It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better ruclips.net/user/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
In der Gebrauchsanweisung vom Schrank steht das man die Rückwand einschneiden bzw. Ausschneiden muss. Bei dir im Video hast das nicht gemacht. Muss man das nicht unbedingt machen?
If this happens to you, it may be due to the lack of a magnet in the refrigerator door. insufficient supply from the manufacturer. you need to contact the service and they will add it. we had just such a case.
No. If this happens to you, it may be due to the lack of a magnet in the refrigerator door. insufficient supply from the manufacturer. you need to contact the service and they will add it. we had just such a case.
How did you manage to install the bottom shelf at exactly 56mm? I have the same setup, bet the door hinge is blocking the way. The minimum gap I can get is around 65mm.
I have the Koldgrader in a 200cm cabinet. As you stated the instructions show you to put the shelf at 56mm but it can't fit there as it bumps into the lower shelf. I set the shelf to 61mm exactly and the unit just fitted. If I were doing this again with same issue I would set the shelf so that it just sits above the hinge and that way you will have enough headroom. Perhaps ikea will fix the instructions. On plus side the fittings for the doors to the fridge/freezer are made more easier to do now (2024) than when these guys did their install.
Wonderfull detailed video. I could not have done it without you. Thanks for the time and expertise.
Glad to help
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better ruclips.net/user/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
Dude you are my hero and you DJ is my energy giver
Thank You
Bravo MASTER !!!!
Thank you!
Super helpful! Thanks!
Thank you too
Thank you for sharing this - great job with the installation.
Glad it was helpful!
great video it helped me a lot is it making noise?
excelente video me ayudo mucho esta haciendo ruido?
трохи шумить, як будь-який інший холодильник, не більше
Thanks ! Very helpful indeed
Glad to hear that!
thanks very helpful
happy to read that
great job
Thank you
Thank you👍
Welcome 👍
watched this at double speed and still fell asleep
Thanks 🙏
GREAT!~
In der Gebrauchsanweisung vom Schrank steht das man die Rückwand einschneiden bzw. Ausschneiden muss.
Bei dir im Video hast das nicht gemacht. Muss man das nicht unbedingt machen?
How do u turn the light off the fridge?
Is it on permanently?
If this happens to you, it may be due to the lack of a magnet in the refrigerator door. insufficient supply from the manufacturer. you need to contact the service and they will add it. we had just such a case.
No. If this happens to you, it may be due to the lack of a magnet in the refrigerator door. insufficient supply from the manufacturer. you need to contact the service and they will add it. we had just such a case.
Hi! Whats the plastic part that are stucked on the fridge called at IKEA?
How did you manage to install the bottom shelf at exactly 56mm? I have the same setup, bet the door hinge is blocking the way. The minimum gap I can get is around 65mm.
I have the Koldgrader in a 200cm cabinet. As you stated the instructions show you to put the shelf at 56mm but it can't fit there as it bumps into the lower shelf. I set the shelf to 61mm exactly and the unit just fitted. If I were doing this again with same issue I would set the shelf so that it just sits above the hinge and that way you will have enough headroom. Perhaps ikea will fix the instructions. On plus side the fittings for the doors to the fridge/freezer are made more easier to do now (2024) than when these guys did their install.
Very helpful 👍
I´m glad to hear that
Hello, can you give me your feedback after 1 year of utilisation ? thanks ! :)
I am quite satisfied, larger interior space, plastic drawers of the freezer prone to cracking under heavy load
Is it a good fridge?
Good question
good
good
Wow this is great. Do you happen to install ikea kitchens in Atlanta?
Oh i live in Europe
From where i can buy the doors connector?
doors connector included in freezer packing
If you buy ikea fridge...they are included
hey, I have to get the styrofoam out next to the fan in the fridge
hey, maybe this is production defect
@@PrideCZso you do not have styrofoam in the fan coil? I am trying to remove it but it doesn't come off. Could you check it?
Did you find a way to remove the styrofoam at the end?
@@michelecavallo9560 I was looking for the exact same thing. I also have styrofoam in there. And dont know how or if I have to remove it.
@@KatjadeWaart.Did you have to remove the styrofoam? Thank you 😊
How to buy for online
check your local IKEA web
Oh look. Another silent picture! Ugh!
The beep sound is so annoying and loud
ha ha ha.. dude doesn't know how to use caliper
✨