this is great! I only have a couple of nitpicks to give about your build: 1. The heavy oil cracking goes straight into light oil cracking, and will not feed into light oil storage tank at all, as there are pumps in the way. This can allow for a backup of petroleum with no light oil to use. Consider sending the oil straight into light oil tank so that the byproducts can be properly balanced. Which brings me to my second point. 2. You can set easier conditions for when the pumps will work! Have the heavy oil overflow pump connected to heavy oil tank and set to "on if heavy oil > 15k" This allows your lubricant tank to fill up just fine, as you said, lubricant can suddenly be drained by blue belts. Have light oil overflow pump connected to light oil tank only (only need 1 pump) and set to "on if light oil > 15k" This also allows you to have backup in case you spend a lot on light oil in solid fuel AND rocket fuel (since that's a thing now). If you do the first thing I pointed out, this will ensure a proper balance of oils and petro are being used.
One very important thing about solid fuel (I learned this the hard way yesterday :D).. You will need to seperate your coal lines into coal as an ingredient and coal to burn. The coal used in science and as an ingredient.. Like in plastic, can NOT be replaced by and/or mixed with solid fuel. It has to be pure coal. But any coal that is burned.. So in smelters or power generator plants.. Can be mixed with and/or totally replaced with solid fuel. I initially just mixed solid fuel with my existing coal lines.. Then had to clean everything up as solid fuel can not be used as a coal replacement in ingredients.
Petroleum gas is not a gas, it is a liquid. Gas is short for gasoline. Petroleum gets shortened to petrol in UK English. Gasoline gets shortened to gas in US English.
You absolute madlad, you did a demonstration of how you built it all at the end! This will be great to learn how to build this manually. I really need to learn how to make crafting robots now lol. Thanks for the video
That is my next thing tomorrow (maybe tonight :D).. Construction Robots. I am using the 'Nanobots: Early Bots' mod.. But it is time to migrate to normal bots now.. Or to integrate Early Bots into the logistics network. This is my first time to this stage (just bought Factorio at 1.0 release).
So it’s as easy as 1, 2, 3 .... and 30 minutes later all I retained are the words pipes, heavy oil, pretoleum, and kraken. You’d certainly be a good car auctioneer!
Absolute godsend! I've been putting off oil and chemical science because I just didn't know where to start. Is this just a small interlude before episode 8 comes?
So.. The absolute hardest part of advanced oil is it has to be balanced. If any one of the 3 inputs gets full (Petroleum Gas, Heavy Oil, or Light Oil) it will shut down the refineries. That is why learning how to use the Constant Combinator, Hooking it up via a red wire to both tank level and the pump is critical. I spent 3 or 4 hours learning how all this worked yesterday. In the end, I basically had a very similar system to what you designed for the intermediate stage.. Except I added in a heavy oil tank too. I also have overflow protection for both Heavy Oil and Petroleum Gas to make Solid Fuel. This should usually not happen, but If there is a sudden increase in tank levels to close to maximum, it starts sending the item to temporarily make sold fuel and lower the tank level rather than turning off all the refineries.
I know this is a month later, but if you're still having some light issues, you can read the comment I posted on this same video. This will help simplify things in the future for you (no need for combinators, although, good on ya for learning that.)
@@asdfghjklkjhgfdsa69 i've watched several dozen hours of his content, got used to it at 1.25 and tryed 1.5 out, which first feels a little stressed but after a couple minutes i barely noticed it and got used to :)
@@asdfghjklkjhgfdsa69 if you already know what he's trying to do, it's easier. ;) And there's always going back and/or slowing down for certain bits. I tend to watch JD at 2.3x for most things, though for a tutorial like this he seems to talk a bit faster?? so I only watched this at 1.8x. :) (And if you're wondering how I got those speeds, it's because I'm using an extension: chrome.google.com/webstore/detail/video-speed-controller/nffaoalbilbmmfgbnbgppjihopabppdk )
@@DavidLindes 2.3x now that's mad xD 1.5 you're still somewhat able to hear and understand every word. people who speak fast are unwatchable at 1.5x but hey what ever you prefer ^^
I do not know why heavy oil constantly requires me to click change recipe just to get it to not stall out so I can get Lubricant from my Chomical plant. Basic oil (petroleum) does not need constant attention it works by itself fine. What is the difference ?
there are chemicals and liquids you can mix that react with each other to produce a gas but the thin is we call gas that we burn in cars, the liquid kind of gas something it is not cause it is not gas at all it is a liquid. many things are named in such a way and makes life rather confusing at times... Humans.
I am confused. I built this near identically in my world and I am barely getting any light oil. Maybe 4 of the plants get enough light oil to make solid fuel. Any ideas would be great.
kind of late to this but my petroleum keeps backing up, stopping all refineries in the process ;d I srsly hate asking for help but this shit just seems impenetrable for me ;;;;-;
then you have to build more stuff that needs petroleum ;) or save the excess in barrels or burn it (there is a mod that gives you flares to burn excess stuff)... there are many ways! welcome to factorio.
this is great! I only have a couple of nitpicks to give about your build:
1. The heavy oil cracking goes straight into light oil cracking, and will not feed into light oil storage tank at all, as there are pumps in the way. This can allow for a backup of petroleum with no light oil to use. Consider sending the oil straight into light oil tank so that the byproducts can be properly balanced. Which brings me to my second point.
2. You can set easier conditions for when the pumps will work! Have the heavy oil overflow pump connected to heavy oil tank and set to "on if heavy oil > 15k" This allows your lubricant tank to fill up just fine, as you said, lubricant can suddenly be drained by blue belts. Have light oil overflow pump connected to light oil tank only (only need 1 pump) and set to "on if light oil > 15k" This also allows you to have backup in case you spend a lot on light oil in solid fuel AND rocket fuel (since that's a thing now). If you do the first thing I pointed out, this will ensure a proper balance of oils and petro are being used.
One very important thing about solid fuel (I learned this the hard way yesterday :D)..
You will need to seperate your coal lines into coal as an ingredient and coal to burn. The coal used in science and as an ingredient.. Like in plastic, can NOT be replaced by and/or mixed with solid fuel. It has to be pure coal.
But any coal that is burned.. So in smelters or power generator plants.. Can be mixed with and/or totally replaced with solid fuel.
I initially just mixed solid fuel with my existing coal lines.. Then had to clean everything up as solid fuel can not be used as a coal replacement in ingredients.
Petroleum gas is not a gas, it is a liquid. Gas is short for gasoline. Petroleum gets shortened to petrol in UK English. Gasoline gets shortened to gas in US English.
in the German translation it's literally called "liquid gas" lol
You absolute madlad, you did a demonstration of how you built it all at the end! This will be great to learn how to build this manually. I really need to learn how to make crafting robots now lol. Thanks for the video
That is my next thing tomorrow (maybe tonight :D).. Construction Robots. I am using the 'Nanobots: Early Bots' mod.. But it is time to migrate to normal bots now.. Or to integrate Early Bots into the logistics network. This is my first time to this stage (just bought Factorio at 1.0 release).
So it’s as easy as 1, 2, 3 .... and 30 minutes later all I retained are the words pipes, heavy oil, pretoleum, and kraken. You’d certainly be a good car auctioneer!
i'm in the same boat as you haha
Oh man.. I needed this video yesterday when I was figuring out oil :)
Absolute godsend! I've been putting off oil and chemical science because I just didn't know where to start. Is this just a small interlude before episode 8 comes?
So.. The absolute hardest part of advanced oil is it has to be balanced. If any one of the 3 inputs gets full (Petroleum Gas, Heavy Oil, or Light Oil) it will shut down the refineries.
That is why learning how to use the Constant Combinator, Hooking it up via a red wire to both tank level and the pump is critical. I spent 3 or 4 hours learning how all this worked yesterday.
In the end, I basically had a very similar system to what you designed for the intermediate stage.. Except I added in a heavy oil tank too. I also have overflow protection for both Heavy Oil and Petroleum Gas to make Solid Fuel. This should usually not happen, but If there is a sudden increase in tank levels to close to maximum, it starts sending the item to temporarily make sold fuel and lower the tank level rather than turning off all the refineries.
I know this is a month later, but if you're still having some light issues, you can read the comment I posted on this same video. This will help simplify things in the future for you (no need for combinators, although, good on ya for learning that.)
Great video! Thanks for sharing info.
Excellent video! Thank you
Good stuff.
oh wow .. i'm so used to watch you at 1.5 speed .. i thought you're drunk in the initial seconds at 1.0 speed xD
How the hell do you manage to follow at 1.5 speed? I rewatch these multiple times while doing it because there's always something I miss haha
@@asdfghjklkjhgfdsa69 i've watched several dozen hours of his content, got used to it at 1.25 and tryed 1.5 out, which first feels a little stressed but after a couple minutes i barely noticed it and got used to :)
@@TheyCalledMeT that's mad. I could follow what he's saying but could never follow what he's doing
@@asdfghjklkjhgfdsa69 if you already know what he's trying to do, it's easier. ;) And there's always going back and/or slowing down for certain bits. I tend to watch JD at 2.3x for most things, though for a tutorial like this he seems to talk a bit faster?? so I only watched this at 1.8x. :)
(And if you're wondering how I got those speeds, it's because I'm using an extension: chrome.google.com/webstore/detail/video-speed-controller/nffaoalbilbmmfgbnbgppjihopabppdk )
@@DavidLindes 2.3x now that's mad xD
1.5 you're still somewhat able to hear and understand every word. people who speak fast are unwatchable at 1.5x but hey what ever you prefer ^^
I do not know why heavy oil constantly requires me to click change recipe just to get it to not stall out so I can get Lubricant from my Chomical plant. Basic oil (petroleum) does not need constant attention it works by itself fine. What is the difference ?
So which module should I use early?
But you can't research coal liquefaction without chemical research aka blue science flasks which are made from red circuits which require plastic.
2:10 ...Mustard Gas..... is the answer
Dude, you're a legend! Many thanks :)
you have the same picture
WAIT, IS THERE AN EPISODE PLAYTHRU OD THIS STUFF?? I STARTED ON BURNERBASE FIRST 30 MINUTES AND DIDNT SEE AN EPISODE SERIES TO FOLOW?
there are chemicals and liquids you can mix that react with each other to produce a gas but the thin is we call gas that we burn in cars, the liquid kind of gas something it is not cause it is not gas at all it is a liquid. many things are named in such a way and makes life rather confusing at times... Humans.
I am confused. I built this near identically in my world and I am barely getting any light oil. Maybe 4 of the plants get enough light oil to make solid fuel. Any ideas would be great.
Wait I think I know ur sister! Her Roblox account is Notjd_plays/Notjd_playz,right?
kind of late to this but my petroleum keeps backing up, stopping all refineries in the process ;d
I srsly hate asking for help but this shit just seems impenetrable for me ;;;;-;
then you have to build more stuff that needs petroleum ;) or save the excess in barrels or burn it (there is a mod that gives you flares to burn excess stuff)... there are many ways! welcome to factorio.