2.A regular hexagonal lamina of side 20 mm rests on its sides on HP such that it is perpendicular to VP and inclined to the HP at 450 . It’s corner nearest to VP is 15 mm away from VP. Draw its projection.
Sir second stage me angle 60 or third stage me angle 45 hona chahiye tha na.... according to the question... Rest everything is cleared... thank you sir
here in the above problem 45 makes an inclination with HP and the Plane is in HP hence we have chosen 45 angle in 2nd stage and 60 Angle in 3rd stage.. Hope things are clear 😊
@@adityakhandaresir you mean if the question is hexagonal plane having edge on vp then we will consider inclined vp as second stage and in third stage we will consider inclined hp am I right sir
Thank you for this nice explanation sir. I have a doubt, at 6:34 , you put the sharp leg of compass at c'd' rather than a'f' to measure out the points in inclined line. would it be correct for unsymmetric figure as well , like pentagon , heptagon ?
Very simple 360/6 equals to 60° Other way around take distance equal to side of hexagon... Draw a circle and with same distance divide the circle into 6 parts.. You will get 6 points and join them.. You will get wonderful Hexagon
Condition is the plane is making 60° angle 📐 with H. P so you can take both ways from right side as well as from left side only the plane should satisfy the given condition
Draw the projections of a regular hexagon of 25 mm side, having one of its sides in the H.P. and inclined at 60° to the V.P., and its surface making an angle of 45° with the H.P.
Thank you. Its good that you explained step by step.
Glad it was helpful!
Tq sir ❤️
Thank you for your valuable feedback
Thanks 😮
Welcome 😊
Thankful to you sir
Thank you so much! This just saved me on my engineering drawing.
Most welcome🎉
Nice teaching sis ur video was so helpful to me
Glad it was helpful! Thank You
Thank you sir 😊
Most welcome
thanks sir
Most welcome
Thank u very much sir ...there is no doubt 😊
Most welcome dear hope it will be more help for rest other topics.. Do go through other video
Thank you
You're welcome
Thanks 👍 sir
So nice of you
2.A regular hexagonal lamina of side 20 mm rests on its sides on HP such that it is
perpendicular to VP and inclined to the HP at 450
. It’s corner nearest to VP is 15
mm away from VP. Draw its projection.
Nyc explanation sir ❤
Thanks for liking
Sir second stage me angle 60 or third stage me angle 45 hona chahiye tha na.... according to the question...
Rest everything is cleared... thank you sir
whenever it is mentioned in the question surface is making an angle with with HP or VP it is to be considered in 2nd stage and rest in 3rd Stage
here in the above problem 45 makes an inclination with HP and the Plane is in HP hence we have chosen 45 angle in 2nd stage and 60 Angle in 3rd stage..
Hope things are clear 😊
@@adityakhandaresir you mean if the question is hexagonal plane having edge on vp then we will consider inclined vp as second stage and in third stage we will consider inclined hp am I right sir
Thank u very much sir.
Happy learning dear
Thank you for this nice explanation sir. I have a doubt, at 6:34 , you put the sharp leg of compass at c'd' rather than a'f' to measure out the points in inclined line. would it be correct for unsymmetric figure as well , like pentagon , heptagon ?
As the top view figure is symmetric both the distances are same you can take any distance that is either c'd' Or a'f' in this problem
The basic idea is to measure the distance from the FV of 1stage to FV of 2nd stage
@@adityakhandare ok , thank you sir
What happen if its regular pentagon in place of regular hexagon i am not able to make at 60 deg projection of it Need Help
Please refer the video once again and you will find the solution replace Hexagone with pentagone
Best explanation sir 👌👍
Thank you so much all for students like you
Very coolly explained Sir 🙏
Thank you Piyush
Tq very much sir 🙏🙏
Most welcome Dear
Thank you sir
Most welcome dear happy learning
Thank you so much sir. Sir but one doubt how much length 60° angle line please tell me sir
The length of line at 60° is front view length of first stage
Bro thankyou bro
Very good teaching sir
Thank you Sir
Thank you Sir
Hexagon banane k liye kitne degree ka angle chahiye
Very simple 360/6 equals to 60°
Other way around take distance equal to side of hexagon... Draw a circle and with same distance divide the circle into 6 parts.. You will get 6 points and join them.. You will get wonderful Hexagon
i understood sir tq for done this video 😊😊
Yes most welcome🎉 happy learning
Sir, how to draw that 60° angle. I have seen another vdo and in that it is taken from opp side. i.e it's going in right side. I'm so confused 🤔
Condition is the plane is making 60° angle 📐 with H. P so you can take both ways from right side as well as from left side only the plane should satisfy the given condition
Draw the projections of a regular hexagon of 25 mm side, having one of its sides in the H.P. and inclined at 60° to the V.P., and its surface making an angle of 45° with the
H.P.
sir please tell me which book question is this. if you tell me then it will be very helpful for me ( this question is from wich book
N. D. Bhatt is the reference book you could refer
Drawing pen se banyae dikhta nhib h
Thank you 🙂👌
Thank you 💕dear
Kya sound quality hai dusre kamre tak sunai de rahi
Thank you dera
Really? what’s that? If you’re speaking Hindi, you should specify earlier on. That’s it’s for Hindi speakers.
Thank you for your constructive feedback
speak in english pls
Very good teaching sir
Thank you Swati