Servo set up on Roban Bell 412

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024

Комментарии •

  • @eatsleepreef9565
    @eatsleepreef9565 4 года назад

    What is a good head speed you would recommend for this heli? I’ll be running the scorpion 450kv setup.

  • @eatsleepreef9565
    @eatsleepreef9565 4 года назад

    Question. Seen this looks to be a 120deg swash setup, if the radio has no mixing since all is done on FBL why when you give it forward elevator does the swash not move forward like a regular 3d heli? The only way I can see it doing what yours are showing would be a mixing in the radio or telling the FBL it’s not a 120deg swash.

    • @eatsleepreef9565
      @eatsleepreef9565 4 года назад +1

      After thinking about it. I think the only way to get a 120 swash to do what your shows is having front left servo be aileron front right elevator and rear being pitch. I believed this is called a 120deg side configuration.

    • @eatsleepreef9565
      @eatsleepreef9565 4 года назад

      JestRR thanks much for taking the time. I will
      Be building one next week so that certainly clarified my thoughts. Thanks.

  • @amitten
    @amitten 7 лет назад

    I've tried the Demon and couldn't get the damn thing to work. I went with ikon and everything runs pretty smooth.
    Btw do you change your mix setting on your radio for multi blade heads?

    • @amitten
      @amitten 7 лет назад

      JestRR I'm not sure the circumstance of the guy you mentioned in the video, I'm just not used to the Demon as I am the ikon.

  • @roachcoachhelis6387
    @roachcoachhelis6387 4 года назад

    I finally found someone else using a Naza cool can I pick your brain for your gain set-ups please