring structure & it's protruding hollowed out bar that's connected to it is for conductive wiring to be placed so that the copper coil constructs not mentioned yet will be able to plug into this ring structure and the current can be diverted up through the hollowed out area to a point where another device can plug into it. On bottom of hollowed out ring structure there are openings where copper coil constructs can be plugged into. Build wide but small ring with ravine around its outer edge in center (kinda would look like the round metal piece you would see in a pulley system but not angled in) of structure (flat not rounded & not hollow in center). Copper coil will be coiled around this. Build hollowed out rectangular structure the length of the width of the wide small ring structure. Build a plug system within it so at the center of the rectangular structure it has proper electrical plug poking out that will be able to plug into bottom side of larger ring structure that is designed to divert current. At both ends of small rectangular plug system there should be flat rectangular legs hanging down so that you can fit it perfectly over center of small wide ring structure that has copper coil wound around it & screw openings at bottom of these flat rectangular legs so they can be screwed together. Ends of the copper coil are fed up into the plug securely. With wiring in place screw top halves of ring structure together still separate from bottom halves. Then with wiring in place screw bottom halves of ring structure together. Now screw the already connected top halves to the inner top encasement structure & same for bottom halves. Two main encasement structures still disconnected at this point. (Fine point... there are as many of these ring structures with copper coil constructs plugged into them as there are the magnetic disc constructs lined up across the length of the horizontal bar) This is because they are all to be lined up. Now with everything ready carefully lift up the Horizontal bar with the magnetic disc setup securely attached to it. At this point the magnetically repelling rings that are at far ends and center of bar should be hanging freely. Carefully position this whole thing in the bottom encasement so the copper coils are positioned perfectly in the ravine of the magnetic disc area connected to bar. Line the free hanging magnetic rings that have rectangle bars and square platforms up with the inner bottom of encasement and screw them in. At this point the horizontal bar is sitting on the magnetic fields in the rings and is securely in place connected to bottom encasement. Now pick up the top of encasement and carefully line it up the same but on top & then screw the top encasement to the bottom encasement. If lined up properly you will see that when the horizontally positioned bar is made to spin, the magnetic fields will interact with the coils that are perpendicular to the magnetic field lines and since the copper coils are positioned to hang withing the ravine, the magnets on both sides will magnify the effect to achieve greater results & since the magnets on both sides are set up N then S all the way around it will end up being AC current. At this point you may be wondering how will this ever equate to over unity? well we are about to get to the part that makes that possible. Build cylindrical structure (like a donut but flat not rounded on all sides but still hollow in center like a donut). The cylindrical structure is built in 2 parts. Top part & bottom part. Bottom half has a ridge close to bottom center area that circles around further into the center but not all the way in. On top of this ridge is a flat ring of high permeability (magnetic field shielding) material that has small openings that will allow magnetic fields through specific locations. The top flat side of the 1st part has rectangular grooves cut into it that go almost the entire distance from outside of cylindrical structure to hollowed out center. At both the outer edge and inner edge it instead cuts down sharply & narrowly at just over the width of the horizontal bar. This way when the horizontal bar in it's encasement is sitting in this spot the case fits down in and bar slides down in with a little extra space but the encasement can't shift forwards & backwards. The top half of cylindrical structure has same groove but no extended ridge going further towards center. Fill the rest of the rectangular grooves with duplicates of the electric generator construct. Now carefully position top of cylindrical structure in place and screw it to bottom section. Now position the motor segment with the vertical bar that has discs on it in center of cylindrical construct so the disc is lined up perfectly underneath the inner ridge that has the flat ring of high permeability material fastened to it. Now you can duplicate this whole setup and stack it for more electrical output. (The only thing that would need to be duplicated with the motor & vertical bar setup is for you to add another disc with magnets embedded in it, higher up on the vertical bar you are already using). When you turn motor on the discs will spin and the magnetic fields on them will only interact with the discs on the horizontally positioned bars when the magnetic field lines go through the small openings in the high permeability material. Since those openings are lined up with the edge of the discs connected to the horizontally positioned bars, it will force them to spin, effectively generating lots of electrical current. Just make sure to let enough of that current pump energy into the 1 motor you are using to run things, and the rest of the electric current is over unity. If you are still wondering how this could end up being over unity, the answer is simple. The device exploits magnetic field effects connected to the vertically positioned bar connected to the motor to have them do all the extra work so the motor does not have to. And since the magnets are exerting there force upwards while the bar spins around sideways, the motor won't be getting a detrimental amount of push back. This design invented by ☯AMA☯
hes nowhere near as easy as using leroy though, you need good execution to be great lei, you wanna be the next leroy smith you have to have easy execution, and leroy is some of the easiest character to pick up in the game by far for me imho.
@@tekkenkasur who says i dont play leroy? My leroy is only vindicator its pretty sad yes but i play him once in a while.. but my main is shaheen and paul, shaheen got nerfed so its pretty depressing sometimes, i pick leroy, noctis and paul to relieve my stress from the hard execution shaheen gives, but still my highest rank is my shaheen since i play shaheen alot and love challenges so characters that has tough execution i like, i just wished his unecessary nerfs never happened the wr33 and snk2 when hes nowhere near the stupid strong characters in the first place smh.. anyways i do play leroy, not as good as you probably, but learning him was the easiest for me.
@@tekkenkasur take that back your leroy is wayy better lmfao, nice channel man, you should make a logo for your profile pic channel, i thought you're not a content creator if you were i wouldve checked you out earlier
the punch parry depend which button he press during that parry animation coz every button is different stance if he presses nothing its into snake ..thts some advanced lei being able to pull tht off like tht - nice match
The punch parry is an old move from the previous games (move notation:3+4). Guaranteed but very situational and unreliable, because parry take place from the 8th active frame after the moment when u press 3+4
Shit you guys probably didnt even get into the surface of Supercharging GURANTEE + frame afters Lei's got,here's why people should consider labing Lei's cheap ass more. TRG 1: +2 on BLOCK guaratees a SAFE WS+4 mashable follow up,since you block TRG 1,the follow up from the plus frames speeds your next move up,WS+4 is clocked at 9 frames,faster than your opponents options outside of rage arts/power crushes. If a WR+4 OR d/f+4 hits you,Lei is at +7 which GRANTS him another 9 frame spammable set up in doing f+3.Notice Lei does the same battle cry with f+3 and F~3? LMAO The list continues,hes gonna be nerfed soon.
Dude that parry is from tekken 4 lol and he is full of parries, many of them unreliable or too risky but they give you a full launcher lol. they are very useful against steve lol. f 4,1 ... is a strong match, because it has -1 but can continue the string or enter stance, the first one is high you can duck it, he problem is the are a lot of variations or mental tricks, it's not so easy. people think dragon stance is the strongest but it's not lol.
@ 1:54 imagine a 3-4 bar nd having to block that twice a round. Then he can mix in a hop kick instead of going low for the same combo. Tekken not the same skill based game it was. Its all about character choice/ tools now. Who does what better?
Tekken has always been like this bro. Every character has good tools, yes there are some better than others but only matter the ones you use it and how , in the best moment. Lots of characters has some mixups like that one.
@@nestormora5327 yes i know. I been playing tekken for nearly 20 years... This the first time ive felt its not a technical game cause they made it too easy. New characters too strong. Lei has NEVER been this oppressive.
Majin have been your fan for the longest time. I'm trying to hit the join button and pay, but m unable to. I want you to review my gameplay for a few months. I am unable to get the payment through. Please suggest. Regards, you biggest fan.
No offense but this comes off as scrubby and requiers a response in the form of "git gud". With that being said, I can help you with Lei and Kuni MU stuff
Eddy is ok but that's because he's had those moves since Tekken 3. Kuni is a little bit more tricky because she's new and has some new stuff. Same with Lei
Quan Cena might be one of the best names ever
How 'bout Juan 🐴 Cena tho 👀🥵
@@dejawho4147 Quan is way more unexpected & creative.
@@dejawho4147 that would be hilarious
@@GolfingFetus Quad would be good too 😁
Both of them play their characters so masterfully it's beautiful to watch.
...Harddrive almost full bcuz of such awesome matches. Using The Tactics Displayed To Add to my repertoire.
Pro play at its finest.
Yeah. Both their movements are incredible. I hate Lei’s, but they’re fun to watch. Of course King is just a gorgeous character. Such versatility in it’s move set.
highlights :
9:38 The king's 2 hits combo you won't see twice (so hard to place)
12:45 perfect
26:20 perfect
27:42 bad beat
28:30 Lei's power!
32:52 the 100% combo
34:19 : Lei's stage
41:56 100% combo to perfect
49:05 GREEEAT!
55:56 The spam!
58:33 Majin's art
“Play dead into dead for real” 😂😂😂 best line ever! 😂😂😂😂😂😂😂😂😂😂😂😂😂 @lil_majin
1:26 that was so sick, opting to lose combo damage in order for drunken transition oki into another floor break. 27:50 lmao this set is lit
-Mom mom! Can you buy me the Leroy DLC please?
-We have Leroy at home.
Leroy at home:
When a character is incredibly complex to use and requires a hugh ammount of skill to master it becomes "cheesy".
My game-plan against Lei is to enjoy all the silly stuff he does, and if I win that's a bonus. :'D
If a Lei is partying I find King is pretty good at partying to. Been ages since I had a silly match like that.
King vs Lei is a real fun matchup
@@BoneMachine1443 Hard for the King player though. Lei neutralises a lot of King's strengths.
@11:30
He's always had a punch parry with 3+4. The launcher can land but it is dependent on how late the punch gets parried. Even more dependent on the stance he transitions into.
So in that particular instance, it's guaranteed
Jackie chan taking on the entire WWE in one man.
"Play more for the match-up experience than for the 'Rank" That is the better mindset.. 👍
58:30 Beastly Way To Put Dwn a Lei Master
Hey lil majin would it be possible for you and k-wiss to play? I wanna see you guys go at it king vs hwoarang? Please make this happen?
Those back hops you were doing was godly lol
I need more majin vids. I keep missing the streams because of work.
27:50 WTF!?
Lei can heal in a drunken master stance
To the guy asking about how to use df+1:
It's a strong round ender, due to the followup.
You can often get off multiple when your opponent is one touch off KO.
Can't be reversed by standard parries, either.
Very entertaining set.
Good stuff, King.
Lei is my favorite character in Tekken, but I wasn’t a fan of his design in Tekken 7.
yeah i always play with his young outfit
His moves are all changed around and shtty now no fluidity
Agree. His style lost some grace, it feels like thuggish boxing at times, but I see how it can still be based on some jackie chan movies like wheels on meals.
yes
even being a lei player I don't like his new design tekken 5 lei design was best
I've seen Lil Majin lose before but this guy is the first guy I've seen really dominant him... There's always a bigger dog somewhere...
Wait!!! At 27:47 majin had that round but that dude increased his health at the last moment. Is it only me who noticed that?
Lei can recover some health in his drunken stance by pressing 1+2
heard something about his character's (Lei) ability to heal in drunken master stance?
😈
Lei can recover health in drunken stance with 1+2, but be careful, he also has a fake out move while recovering. I'll be posting some lei content soon
He can only do this fake out in ub1+2, and it’s really unreliable in higher levels of play cuz it’s super noticeable
Lei was a character I liked as well to
Lei's tiger stance is an auto punch parry. Panther is low attack parry and crane is auto low attack jump.
55:55 5-Kick Trap (Lei) Five his Lucky #..
Keep up the great content love your playstyle
Both of you are amazing... enjoyed a lot
Watching a skilled Lei-player is honestly the most beautiful Tekken can be to me.
11:24 lei stance transition(3+4) is a punch parry
Yep! And each animal stance has a guaranteed follow after parry
To whom it may concern.
Over Unity Electric Generator Design: By ☯AMA☯
Segment 1: 1 motor with hollowed bar connected to it standing vertically. Circular disc connected to bar that has magnets embedded in it's top side all around, surrounded in high permeability material to focus magnets outward pushing force in an upwards direction from top of disc.
Segment 2: Hollowed out cylindrical Bar of material horizontally positioned.
donut shaped platter that's flattened on all sides instead of rounded, all around the flat edge of this platter, from the center is a ravine in the center so structure looks more like 2 donut shaped platters flattened on all sides & sandwiched together against a smaller donut shaped platter that's flattened not rounded & between them both. Square openings are located all around the outside of platters edge on both sides & goes all the way through material. In these openings rectangular magnets surrounded in high permeability casings are slid into place all around platter in a matching pattern on both sides. N facing in then S facing in.
Connect these securely all along the length of the horizontally positioned bar except at far ends and center.
At both ends of horizontally positioned bar securely connect a ring of material that can be magnetically repelled (This will allow bar to spin when apart of completed construct)
Build a hollow ring structure that has ring of magnetic repulsion around its inner ring that will be able to fit around main horizontally positioned bar and keep it from touching anything on account of the bar sitting on its magnetic field inside the ring. The ring structure has a rectangular bar protruding from it's outer edge & has small square platform on end of it that will allow it to be screwed in to another structure. Make 3 of these ring structures & position them (approx) over both ends of horizontally positioned bar & around it's center.
Build hollowed out rectangular encasement that is separated into 2 pieces that can be placed on top of each other and screwed together. This encasement will fit over horizontal bar & everything that is immediately around this bar. Encasement needs areas all along it's top side that has screw openings that all structures inside that need to be fastened down will be able to screw into. (Best if encasement is transparent) Encasement has round opening at both ends so when in place horizontally positioned bar with round magnetically repel-able disc attached to it are sticking out.
Build hollowed out ring structure (flattened not rounded) that has a hollowed out rectangular bar that protrudes from top and bottom of ring and has square platform at end of each that will be able to screw into inside of encasement on top and bottom. Ring structure should be able to separate into 4 halves (from middle separating top & bottom & from side to side on each) that sit on top of each other & side by side perfectly connected when encasement is closed. Hollowed out aspect of ring structure & it's protruding hollowed out bar that's connected to it is for conductive wiring to be placed so that the copper coil constructs not mentioned yet will be able to plug into this ring structure and the current can be diverted up through the hollowed out area to a point where another device can plug into it. On bottom of hollowed out ring structure there are openings where copper coil constructs can be plugged into.
Build wide but small ring with ravine around its outer edge in center (kinda would look like the round metal piece you would see in a pulley system but not angled in) of structure (flat not rounded & not hollow in center). Copper coil will be coiled around this. Build hollowed out rectangular structure the length of the width of the wide small ring structure. Build a plug system within it so at the center of the rectangular structure it has proper electrical plug poking out that will be able to plug into bottom side of larger ring structure that is designed to divert current. At both ends of small rectangular plug system there should be flat rectangular legs hanging down so that you can fit it perfectly over center of small wide ring structure that has copper coil wound around it & screw openings at bottom of these flat rectangular legs so they can be screwed together. Ends of the copper coil are fed up into the plug securely.
With wiring in place screw top halves of ring structure together still separate from bottom halves. Then with wiring in place screw bottom halves of ring structure together. Now screw the already connected top halves to the inner top encasement structure & same for bottom halves. Two main encasement structures still disconnected at this point. (Fine point... there are as many of these ring structures with copper coil constructs plugged into them as there are the magnetic disc constructs lined up across the length of the horizontal bar) This is because they are all to be lined up. Now with everything ready carefully lift up the Horizontal bar with the magnetic disc setup securely attached to it. At this point the magnetically repelling rings that are at far ends and center of bar should be hanging freely. Carefully position this whole thing in the bottom encasement so the copper coils are positioned perfectly in the ravine of the magnetic disc area connected to bar. Line the free hanging magnetic rings that have rectangle bars and square platforms up with the inner bottom of encasement and screw them in. At this point the horizontal bar is sitting on the magnetic fields in the rings and is securely in place connected to bottom encasement. Now pick up the top of encasement and carefully line it up the same but on top & then screw the top encasement to the bottom encasement. If lined up properly you will see that when the horizontally positioned bar is made to spin, the magnetic fields will interact with the coils that are perpendicular to the magnetic field lines and since the copper coils are positioned to hang withing the ravine, the magnets on both sides will magnify the effect to achieve greater results & since the magnets on both sides are set up N then S all the way around it will end up being AC current. At this point you may be wondering how will this ever equate to over unity? well we are about to get to the part that makes that possible.
Build cylindrical structure (like a donut but flat not rounded on all sides but still hollow in center like a donut). The cylindrical structure is built in 2 parts. Top part & bottom part. Bottom half has a ridge close to bottom center area that circles around further into the center but not all the way in. On top of this ridge is a flat ring of high permeability (magnetic field shielding) material that has small openings that will allow magnetic fields through specific locations. The top flat side of the 1st part has rectangular grooves cut into it that go almost the entire distance from outside of cylindrical structure to hollowed out center. At both the outer edge and inner edge it instead cuts down sharply & narrowly at just over the width of the horizontal bar. This way when the horizontal bar in it's encasement is sitting in this spot the case fits down in and bar slides down in with a little extra space but the encasement can't shift forwards & backwards. The top half of cylindrical structure has same groove but no extended ridge going further towards center. Fill the rest of the rectangular grooves with duplicates of the electric generator construct. Now carefully position top of cylindrical structure in place and screw it to bottom section. Now position the motor segment with the vertical bar that has discs on it in center of cylindrical construct so the disc is lined up perfectly underneath the inner ridge that has the flat ring of high permeability material fastened to it. Now you can duplicate this whole setup and stack it for more electrical output. (The only thing that would need to be duplicated with the motor & vertical bar setup is for you to add another disc with magnets embedded in it, higher up on the vertical bar you are already using). When you turn motor on the discs will spin and the magnetic fields on them will only interact with the discs on the horizontally positioned bars when the magnetic field lines go through the small openings in the high permeability material. Since those openings are lined up with the edge of the discs connected to the horizontally positioned bars, it will force them to spin, effectively generating lots of electrical current. Just make sure to let enough of that current pump energy into the 1 motor you are using to run things, and the rest of the electric current is over unity. If you are still wondering how this could end up being over unity, the answer is simple. The device exploits magnetic field effects connected to the vertically positioned bar connected to the motor to have them do all the extra work so the motor does not have to. And since the magnets are exerting there force upwards while the bar spins around sideways, the motor won't be getting a detrimental amount of push back. This design invented by ☯AMA☯
lei is now powerful in snake stance. he is like leroy smith now. his new move is low-high, a natural combo and plus on block.
hes nowhere near as easy as using leroy though, you need good execution to be great lei, you wanna be the next leroy smith you have to have easy execution, and leroy is some of the easiest character to pick up in the game by far for me imho.
@@reishakyu3553 if that's so, then why don't you play leroy? by the way what is your main character?
@@tekkenkasur who says i dont play leroy? My leroy is only vindicator its pretty sad yes but i play him once in a while.. but my main is shaheen and paul, shaheen got nerfed so its pretty depressing sometimes, i pick leroy, noctis and paul to relieve my stress from the hard execution shaheen gives, but still my highest rank is my shaheen since i play shaheen alot and love challenges so characters that has tough execution i like, i just wished his unecessary nerfs never happened the wr33 and snk2 when hes nowhere near the stupid strong characters in the first place smh.. anyways i do play leroy, not as good as you probably, but learning him was the easiest for me.
@@tekkenkasur take that back your leroy is wayy better lmfao, nice channel man, you should make a logo for your profile pic channel, i thought you're not a content creator if you were i wouldve checked you out earlier
@@reishakyu3553 Shaheen? Hard execution? LMAO
the punch parry depend which button he press during that parry animation coz every button is different stance if he presses nothing its into snake ..thts some advanced lei being able to pull tht off like tht - nice match
Dropping the sauce just i go to sleep much love from London g keep up the dope skills and content
The punch parry is an old move from the previous games (move notation:3+4). Guaranteed but very situational and unreliable, because parry take place from the 8th active frame after the moment when u press 3+4
he has that parry since tekken 4 lol.
So its not 10 frames startup? Whats jin parry startup?
@@GohersWay lol Jin's parry is way better
@@saporob bullshit, lei only had f+3+4 parry in T4. Which is not this move & led to nothing gaurenteed
Dude I have a question, how to low parry?
hold down forward
Thanks
@@Zerotheism welcome
I haven’t seen you drop so many combos in a while... that connection was pretty ass from time to time lol
This is who I'm going to take the title with
Its ridiculous how lows even go into full combos to begin with. Even more ridiculous that every character cant launch from lows.
The most ridiculous is that you have 12 frame lows starting 80+ damage combos.
Shit you guys probably didnt even get into the surface of Supercharging GURANTEE + frame afters Lei's got,here's why people should consider labing Lei's cheap ass more.
TRG 1: +2 on BLOCK guaratees a SAFE WS+4 mashable follow up,since you block TRG 1,the follow up from the plus frames speeds your next move up,WS+4 is clocked at 9 frames,faster than your opponents options outside of rage arts/power crushes.
If a WR+4 OR d/f+4 hits you,Lei is at +7 which GRANTS him another 9 frame spammable set up in doing f+3.Notice Lei does the same battle cry with f+3 and F~3? LMAO The list continues,hes gonna be nerfed soon.
@@zeokenx2 that didn't age well bro
what is the font you used for "too powerful" in the thumbnail! thank you lil majin
Bro when u gonna do the Hulk Hogan
52:10 thats a back 2 then to dragon to tiger then hell sweep brooo
49:13 SYNC WITH THE MUSIC
Epic Lei
So it's not just me who got hit my that King's drop attack from high jump lol
27:49 that was sick
@Lil Majin You can use the rising knee to interrupt many of Lei's moves.
Lei is best character if play well
27:50 WOW
as a lei player yeah he got a lot of new tricky moves
If Lil Majin says something is “Godlike”, you should check it out 😆
What controller/stick do you use?
Fuckin love Lei. Such a wild and expressive character. No two of them play alike. Well, no two GOOD Lei's play alike lmao
Today's Lil Majin match.....
.. AND HIS NAME IS QUAN CENA 🤣
Lol!
Lei reminds me of a young Adachi. If you see it, you're cultured as well fufufu
QuanCena just bodied me as Lidia in T8 yesterday
Anytime the connection is a little off i can’t play well which gets me so mad cause you end up dropping combos and looking like a fool
Second match was a humble up.
Quan cena elder brother of john cena!
and Juan cena is their half mexican brother
Dude that parry is from tekken 4 lol and he is full of parries, many of them unreliable or too risky but they give you a full launcher lol. they are very useful against steve lol. f 4,1 ... is a strong match, because it has -1 but can continue the string or enter stance, the first one is high you can duck it, he problem is the are a lot of variations or mental tricks, it's not so easy. people think dragon stance is the strongest but it's not lol.
This move was never in T4, fact
Wait....G4 the channel itself............GONE?! as in sent to the cemetery GONE?!
Shout out to senpai relax aka senpai sour. A beast on tekken for xbox.
oh my God that guy amazing
Its a wonderful video because you and Quancena (LEİ
Lo dejo como un principiante, oh!!!
@ 1:54 imagine a 3-4 bar nd having to block that twice a round. Then he can mix in a hop kick instead of going low for the same combo. Tekken not the same skill based game it was. Its all about character choice/ tools now. Who does what better?
You started off talking about connection then the rest of your comment is talking about tekken not being skill based. Very confusing
@@Esthoneal how so? Read the post slowly. Its a big picture.
Its not confusing. You just dont understand. Big difference
Tekken has always been like this bro. Every character has good tools, yes there are some better than others but only matter the ones you use it and how , in the best moment. Lots of characters has some mixups like that one.
@@nestormora5327 yes i know. I been playing tekken for nearly 20 years... This the first time ive felt its not a technical game cause they made it too easy. New characters too strong. Lei has NEVER been this oppressive.
14:00
Man I got tilted at this lei player watching this set lol. Lows for days
I like ...that's a cheesy move!...as he does basic lunch punch kick kick..lol this is e
If!
Bro pls teach me
100 snake edges on shitty 4 bars, oh boy...
good
Lil Majin got to work on his game. Otherwise he will keep loosing to quality players
Season 4 Lei too powerful? This southerner has been drinking too much moonshine. Smh.
Majin have been your fan for the longest time. I'm trying to hit the join button and pay, but m unable to. I want you to review my gameplay for a few months. I am unable to get the payment through. Please suggest. Regards, you biggest fan.
Wait whattttttt
Lei Wo Long is the most annoying character next to Paul.
Lei too powerful? Nope, not in any way.
Leiroy wulong
I am ironman
Sup majin
McDonald's cable
Its me or you are getting bullied by everyone lately 😅
Get to Tekken gawwwwd omega
Lei, kuni, even eddy need nerfs. The characters are just broken online. Too many unseeable lows that go into full combos.
No offense but this comes off as scrubby and requiers a response in the form of "git gud". With that being said, I can help you with Lei and Kuni MU stuff
Eddy? Heel naw; I used to think like you until I learned him, he sucks.
Eddy is ok but that's because he's had those moves since Tekken 3. Kuni is a little bit more tricky because she's new and has some new stuff. Same with Lei
Kuni has very bad lows lol
@@slushowoff *Very bad lows from standing
i cant watch this keep choking with king lol
I played this dude. Whooped his ass with my Leo. He plays Heihachi too.
He's not to powerful!!! He's just really really irritating 😩😩😩
Hahahahaha
He definitely wasnt playing the same when he got the ranking i know you a super pro but it didnt matter before lol
He is using only low move he is look like cheater
Imagine watching wwe shity product instead of Aew